From cb7fadab988e8e5271c408b9b70068213cd310c9 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 7 Dec 2020 18:58:02 +0100 Subject: [PATCH] arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements [ Upstream commit 3d07c3b3a886fefd583c1b485b5e4e3c4e2da493 ] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. On similar boards with the same PHY this fixes an issue where Ethernet link would not come up when using ip link set down/up. Fixes: ed5e8f689154 ("arm64: dts: meson: g12a: x96-max: fix the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl Signed-off-by: Stefan Agner Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/12506964ca5d5f936579a280ad0a7e7f9a0a2d4c.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 1b07c8c06eac..463a72d6bb7c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -340,7 +340,7 @@ eee-broken-1000t; reset-assert-us = <10000>; - reset-deassert-us = <30000>; + reset-deassert-us = <80000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; interrupt-parent = <&gpio_intc>; -- 2.17.1