From 88b643963a280b15923b2296b8387100f5fd97a6 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 2 Jun 2021 11:05:19 +0800 Subject: [PATCH] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT For eSDHC, power supply is through peripheral circuit. So, 3.3V power supply capability from register bit does not reflect the truth. 3.3V is common for SD/MMC, and is supported for all boards with eSDHC in current u-boot. So, let's use a Kconfig CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT making 3.3V is supported in default. This is also a fix-up for one previous patch, which converted to use IS_ENABLED() for CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 that is not a Kconfig option. Fixes: 52faec31827e ("mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()") Signed-off-by: Yangbo Lu --- drivers/mmc/Kconfig | 7 +++++++ drivers/mmc/fsl_esdhc.c | 8 +++++--- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index f7620c9cd1..52f622b9fc 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -786,6 +786,13 @@ config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND This option assumes no hotplug, and u-boot has to make all the way to to linux to use 1.8v UHS-I speed mode if has card. +config FSL_ESDHC_VS33_NOT_SUPPORT + bool "3.3V power supply not supported" + depends on FSL_ESDHC + help + For eSDHC, power supply is through peripheral circuit. 3.3V support is + common. Select this if 3.3V power supply not supported. + config FSL_ESDHC_IMX bool "Freescale/NXP i.MX eSDHC controller support" help diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 7501fdb71e..b3c71c8695 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc - * Copyright 2019-2020 NXP + * Copyright 2019-2021 NXP * Andy Fleming * * Based vaguely on the pxa mmc code: @@ -795,10 +795,12 @@ static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv, u32 caps; caps = esdhc_read32(®s->hostcapblt); + + if (!IS_ENABLED(CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT)) + caps |= HOSTCAPBLT_VS33; + if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135)) caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30); - if (IS_ENABLED(CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33)) - caps |= HOSTCAPBLT_VS33; if (caps & HOSTCAPBLT_VS18) cfg->voltages |= MMC_VDD_165_195; if (caps & HOSTCAPBLT_VS30) -- 2.17.1