Merge tag 'drm-misc-next-2020-03-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - dp-mst: Remove register_connector callback, add drm_dp_destroy_connector
  - Changes to scnprintf on multiple instances

Driver Changes:
  - meson: Support for YUV420
  - panel: Support Ortustech COM37H3M, idk-1110wr and idk-2121wr,
           multiple dotclock fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200317082858.lubmvlmvoprn2tuh@gilmour.lan

Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next

- Disable DMA when using SEV encryption
- An -RT fix
- Code cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Thomas Hellstrom (VMware)" <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200316105212.26504-1-thomas_os@shipmail.org

Merge tag 'drm-intel-next-2020-03-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on
construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing
various engine properties

GVT Changes:

VFIO edid getting expanded to all platforms and a big cleanup around attr
group, unused vblank complete, kvmgt, Intel engine and dev_priv usages.

i915 Changes:

- new UAPI to allow userspace to specify CS ring buffer size on construction
  (I915_CONTEXT_PARAM_RINGSIZE) -  (Chris)
- New sysfs entries exposing various engine properties (Chris)
- Tiger Lake is out of require_force_probe protection (Jose)
- Changes in many places around active requests, reset and heartbeat (Chris)
- Stop assigning drm-dev_private pointer (Jani)
- Many code refactor in many places, including intel_modeset_init,
  increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani)
- Fixes around display pipe iterators (Anshuman)
- Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele,
  Jose, Anusha, Vivek, Swathi, Caz. Kai)
- Code clean-up like reducing use of drm/i915_drv.h, removing unused
  registers, removing garbage warns, and some other code polishing (Jani, Lucas,
  Ville)
- Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld)
- Fix plane possible_crtcs bit mask (Anshuman)
- Fixes and cleanup on GLK pre production identification and w/a (Ville)
- Fix display orientation on few cases (Hans, Ville)
- dbuf clean-up and improvements for slice arrays handling (Ville)
- Improvement around min cdclk calculation (Stanislav)
- Fixes and refactor around display PLLs (Imre)
- Other execlists and perf fixes (Chris)
- Documentation fixes (Jani, Chris)
- Fix build issue (Anshuman)
- Many more fixes around the locking mechanisms (Chris)
- Other fixes and debugability info around preemption (Chris, Tvrtko)
- Add mechanism to submit a context WA on ring submission (Mika)
- Clear all Eu/L3 resitual context (Prathap)
- More changes around local memory (Abdiel, Matt, Chris)
- Fix RPS (Chris)
- DP MST fix (Lyude)
- Display FBC fixes (Jose, RK)
- debugfs cleanup (Tvrtko)
- More convertion towards drm_debive based loggin (Wambui, Ram)
- Avoid potential buffer overflow (Takashi)
- Ice Lake and Elkhart Lake workarounds (Matt Roper)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com

Merge tag 'drm/tegra/for-5.7-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v5.7-rc1

This contains some minor cleanups, nothing too exciting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313171042.2924890-1-thierry.reding@gmail.com

drm: Mark up racy check of drm_gem_object.handle_count

[ 1715.899800] BUG: KCSAN: data-race in drm_gem_handle_create_tail / drm_gem_object_handle_put_unlocked
[ 1715.899838]
[ 1715.899861] write to 0xffff8881830f3604 of 4 bytes by task 7834 on cpu 1:
[ 1715.899896]  drm_gem_handle_create_tail+0x62/0x250
[ 1715.899927]  drm_gem_open_ioctl+0xc1/0x160
[ 1715.899956]  drm_ioctl_kernel+0xe4/0x120
[ 1715.899981]  drm_ioctl+0x297/0x4c7
[ 1715.900003]  ksys_ioctl+0x89/0xb0
[ 1715.900027]  __x64_sys_ioctl+0x42/0x60
[ 1715.900052]  do_syscall_64+0x6e/0x2c0
[ 1715.900079]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1715.900100]
[ 1715.900119] read to 0xffff8881830f3604 of 4 bytes by task 8137 on cpu 0:
[ 1715.900149]  drm_gem_object_handle_put_unlocked+0x31/0x130
[ 1715.900180]  drm_gem_object_release_handle+0x93/0xe0
[ 1715.900208]  drm_gem_handle_delete+0x7b/0xe0
[ 1715.900235]  drm_gem_close_ioctl+0x61/0x80
[ 1715.900264]  drm_ioctl_kernel+0xe4/0x120
[ 1715.900291]  drm_ioctl+0x297/0x4c7
[ 1715.900316]  ksys_ioctl+0x89/0xb0
[ 1715.900340]  __x64_sys_ioctl+0x42/0x60
[ 1715.900363]  do_syscall_64+0x6e/0x2c0
[ 1715.900388]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309120151.7675-1-chris@chris-wilson.co.uk

drm/mm: Allow drm_mm_initialized() to be used outside of the locks

Mark up the potential racy read in drm_mm_initialized(), as we want a
cheap and cheerful check:

[  121.098731] BUG: KCSAN: data-race in _i915_gem_object_create_stolen [i915] / rm_hole
[  121.098766]
[  121.098789] write (marked) to 0xffff8881f01ed330 of 8 bytes by task 3568 on cpu 3:
[  121.098831]  rm_hole+0x64/0x140
[  121.098860]  drm_mm_insert_node_in_range+0x3d3/0x6c0
[  121.099254]  i915_gem_stolen_insert_node_in_range+0x91/0xe0 [i915]
[  121.099646]  _i915_gem_object_create_stolen+0x9d/0x100 [i915]
[  121.100047]  i915_gem_object_create_region+0x7a/0xa0 [i915]
[  121.100451]  i915_gem_object_create_stolen+0x33/0x50 [i915]
[  121.100849]  intel_engine_create_ring+0x1af/0x280 [i915]
[  121.101242]  __execlists_context_alloc+0xce/0x3d0 [i915]
[  121.101635]  execlists_context_alloc+0x25/0x40 [i915]
[  121.102030]  intel_context_alloc_state+0xb6/0xf0 [i915]
[  121.102420]  __intel_context_do_pin+0x1ff/0x220 [i915]
[  121.102815]  i915_gem_do_execbuffer+0x46b4/0x4c20 [i915]
[  121.103211]  i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[  121.103244]  drm_ioctl_kernel+0xe4/0x120
[  121.103269]  drm_ioctl+0x297/0x4c7
[  121.103296]  ksys_ioctl+0x89/0xb0
[  121.103321]  __x64_sys_ioctl+0x42/0x60
[  121.103349]  do_syscall_64+0x6e/0x2c0
[  121.103377]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  121.103403]
[  121.103426] read to 0xffff8881f01ed330 of 8 bytes by task 3109 on cpu 1:
[  121.103819]  _i915_gem_object_create_stolen+0x30/0x100 [i915]
[  121.104228]  i915_gem_object_create_region+0x7a/0xa0 [i915]
[  121.104631]  i915_gem_object_create_stolen+0x33/0x50 [i915]
[  121.105025]  intel_engine_create_ring+0x1af/0x280 [i915]
[  121.105420]  __execlists_context_alloc+0xce/0x3d0 [i915]
[  121.105818]  execlists_context_alloc+0x25/0x40 [i915]
[  121.106202]  intel_context_alloc_state+0xb6/0xf0 [i915]
[  121.106595]  __intel_context_do_pin+0x1ff/0x220 [i915]
[  121.106985]  i915_gem_do_execbuffer+0x46b4/0x4c20 [i915]
[  121.107375]  i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[  121.107409]  drm_ioctl_kernel+0xe4/0x120
[  121.107437]  drm_ioctl+0x297/0x4c7
[  121.107464]  ksys_ioctl+0x89/0xb0
[  121.107489]  __x64_sys_ioctl+0x42/0x60
[  121.107511]  do_syscall_64+0x6e/0x2c0
[  121.107535]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309121529.16497-1-chris@chris-wilson.co.uk

drm/edid: Distribute switch variables for initialization

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, lift such variables up into the next code
block.

drivers/gpu/drm/drm_edid.c: In function ‘drm_edid_to_eld’:
drivers/gpu/drm/drm_edid.c:4395:9: warning: statement will never be
executed [-Wswitch-unreachable]
 4395 |     int sad_count;
      |         ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

v2: move into function block instead being switch-local (Ville Syrjälä)

Signed-off-by: Kees Cook <keescook@chromium.org>
[danvet: keep the changelog]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/202003060930.DDCCB6659@keescook

drm/vmwgfx: Replace zero-length array with flexible-array member

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm: lock: Clean up documentation

Fix kernel doc comments to avoid warnings when compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306102937.4932-2-benjamin.gaignard@st.com

drm: bufs: Clean up documentation

Fix kernel doc comments to avoid warnings when compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306102937.4932-3-benjamin.gaignard@st.com

drm: vm: Clean up documentation

Fix kernel doc comments to avoid warnings when compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306102937.4932-1-benjamin.gaignard@st.com

drm: context: Clean up documentation

Fix kernel doc comments to avoid warnings when compiling with W=1.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306102937.4932-4-benjamin.gaignard@st.com

dt-bindings: display: Add idk-1110wr binding

Add binding for the idk-1110wr LVDS panel from Advantech.

Some panel-specific documentation can be found here:
https://buy.advantech.eu/Displays/Embedded-LCD-Kits-LCD-Kit-Modules/model-IDK-1110WR-55WSA1E.htm

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583957020-16359-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com

drm/tiny: fix sparse warning: incorrect type in assignment (different base types)

This fixes the following sparse warning:

drivers/gpu/drm/tiny/ili9486.c:61:16: sparse: sparse: incorrect type in assignment (different base types)
drivers/gpu/drm/tiny/ili9486.c:61:16: sparse:    expected unsigned short [usertype]
drivers/gpu/drm/tiny/ili9486.c:61:16: sparse:    got restricted __be16 [usertype]
drivers/gpu/drm/tiny/ili9486.c:71:32: sparse: sparse: incorrect type in assignment (different base types)
drivers/gpu/drm/tiny/ili9486.c:71:32: sparse:    expected unsigned short [usertype]
drivers/gpu/drm/tiny/ili9486.c:71:32: sparse:    got restricted __be16 [usertype]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583684084-4694-1-git-send-email-kamlesh.gurudasani@gmail.com

drm/i915: Update DRIVER_DATE to 20200313

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

dt-bindings: display: fix panel warnings

Fix following type af warnings in the panel bindings:

Warning (unit_address_vs_reg): /example-0/dsi/panel: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /example-0/dsi@ff450000: node has a unit name, but no reg property

Removing the "@xxx" from the node name fixed first warning.
Adding a missing reg property fixed the second warning

v2:
  - renamed mdss_dsi to dsi in panel-simple-dsi.yaml (Rob)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200308115017.18563-2-sam@ravnborg.org

drm/i915/tgl: Remove require_force_probe protection

We have a few TGL machines in our CI and it is mostly green with
failures in tests that will not impact future Linux installations.
Also there is no warnings, errors, flickering or any visual defects
while doing ordinary tasks like browsing and editing documents in a
dual monitor setup.

As a reminder i915.require_force_probe was created to protect
future Linux installation's iso images that might contain a
kernel from the enabling time of the new platform. Without this
protection most of linux installation was recommending
nomodeset option during installation that was getting stick
there after installation.

Reference: https://intel-gfx-ci.01.org/tree/drm-tip/fi-tgl-u.html
Reference: https://intel-gfx-ci.01.org/tree/drm-tip/shard-tglb.html
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200218230822.66801-1-jose.souza@intel.com

drm/dp_mst: Convert drm_dp_mst_topology_mgr.is_waiting_for_dwn_reply to bitfield

Small nitpick that I noticed a second ago - we can save some space in
the struct by making this a bitfield and sticking it with the rest of
the bitfields. Also, some small cleanup to the kdocs for this member.

There should be no functional changes in this patch.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194846.16025-1-lyude@redhat.com

drm/tegra: hdmi: Silence deferred-probe error

Driver fails to probe with -EPROBE_DEFER, which produces a bit noisy error
message in KMSG during kernel's boot up. This happens because voltage
regulators tend to be probed later than the DRM driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: dc: Silence RGB output deferred-probe error

Driver fails to probe with -EPROBE_DEFER if display output isn't ready
yet. This produces a bit noisy error message in KMSG during kernel's boot
up on Tegra20 and Tegra30 because RGB output tends to be probed earlier
than a corresponding voltage regulator driver.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/i915: Add Wa_1605460711 / Wa_1408767742 to ICL and EHL

This workaround appears under two different numbers (and with somewhat
confused stepping applicability on ICL).  Ultimately it appears we
should just implement this for all stepping of ICL and EHL.

Note that this is identical to Wa_1407928979:tgl that already exists in
our driver too...yet another number referencing the same actual
workaround.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-7-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Apply Wa_1406680159:icl,ehl as an engine workaround

The register this workaround updates is a render engine register in the
MCR range, so we should initialize this in rcs_engine_wa_init() rather
than gt_wa_init().

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1222
Fixes: 36204d80bacb ("drm/i915/icl: Wa_1406680159")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-6-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Add Wa_1406306137:icl,ehl

v2:
 - Move to context workarounds.  ROW_CHICKEN4 is part of the context
   image on gen11 (although it isn't on gen12).

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-5-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Add Wa_1604278689:icl,ehl

The bspec description for this workaround tells us to program
0xFFFF_FFFF into both FBC_RT_BASE_ADDR_REGISTER_* registers, but we've
previously found that this leads to failures in CI.  Our suspicion is
that the failures are caused by this valid turning on the "address valid
bit" even though we're intentionally supplying an invalid address.
Experimentation has shown that setting all bits _except_ for the
RT_VALID bit seems to avoid these failures.

v2:
 - Mask off the RT_VALID bit.  Experimentation with CI trybot indicates
   that this is necessary to avoid reset failures on BCS.

v3:
 - Program RT_BASE before RT_BASE_UPPER so that the valid bit is turned
   off by the first write.  (Chris)

Bspec: 11388
Bspec: 33451
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-4-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Add Wa_1209644611:icl,ehl

On gen11 the XY_FAST_COPY_BLT command has some size restrictions on its
usage.  Although this instruction is mainly used by userspace, i915 also
uses it to copy object contents during some selftests, so let's ensure
the restrictions are followed.

Bspec: 6544
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-3-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Handle all MCR ranges

The bspec documents multiple MCR ranges; make sure they're all captured
by the driver.

Bspec: 13991, 52079
Fixes: 592a7c5e082e ("drm/i915: Extend non readable mcr range")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/selftest: Add more poison patterns

Throw in the inverse patterns to create more examples of poison to use
against the LRC state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200313102812.30173-1-chris@chris-wilson.co.uk

Merge tag 'amd-drm-next-5.7-2020-03-10' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.7-2020-03-10:

amdgpu:
- SR-IOV fixes
- Fix up fallout from drm load/unload callback removal
- Navi, renoir power management watermark fixes
- Refactor smu parameter handling
- Display FEC fixes
- Display DCC fixes
- HDCP fixes
- Add support for USB-C PD firmware updates
- Pollock detection fix
- Rework compute ring priority handling
- RAS fixes
- Misc cleanups

amdkfd:
- Consolidate more gfx config details in amdgpu
- Consolidate bo alloc flags
- Improve code comments
- SDMA MQD fixes
- Misc cleanups

gpu scheduler:
- Add suport for modifying the sched list

uapi:
- Clarify comments about GEM_CREATE flags that are not used by userspace.
  The kernel driver has always prevented userspace from using these.
  They are only used internally in the kernel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310212748.4519-1-alexander.deucher@amd.com

Revert "drm/i915/tgl: Add extra hdc flush workaround"

This reverts commit 36a6b5d964d995b536b1925ec42052ee40ba92c4.

The commit takes care Wa_1604544889 which was fixed on a0 stepping based on
a0 replan. So no SW workaround is required on any stepping now.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 36a6b5d964d9 ("drm/i915/tgl: Add extra hdc flush workaround")
Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com

drm/i915/gt: Wait for RCUs frees before asserting idle on unload

During driver unload, we have many asserts that we have released our
bookkeeping structs and are idle. In some cases, these struct are
protected by RCU and we do not release them until after an RCU grace
period.

Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 130a95e9098e ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312115307.16460-1-chris@chris-wilson.co.uk

drm/i915/selftests: Use igt_random_offset()

Switch igt_vm_isolation() to using igt_random_offset().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312154708.1720-1-chris@chris-wilson.co.uk

drm/i915/gem: Drop relocation slowpath

Since the relocations are no longer performed under a global
struct_mutex, or any other lock, that is also held by pagefault handlers,
we can relax and allow our fast path to take a fault. As we no longer
need to abort the fast path for lock avoidance, we no longer need the
slow path handling at all.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311160310.26711-1-chris@chris-wilson.co.uk

drm/vmwgfx: Remove a few unused functions

I noticed that there is a prototype for vmw_fifo_ping_host_locked() but
no function. Then I looked further and noticed more functions which are
not used anymore or functions protoypes which remained after the
function was removed.

Remove unused function (prototypes).

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Drop preempt_disable() in vmw_fifo_ping_host()

vmw_fifo_ping_host() disables preemption around a test and a register
write via vmw_write(). The write function acquires a spinlock_t typed
lock which is not allowed in a preempt_disable()ed section on
PREEMPT_RT. This has been reported in the bugzilla.

It has been explained by Thomas Hellstrom that this preempt_disable()ed
section is not required for correctness.

Remove the preempt_disable() section.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206591
Link: https://lkml.kernel.org/r/0b5e1c65d89951de993deab06d1d197b40fd67aa.camel@vmware.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/i915/gen12: Disable preemption timeout

Allow super long OpenCL workloads which cannot be preempted within
the default timeout to run out of the box.

v2:
 * Make it stick out more and apply only to RCS. (Chris)

v3:
 * Mention platform override in kconfig. (Joonas)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michal Mrozek <Michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200312115748.29970-1-tvrtko.ursulin@linux.intel.com

drm/vmwgfx: Refuse DMA operation when SEV encryption is active

TTM doesn't yet fully support mapping of DMA memory when SEV is active,
so in that case, refuse DMA operation. For guest-backed object operation
this means 3D acceleration will be disabled. For host-backed, VRAM will be
used for data transfer between the guest and the device.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

drm/vmwgfx: Fix the refuse_dma mode when using guest-backed objects

When we refuse DMA from system pages for whatever reason, we don't
handle that correctly when guest-backed objects was enabled.
Since guest-backed objects by definition require DMA to and from
system pages, disable all functionality that relies on them.
That basically amounts to 3D acceleration and screen targets.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

drm/tegra: dc: Release PM and RGB output when client's registration fails

Runtime PM and RGB output need to be released when host1x client
registration fails. The releasing is missed in the code, let's correct it.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

drm/tegra: dc: Use devm_platform_ioremap_resource

The devm_platform_ioremap_resource() helper replaces few lines of a
boilerplate code with a single line, making code to look cleaner a tad.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'drm-misc-next-2020-03-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.7:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:

Driver Changes:
 - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector
 - fbdev: some cleanups and dead-code removal
 - Conversions to simple-encoder
 - zero-length array removal
 - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida
   KD35T133,

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour

drm/i915/gem: Take a copy of the engines for context_barrier_task

When applying the context-barrier, we only care about the current
engines, as the next set of engines will be naturally after the barrier.
So we can skip holding the ctx->engines_mutex while constructing the
request by taking a sneaky reference to the i915_gem_engines instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311221739.30375-2-chris@chris-wilson.co.uk

drm/i915/gem: Mark up sw-fence notify function

The sw-fence notify function requires to be at least 4-byte aligned so
that we can use the low bits in the function pointer for internal fence
flags. Make it so.

References: https://gitlab.freedesktop.org/drm/intel/issues/1433
Fixes: 42fb60de3129 ("drm/i915/gem: Don't leak non-persistent requests on changing engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311221739.30375-1-chris@chris-wilson.co.uk

drm: Remove drm dp mst destroy_connector callbacks

drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector((drm_connector_unregister()/drm_connector_put())) except for
amdgpu_dm driver where some amdgpu_dm specific code in there.

This connector cleaning up is now being handled in the drm core so
driver destroy_connector callbacks are not needed (except for
amdgpu_dm) hence remove them.

Removal is done with below sementic patch:

@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
-        .destroy_connector = func
};

@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-6-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm: Add drm_dp_destroy_connector helper and use it

drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical
amongst every driver and don't do anything other than cleaning up the
connector (drm_connector_unregister()/drm_connector_put()) except for
amdgpu_dm driver where some amdgpu_dm specific code in there which I
an not sure if it should stay or not.

Create and use a helper which calls driver's destroy_connector hook if
available otherwise does cleanup internally.

This is the step towards removing identical hooks from every driver.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-5-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/dp_mst: Remove register_connector callback

Now drm_dp_mst_topology_cbs.register_connector callback is not getting
used anymore hence remove it.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-4-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm: Remove dp mst register connector callbacks

drm_dp_mst_port_add_connector() directly calls the
drm_connector_register() now and
drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting
called anymore.

Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector
callbacks.

This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.

The removal is done with below sementic patch:

@r1@
identifier func, E;
@@
struct drm_dp_mst_topology_cbs E = {
...,
-        .register_connector = func
};

@delete depends on r1@
identifier r1.func;
@@
- static void func(...){...}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-3-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm: Register connector instead of calling register_connector callback

drm_dp_mst_topology_mgr_cbs.register_connector callbacks are literally
identical amongst every driver and don't do anything other than
calling drm_connector_register(). Hence call drm_connector_register()
directly instead of a callback.

This is the preparatory step for removing the
drm_dp_mst_topology_mgr_cbs.register_connector callback hook.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-2-pankaj.laxminarayan.bharadiya@intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/edid: Add function to parse EDID descriptors for monitor range

Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers

v6:
* Call it monitor_range (Ville)
v5:
* Use the renamed flags
v4:
* Use is_display_descriptor() (Ville)
* Name the monitor range flags (Ville)
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com

drm/edid: Name the detailed monitor range flags

This patch adds defines for the detailed monitor
range flags as per the EDID specification.

v2:
* Rename the flags with DRM_EDID_ (Jani N)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-1-manasi.d.navare@intel.com

drm/i915: Add missing HDMI audio pixel clocks for gen12

Gen12 hardware supports HDMI audio pixel clocks of 296.7/297Mhz
and 593.4/594Mhz. Add the missing rates and add logic to ignore
them if running on older hardware.

Bspec: 49333
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310162338.9387-1-kai.vehmanen@linux.intel.com

drm/panel-simple: Fix dotclock for Logic PD Type 28

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Adam Ford <aford173@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com
Reviewed-by: Adam Ford <aford173@gmail.com>

drm/panel-sony-acx424akp: Fix dotclocks

The currently listed dotclocks disagree with the currently
listed vrefresh rates. Change the dotclocks to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-9-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

drm/panel-lg-lg4573: Fix dotclock

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Heiko Schocher <hs@denx.de>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com
Reviewed-by: Heiko Schocher <hs@denx.de>

drm/panel-ilitek-ili9322: Fix dotclocks

The listed dotclocks are two orders of mangnitude out.
Fix them.

v2: Just divide everything by 100 (Linus)

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309133809.32585-1-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

drm/panel-novatek-nt35510: Fix dotclock

The dotclock is three orders of magnitude out. Fix it.

v2: Just set it to 20MHz (Linus)

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309133644.32385-1-ville.syrjala@linux.intel.com
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

drm: sysfs: Use scnprintf() for avoiding potential buffer overflow

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311073540.7108-1-tiwai@suse.de

drm/i915/gem: Mark up the racy read of the mmap_singleton

[11057.642683] BUG: KCSAN: data-race in i915_gem_mmap [i915] / singleton_release [i915]
[11057.642717]
[11057.642740] write (marked) to 0xffff8881f24471a0 of 8 bytes by task 44668 on cpu 2:
[11057.643162]  singleton_release+0x38/0x60 [i915]
[11057.643192]  __fput+0x160/0x3c0
[11057.643217]  ____fput+0x16/0x20
[11057.643241]  task_work_run+0xba/0x100
[11057.643263]  exit_to_usermode_loop+0xe4/0xf0
[11057.643286]  do_syscall_64+0x27e/0x2c0
[11057.643314]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[11057.643339]
[11057.643359] read to 0xffff8881f24471a0 of 8 bytes by task 44667 on cpu 3:
[11057.643774]  i915_gem_mmap+0x295/0x670 [i915]
[11057.643802]  mmap_region+0x62b/0xac0
[11057.643825]  do_mmap+0x414/0x6b0
[11057.643848]  vm_mmap_pgoff+0xa9/0xf0
[11057.643875]  ksys_mmap_pgoff+0x1ac/0x2f0
[11057.643900]  do_syscall_64+0x6e/0x2c0
[11057.643924]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-3-chris@chris-wilson.co.uk

drm/i915/execlists: Track active elements during dequeue

Record the initial active element we use when building the next ELSP
submission, so that we can compare against it latter to see if there's
no change.

Fixes: 44d0a9c05bc0 ("drm/i915/execlists: Skip redundant resubmission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk

drm/i915/gt: Pull checking rps->pm_events under the irq_lock

Avoid angering kcsan by serialising the read of the pm_events with the
write in rps_disable_interrupts.

[ 6268.713419] BUG: KCSAN: data-race in intel_rps_park [i915] / rps_work [i915]
[ 6268.713437]
[ 6268.713449] write to 0xffff8881eda8efac of 4 bytes by task 1127 on cpu 3:
[ 6268.713680]  intel_rps_park+0x136/0x260 [i915]
[ 6268.713905]  __gt_park+0x61/0xa0 [i915]
[ 6268.714128]  ____intel_wakeref_put_last+0x42/0x90 [i915]
[ 6268.714352]  __intel_wakeref_put_work+0xd3/0xf0 [i915]
[ 6268.714369]  process_one_work+0x3b1/0x690
[ 6268.714384]  worker_thread+0x80/0x670
[ 6268.714398]  kthread+0x19a/0x1e0
[ 6268.714412]  ret_from_fork+0x1f/0x30
[ 6268.714423]
[ 6268.714435] read to 0xffff8881eda8efac of 4 bytes by task 950 on cpu 2:
[ 6268.714664]  rps_work+0xc2/0x680 [i915]
[ 6268.714679]  process_one_work+0x3b1/0x690
[ 6268.714693]  worker_thread+0x80/0x670
[ 6268.714707]  kthread+0x19a/0x1e0
[ 6268.714720]  ret_from_fork+0x1f/0x30

v2: Mark all reads and writes of rpm->pm_events.

The flow of enabling/disabling rps is stronly ordered, so the writes and
interrupt generation are also strongly ordered -- just this may not be
visible to the compiler, so provide annotations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-1-chris@chris-wilson.co.uk

drm/ttm: Use scnprintf() for avoiding potential buffer overflow

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/357174/
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915: Extend i915_request_await_active to use all timelines

Extend i915_request_await_active() to be able to asynchronously wait on
all the tracked timelines simultaneously.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092044.16353-1-chris@chris-wilson.co.uk

drm/i915/gt: Use scnprintf() for avoiding potential buffer overflow

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311073256.6535-1-tiwai@suse.de

drm/i915/overlay: convert to drm_device based logging.

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_overlay.c.
This transformation was achieved using the following coccinelle script:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Note that this converts DRM_DEBUG to drm_dbg().

Checkpatch warnings were addressed manually.

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ca3c14de13e308419caf33eb4bbf274f5387f1e0.1583766715.git.jani.nikula@intel.com

drm/i915/lvds: convert to drm_device based logging macros.

Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_lvds.c.
This transformation was done by the following coccinelle script that
matches based on the existence of a drm_i915_private device:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were fixed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e622ebd2ce07291f2db56174a0a0b31cc2df67df.1583766715.git.jani.nikula@intel.com

drm/i915/lpe_audio: convert to drm_device based logging macros.

Convert various uses of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_lpe_audio.c.

Note that this converts DRM_DEBUG to drm_dbg().

References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.html
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/98588d757a3729d7c8a4b1aaa0b5e7d160398b89.1583766715.git.jani.nikula@intel.com

drm/i915/hotplug: convert to drm_device based logging.

Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_hotplug.c.
In some cases, this involves extracting the drm_i915_private pointer from
the drm_device struct to be used in the logging macros.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3dfda89ab4a234f299ada77abd14163cef3f8bd4.1583766715.git.jani.nikula@intel.com

drm/i915/gmbus: convert to drm_device based logging,

Conversion instances of printk based drm logging macros to use the
struct drm_device based logging macros in i915/display/intel_gmbus.c.
This was done using the following coccinelle semantic patch that
transforms based on the existence of an existing drm_i915_private
device:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5964ce0a603e2ec0e6110c927a11234e66891258.1583766715.git.jani.nikula@intel.com

drm/i915/fifo_underrun: convert to drm_device based logging.

Convert various instances of the printk based drm logging macros to the
struct drm_device based logging macros in
i915/display/intel_fifo_underrun.c.
This was done using the following coccinelle script:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

New checkpatch warnings were addressed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e8e74494c8aa662ab3fb4de1dac63fedef35c47.1583766715.git.jani.nikula@intel.com

drm/i915/dsb: convert to drm_device based logging macros.

This converts uses of the printk based drm logging macros to the struct
drm_device logging macros in i915/display/intel_dsb.c. This was done
using the following coccinelle script:
@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Checkpatch warnings were fixed manually.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2e049c74146f5430ea95653a4f745224d36f960.1583766715.git.jani.nikula@intel.com

drm/ttm: fix false positive assert

The assert sometimes incorrectly triggers when pinned BOs are destroyed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Link: https://patchwork.freedesktop.org/patch/356737/

drm/i915: Remove debugfs i915_drpc_info and i915_forcewake_domains

The two files have been duplicated under the gt/ subdir and since there
are not apparent users looking for them at the old location lets simply
remove them and duplicated code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310164733.26487-1-tvrtko.ursulin@linux.intel.com

drm/rockchip: rgb: don't count non-existent devices when determining subdrivers

rockchip_drm_endpoint_is_subdriver() may also return error codes.
For example if the target-node is in the disabled state, so no
platform-device is getting created for it.

In that case current code would count that as external rgb device,
which in turn would make probing the rockchip-drm device fail.

So only count the target as rgb device if the function actually
returns 0.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121224828.4070067-1-heiko@sntech.de

drm/i915/execlists: Mark up data-races in virtual engines

The virtual engine passes tokens back and forth to its backing physical
engines.

[   57.372993] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915]
[   57.373012]
[   57.373023] write to 0xffff8881f47324c0 of 4 bytes by interrupt on cpu 2:
[   57.373241]  execlists_dequeue+0x6fa/0x2150 [i915]
[   57.373458]  __execlists_submission_tasklet+0x48/0x60 [i915]
[   57.373677]  execlists_submission_tasklet+0xd3/0x170 [i915]
[   57.373694]  tasklet_action_common.isra.0+0x42/0xa0
[   57.373709]  __do_softirq+0xd7/0x2cd
[   57.373723]  irq_exit+0xbe/0xe0
[   57.373735]  do_IRQ+0x51/0x100
[   57.373748]  ret_from_intr+0x0/0x1c
[   57.373963]  engine_retire+0x89/0xe0 [i915]
[   57.373977]  process_one_work+0x3b1/0x690
[   57.373990]  worker_thread+0x80/0x670
[   57.374004]  kthread+0x19a/0x1e0
[   57.374017]  ret_from_fork+0x1f/0x30
[   57.374027]
[   57.374038] read to 0xffff8881f47324c0 of 4 bytes by interrupt on cpu 3:
[   57.374256]  virtual_submission_tasklet+0x27/0x5a0 [i915]
[   57.374273]  tasklet_action_common.isra.0+0x42/0xa0
[   57.374288]  __do_softirq+0xd7/0x2cd
[   57.374302]  run_ksoftirqd+0x15/0x20
[   57.374315]  smpboot_thread_fn+0x1ab/0x300
[   57.374329]  kthread+0x19a/0x1e0
[   57.374342]  ret_from_fork+0x1f/0x30

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310141320.24149-3-chris@chris-wilson.co.uk

drm/i915: Mark up racy read of active rq->engine

As a virtual engine may change the rq->engine to point to the active
request in flight, we need to warn the compiler that an active request's
engine is volatile.

[   95.017686] write (marked) to 0xffff8881e8386b10 of 8 bytes by interrupt on cpu 2:
[   95.018123]  execlists_dequeue+0x762/0x2150 [i915]
[   95.018539]  __execlists_submission_tasklet+0x48/0x60 [i915]
[   95.018955]  execlists_submission_tasklet+0xd3/0x170 [i915]
[   95.018986]  tasklet_action_common.isra.0+0x42/0xa0
[   95.019016]  __do_softirq+0xd7/0x2cd
[   95.019043]  irq_exit+0xbe/0xe0
[   95.019068]  irq_work_interrupt+0xf/0x20
[   95.019491]  i915_request_retire+0x2c5/0x670 [i915]
[   95.019937]  retire_requests+0xa1/0xf0 [i915]
[   95.020348]  engine_retire+0xa1/0xe0 [i915]
[   95.020376]  process_one_work+0x3b1/0x690
[   95.020403]  worker_thread+0x80/0x670
[   95.020429]  kthread+0x19a/0x1e0
[   95.020454]  ret_from_fork+0x1f/0x30
[   95.020476]
[   95.020498] read to 0xffff8881e8386b10 of 8 bytes by task 8909 on cpu 3:
[   95.020918]  __i915_request_commit+0x177/0x220 [i915]
[   95.021329]  i915_gem_do_execbuffer+0x38c4/0x4e50 [i915]
[   95.021750]  i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[   95.021784]  drm_ioctl_kernel+0xe4/0x120
[   95.021809]  drm_ioctl+0x297/0x4c7
[   95.021832]  ksys_ioctl+0x89/0xb0
[   95.021865]  __x64_sys_ioctl+0x42/0x60
[   95.021901]  do_syscall_64+0x6e/0x2c0
[   95.021927]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310142403.5953-1-chris@chris-wilson.co.uk

drm/i915/gt: Mark up racy reads for intel_context.inflight

When being used across multiple real engines inside a virtual engine,
the intel_context.inflight is updated atomically, and so we must
annotate the racy read from outside the owning context.

[11142.482846] BUG: KCSAN: data-race in __execlists_submission_tasklet [i915] / __execlists_submission_tasklet [i915]
[11142.482867]
[11142.482878] write (marked) to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 2:
[11142.483107]  __execlists_submission_tasklet+0x1d33/0x2120 [i915]
[11142.483336]  execlists_submission_tasklet+0xd3/0x170 [i915]
[11142.483355]  tasklet_action_common.isra.0+0x42/0xa0
[11142.483371]  __do_softirq+0xd7/0x2cd
[11142.483384]  irq_exit+0xbe/0xe0
[11142.483401]  do_IRQ+0x51/0x100
[11142.483424]  ret_from_intr+0x0/0x1c
[11142.483446]  do_idle+0x133/0x1f0
[11142.483465]  cpu_startup_entry+0x14/0x16
[11142.483483]  start_secondary+0x120/0x180
[11142.483498]  secondary_startup_64+0xa4/0xb0
[11142.483512]
[11142.483528] read to 0xffff8881f257b5e0 of 8 bytes by interrupt on cpu 1:
[11142.483755]  __execlists_submission_tasklet+0x14e/0x2120 [i915]
[11142.483981]  execlists_submission_tasklet+0xd3/0x170 [i915]
[11142.483999]  tasklet_action_common.isra.0+0x42/0xa0
[11142.484014]  __do_softirq+0xd7/0x2cd
[11142.484028]  do_softirq_own_stack+0x2a/0x40
[11142.484046]  do_softirq.part.0+0x26/0x30
[11142.484071]  __local_bh_enable_ip+0x46/0x50
[11142.484299]  i915_gem_do_execbuffer+0x39c1/0x4e50 [i915]
[11142.484528]  i915_gem_execbuffer2_ioctl+0x2c3/0x580 [i915]
[11142.484546]  drm_ioctl_kernel+0xe4/0x120
[11142.484559]  drm_ioctl+0x297/0x4c7
[11142.484572]  ksys_ioctl+0x89/0xb0
[11142.484586]  __x64_sys_ioctl+0x42/0x60
[11142.484610]  do_syscall_64+0x6e/0x2c0
[11142.484627]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310141320.24149-1-chris@chris-wilson.co.uk

drm/i915: Tweak scheduler's kick_submission()

Skip useless priority bumping on adding a new dependency by making sure
that we do update the priority if we would have rescheduled the active
cotnext.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310115947.6482-1-chris@chris-wilson.co.uk

drm/i915: Defer semaphore priority bumping to a workqueue

Since the semaphore fence may be signaled from inside an interrupt
handler from inside a request holding its request->lock, we cannot then
enter into the engine->active.lock for processing the semaphore priority
bump as we may traverse our call tree and end up on another held
request.

CPU 0:
[ 2243.218864]  _raw_spin_lock_irqsave+0x9a/0xb0
[ 2243.218867]  i915_schedule_bump_priority+0x49/0x80 [i915]
[ 2243.218869]  semaphore_notify+0x6d/0x98 [i915]
[ 2243.218871]  __i915_sw_fence_complete+0x61/0x420 [i915]
[ 2243.218874]  ? kmem_cache_free+0x211/0x290
[ 2243.218876]  i915_sw_fence_complete+0x58/0x80 [i915]
[ 2243.218879]  dma_i915_sw_fence_wake+0x3e/0x80 [i915]
[ 2243.218881]  signal_irq_work+0x571/0x690 [i915]
[ 2243.218883]  irq_work_run_list+0xd7/0x120
[ 2243.218885]  irq_work_run+0x1d/0x50
[ 2243.218887]  smp_irq_work_interrupt+0x21/0x30
[ 2243.218889]  irq_work_interrupt+0xf/0x20

CPU 1:
[ 2242.173107]  _raw_spin_lock+0x8f/0xa0
[ 2242.173110]  __i915_request_submit+0x64/0x4a0 [i915]
[ 2242.173112]  __execlists_submission_tasklet+0x8ee/0x2120 [i915]
[ 2242.173114]  ? i915_sched_lookup_priolist+0x1e3/0x2b0 [i915]
[ 2242.173117]  execlists_submit_request+0x2e8/0x2f0 [i915]
[ 2242.173119]  submit_notify+0x8f/0xc0 [i915]
[ 2242.173121]  __i915_sw_fence_complete+0x61/0x420 [i915]
[ 2242.173124]  ? _raw_spin_unlock_irqrestore+0x39/0x40
[ 2242.173137]  i915_sw_fence_complete+0x58/0x80 [i915]
[ 2242.173140]  i915_sw_fence_commit+0x16/0x20 [i915]

Closes: https://gitlab.freedesktop.org/drm/intel/issues/1318
Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310101720.9944-1-chris@chris-wilson.co.uk

Merge tag 'gvt-next-2020-03-10' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-03-10

- Fix CFL dmabuf display after vfio edid enabling (Tina)
- Clean up scan non-priv batch debugfs entry (Chris)
- Use intel engines initialized in gvt, cleanup previous ring id (Chris)
- Use intel_gt instead (Chris)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310081928.GG28483@zhen-hp.sh.intel.com

Merge v5.6-rc5 into drm-next

Requested my mripard for some misc patches that need this as a base.

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/display: Do not write in removed FBC fence registers

Platforms without fences don't have FBC host tracking and those
registers are marked as reserved in those platforms.

v2: checking num_fences to write to FBC fence registers (Ville)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-2-jose.souza@intel.com

drm/i915/display: Deactive FBC in fastsets when disabled by parameter

Most of the kms_frontbuffer_tracking tests disables the feature being
tested, draw, get the CRC then enable the feature, draw again, get the
CRC and check if it matches.
Some times it is able to do that with a fastset, so
intel_pre_plane_update() is executed but intel_fbc_can_flip_nuke() was
not checking if FBC is now enabled in this CRTC leaving FBC active and
causing the warning bellow in __intel_fbc_disable()

[IGT] kms_frontbuffer_tracking: starting subtest fbc-1p-pri-indfb-multidraw
Setting dangerous option enable_fbc - tainting kernel
i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to f
i915 0000:00:02.0: [drm:intel_psr_debug_set [i915]] Invalid debug mask f
i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to 1
i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:215:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138120KHz
[drm:intel_dp_compute_config [i915]] Force DSC en = 0
[drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link rate required 414360 available 540000
i915 0000:00:02.0: [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:91:pipe A] enable: yes [fastset]
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
[drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 138120
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] linetime: 119, ips linetime: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x8b, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] MST master transcoder: <invalid>
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:262] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]]  rotation: 0x1, scaler: -1
i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]]  src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1
i915 0000:00:02.0: [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS
------------[ cut here ]------------
i915 0000:00:02.0: drm_WARN_ON(fbc->active)
WARNING: CPU: 4 PID: 1175 at drivers/gpu/drm/i915/display/intel_fbc.c:973 __intel_fbc_disable+0xa5/0x130 [i915]
Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core cdc_ether e1000e usbnet mii snd_pcm ptp mei_me pps_core mei thunderbolt intel_lpss_pci prime_numbers
CPU: 4 PID: 1175 Comm: kms_frontbuffer Tainted: G     U            5.5.0-CI-Trybot_5651+ #1
Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019
RIP: 0010:__intel_fbc_disable+0xa5/0x130 [i915]
Code: 8b 67 50 4d 85 e4 0f 84 8f 00 00 00 e8 44 33 30 e1 48 c7 c1 72 f6 4c a0 4c 89 e2 48 89 c6 48 c7 c7 42 f6 4c a0 e8 0b 9d ce e0 <0f> 0b eb 90 48 8b 7b 18 4c 8b 67 50 4d 85 e4 74 6d e8 15 33 30 e1
RSP: 0018:ffffc90000613b68 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8884799d0000 RCX: 0000000000000006
RDX: 0000000000001905 RSI: ffff888495dac970 RDI: ffffffff823731a1
RBP: ffff88847c05d000 R08: ffff888495dac970 R09: 0000000000000000
R10: ffffc90000613b88 R11: 0000000000000000 R12: ffff88849bba7e40
R13: ffff8884799d0000 R14: ffff888498564000 R15: 0000000000000000
FS:  00007f8157f08300(0000) GS:ffff8884a0000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfea2eb8 CR3: 000000049d1cc001 CR4: 0000000000760ee0
PKRU: 55555554
Call Trace:
 intel_fbc_disable+0x4a/0x50 [i915]
 intel_update_crtc+0x12c/0x1d0 [i915]
 skl_commit_modeset_enables+0x14d/0x600 [i915]
 intel_atomic_commit_tail+0x30d/0x1480 [i915]
 ? queue_work_on+0x31/0x70
 ? intel_atomic_commit_ready+0x3f/0x48 [i915]
 ? __i915_sw_fence_complete+0x1a0/0x250 [i915]
 intel_atomic_commit+0x312/0x390 [i915]
 intel_psr_fastset_force+0x119/0x150 [i915]
 i915_edp_psr_debug_set+0x53/0x70 [i915]
 simple_attr_write+0xb0/0xd0
 full_proxy_write+0x51/0x80
 vfs_write+0xb9/0x1d0
 ksys_write+0x9f/0xe0
 do_syscall_64+0x4f/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8157240281
Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53
RSP: 002b:00007ffdbfea59d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8157240281
RDX: 0000000000000003 RSI: 00007f8157901152 RDI: 0000000000000008
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8157901152
R13: 0000000000000008 R14: 00005589d298dce0 R15: 0000000000000000
irq event stamp: 55208
hardirqs last  enabled at (55207): [<ffffffff8112f3fc>] vprintk_emit+0xcc/0x330
hardirqs last disabled at (55208): [<ffffffff81001ca0>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last  enabled at (54926): [<ffffffff81e00385>] __do_softirq+0x385/0x47f
softirqs last disabled at (54915): [<ffffffff810ba15a>] irq_exit+0xba/0xc0
---[ end trace afa50c52e5a512bb ]---
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:215:eDP-1]
i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [CRTC:91:pipe A]
[drm:intel_ddi_get_config [i915]] [ENCODER:214:DDI A] Fec status: 0
i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.150 [i915]] DPLL 0

v2:
using intel_fbc_can_enable() instead of crtc_state->enable_fbc (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-1-jose.souza@intel.com

drm/i915/mst: Hookup DRM DP MST late_register/early_unregister callbacks

i915 can enable aux device nodes for DP MST by calling
drm_dp_mst_connector_late_register()/
drm_dp_mst_connector_early_unregister(),
so let's hook that up.

Changes since v1:
* Call intel_connector_register/unregister() from
  intel_dp_mst_connector_late_register/unregister() so we don't lose
  error injection - Ville Syrjälä
Changes since v2:
* Don't forget to clean up if intel_connector_register() fails - Ville

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310195122.1590925-1-lyude@redhat.com

drm/amdgpu/runpm: disable runpm on Vega10

Some framework test will fail if enable runpm on Vega10.
Disable it untill issue fixed.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Kyle Chen <Kyle.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: call ras_debugfs_create_all in debugfs_init

and remove each ras IP's own debugfs creation

this is required to fix ras when the driver does not use the drm load
and unload callbacks due to ordering issues with the drm device node.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add function to creat all ras debugfs node

centralize all debugfs creation in one place for ras

this is required to fix ras when the driver does not use the drm load
and unload callbacks due to ordering issues with the drm device node.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix the coverity warning about negative check for an unsigned value

There will be a coverity warning because min and max are both unsigned.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct the condition of warning while bo release

Only kernel bo has kfd eviction fence.
This warning is to give a notice that kfd only remove eviction fence on
individual bos.

Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Consolidate duplicated bo alloc flags

ALLOC_MEM_FLAGS_* used are the same as the KFD_IOC_ALLOC_MEM_FLAGS_*,
but they are interweavedly used in kernel driver, resulting in bad
readability. For example, KFD_IOC_ALLOC_MEM_FLAGS_COHERENT is not
referenced in kernel, and it functions implicitly in kernel through
ALLOC_MEM_FLAGS_COHERENT, causing unnecessary confusion.

Replace all occurrences of ALLOC_MEM_FLAGS_* with
KFD_IOC_ALLOC_MEM_FLAGS_* to solve the problem.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use pr_debug to print the message of reaching event limit

People are inclined to think of the previous pr_warn message as an
error, so use pre_debug instead.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do not set nil entry in compute_prio_sched

If there are no high priority compute queues available then set normal
priority sched array to compute_prio_sched[AMDGPU_GFX_PIPE_PRIO_HIGH]

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dt-bindings: display: Add idk-2121wr binding

Add binding for the idk-2121wr LVDS panel from Advantech.

Some panel-specific documentation can be found here:
https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583869169-1006-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com

drm/dp_mst: Fix drm_dp_check_mstb_guid() return code

We actually expect this to return a 0 on success, or negative error code
on failure. In order to do that, we check whether or not we managed to
write the whole GUID and then return 0 if so, otherwise return a
negative error code. Also, let's add an error message here so it's a
little more obvious when this fails in the middle of a link address
probe.

This should fix issues with certain MST hubs seemingly stopping for no
reason in the middle of the link address probe process.

Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings")
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234923.547873-3-lyude@redhat.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/dp_mst: Make drm_dp_mst_dpcd_write() consistent with drm_dp_dpcd_write()

Noticed this while having some problems with hubs sometimes not being
detected on the first plug. Every single dpcd read or write function
returns the number of bytes transferred on success or a negative error
code, except apparently for drm_dp_mst_dpcd_write() - which returns 0 on
success.

There's not really any good reason for this difference that I can tell,
and having the two functions give differing behavior means that
drm_dp_dpcd_write() will end up returning 0 on success for MST devices,
but the number of bytes transferred for everything else.

So, fix that and update the kernel doc.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 2f221a5efed4 ("drm/dp_mst: Add MST support to DP DPCD R/W functions")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306234923.547873-2-lyude@redhat.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/panel-simple: Fix dotclock for Ortustech COM37H3M

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

There are two variants of the COM37H3M panel.
The older one's COM37H3M05DTC data sheet specifies:

                         MIN      TYP     MAX
CLK frequency    fCLK     --       22.4    26.3 MHz (in VGA mode)
VSYNC Frequency  fVSYNC   54       60      66   Hz
VSYNC cycle time tv       --      650      --   H
HSYNC frequency  fHSYNC   --       39.3    --   kHz
HSYNC cycle time th       --      570      --   CLK

The newer one's COM37H3M99DTC data sheet says:

                         MIN      TYP     MAX
CLK frequency    fCLK     18       19.8    27   MHz
VSYNC Frequency  fVSYNC   54       60      66   Hz
VSYNC cycle time tv      646      650     700   H
HSYNC frequency  fHSYNC  --        39.0    50.0 kHz
HSYNC cycle time th      504      508     630   CLK

So we choose a parameter set that lies within the specs
of both variants. We start at .vrefresh = 60,
choose .htotal = 570 and .vtotal = 650 and end up
in a clock of 22.230 MHz.

Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com

drm: panel: Set connector type for OrtusTech COM43H4M85ULC panel

The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309184210.10042-1-laurent.pinchart@ideasonboard.com

drm/i915: Improve the start alignment of bonded pairs

Always wait on the start of the signaler request to reduce the problem
of dequeueing the bonded pair too early -- we want both payloads to
start at the same time, with no latency, and yet still allow others to
make full use of the slack in the system. This reduce the amount of time
we spend waiting on the semaphore used to synchronise the start of the
bonded payload.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200306133852.3420322-3-chris@chris-wilson.co.uk

drm/mm: Remove redundant assignment in drm_mm_reserve_node

In Pete Goodliffe words, "You can improve a system by adding new code. You
can also improve a system by removing code" - In this case, commit
"202b52b7fbf70" added new code to initialize end of the node. So, there
is no need for duplicated initialization, and this patch simply removes it.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200309151156.25040-1-akeem.g.abodunrin@intel.com

drm/meson: Add YUV420 output support

This patch adds support for the YUV420 output from the Amlogic Meson SoCs
Video Processing Unit to the HDMI Controller.

The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.
In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.

This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ratio with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.

This patch enables the bridge bus format negociation, and handles
the YUV420 case if selected by the negociation.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-12-narmstrong@baylibre.com

drm/meson: vclk: add support for YUV420 setup

This patch adds clocking support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.

The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.

This mode needs a different clock generation scheme since the TMDS PHY
clock must match the 10x ratio with the YUV420 pixel clock, but
the video encoder must run at 2x the pixel clock.

This patch adds the TMDS PHY clock value in all the video clock setup
in order to better support these specific uses cases and switch
to the Common Clock framework for clocks handling in the future.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-11-narmstrong@baylibre.com

drm/meson: venc: add support for YUV420 setup

This patch adds encoding support for the YUV420 output from the
Amlogic Meson SoCs Video Processing Unit to the HDMI Controller.

The YUV420 is obtained by generating a YUV444 pixel stream like
the classic HDMI display modes, but then the Video Encoder output
can be configured to down-sample the YUV444 pixel stream to a YUV420
stream.

In addition if pixel stream down-sampling, the Y Cb Cr components must
also be mapped differently to align with the HDMI2.0 specifications.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-10-narmstrong@baylibre.com