mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled

commit 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads
to build failure[1] with COMPILE_TEST and RPCIF_HYPERBUS enabled. This
is because driver needs functions RENESAS_RPCIF which is only buildable
for CONFIG_ARCH_RENESAS.

Fix this by dropping COMPILE_TEST from RPCIF_HYPERBUS Kconfig entry.
This ensures driver can be built only when RENESAS_RPCIF is also
selected.

[1]:
rpc-if.c:(.text+0x20): undefined reference to `rpcif_disable_rpm' ld:
drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_prepare_read':
rpc-if.c:(.text+0xd6): undefined reference to `rpcif_prepare' ld:
drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_read16':
[...]

Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Merge tag 'cfi/for-5.10' of gitolite.pub/scm/linux/kernel/git/mtd/linux into mtd/next

HyperBus changes

* DMA support for TI's AM654 HyperBus controller driver.
* HyperBus frontend driver for Renesas RPC-IF driver.

Merge tag 'spi-nor/for-5.10' of git://git./linux/kernel/git/mtd/linux into mtd/next

SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d

SPI NOR controller drivers changes:
- intel-spi:
   - Add Alder Lake-S PCI ID

Merge tag 'nand/for-5.10' of git://git./linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
* Use the new generic ECC object
* Create helpers to set/extract the ECC requirements
* Create a helper to extract the ECC configuration
* Add a NAND page I/O request type
* Introduce the ECC engine framework

Raw NAND core changes:
* Don't overwrite the error code from nand_set_ecc_soft_ops()
* Introduce nand_set_ecc_on_host_ops()
* Use the NAND framework user_conf object for ECC flags
* Use the ECC framework user input parsing bits
* Use the ECC framework nand_ecc_is_strong_enough() helper
* Use the ECC framework OOB layouts
* Make use of the ECC framework
* Use nanddev_get/set_ecc_requirements() when relevant
* Use the new ECC engine type enumeration
* Separate the ECC engine type and the ECC byte placement
* Move the nand_ecc_algo enum to the generic NAND layer
* Rename the ECC algorithm enumeration items
* Add a kernel doc to the ECC algorithm enumeration
* DT bindings:
  - Document boolean NAND ECC properties
  - Document nand-ecc-engine
  - Document nand-ecc-placement

Raw NAND drivers changes:
* Ams-Delta: Fix non-OF build warning
* Atmel:
  - Check return values for nand_read_data_op
  - Simplify with dev_err_probe()
  - Get rid of the legacy interface implementation
  - Convert the driver to exec_op()
  - Use nand_prog_page_end_op()
  - Use nand_{write,read}_data_op()
  - Drop redundant nand_read_page_op()
  - Enable the NFC controller at probe time
  - Disable clk on error handling path in probe
* Cadence: remove a redundant dev_err call
* Gpmi:
  - Simplify with dev_err_probe()
* Marvell:
  - Fix and update kerneldoc
  - Simplify with dev_err_probe()
  - Fix and update kerneldoc
  - Simplify with dev_err_probe()
  - Support panic_write for mtdoops
* Onenand:
  - Simplify the return expression of onenand_transfer_auto_oob
  - Simplify with dev_err_probe()
* Oxnas: cleanup/simplify code
* Pasemi: Make pasemi_device_ready() static
* Qcom: Simplify with dev_err_probe()
* Stm32_fmc2: fix a buffer overflow
* Vf610: Remove unused function vf610_nfc_transfer_size()

SPI-NAND changes:
* Use nanddev_get_ecc_conf() when relevant
* Gigadevice:
  - Add support for GD5F4GQ4xC
  - Add QE Bit
  - Use only one dummy byte in QUADIO
* Macronix:
  - Add support for MX31UF1GE4BC
  - Add support for MX31LF1GE4BC

mtd: hyperbus: add Renesas RPC-IF driver

Add the HyperFLash driver for the Renesas RPC-IF.  It's the "front end"
driver using the "back end" APIs in the main driver to talk to the real
hardware.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/78abb851-2beb-fe7d-87e5-ce58ee877d35@gmail.com

Revert "mtd: spi-nor: Prefer asynchronous probe"

This reverts commit 03edda0e1edaa3c2e99239c66e3c14d749318fd6.

This leads to warn dump like [1] on some platforms and reorders MTD
devices which may break user space expectations [2]. So revert the change.

[1]:

[    1.849801] ------------[ cut here ]------------
[    1.854271] mscc_felix 0000:00:00.5: device is disabled, skipping
[    1.858753] WARNING: CPU: 1 PID: 7 at kernel/kmod.c:136 __request_module+0x3a4/0x568

[...]

[2] Bug report: https://lore.kernel.org/linux-mtd/20201003150633.23416-1-michael@walle.cc/

Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201005090321.8724-1-vigneshr@ti.com

mtd: parsers: bcm63xx: Do not make it modular

With commit 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE
detection"), we generate a reference to fw_arg3 which is the fourth
firmware/command line argument on MIPS platforms. That symbol is not
exported and would cause a linking failure.

The parser is typically necessary to boot a BCM63xx-based system anyway
so having it be part of the kernel image makes sense, therefore make it
'bool' instead of 'tristate'.

Fixes: 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200929172726.30469-1-f.fainelli@gmail.com

mtd: spear_smi: Enable compile testing

This driver does not contain any architecture specific code, enable
compile testing it.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200928155715.14370-1-miquel.raynal@bootlin.com

mtd: maps: vmu-flash: fix typos for struct memcard

Change struct memcard`s element "removeable" -> "removable".

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200922112814.26761-1-bernard@vivo.com

mtd: physmap: Add Baikal-T1 physically mapped ROM support

Baikal-T1 Boot Controller provides an access to a RO storages, which are
physically mapped into the SoC MMIO space. In particularly there are
Internal ROM embedded into the SoC with a pre-installed firmware,
externally attached SPI flash (also accessed in the read-only mode) and a
memory region, which mirrors one of them in accordance with the currently
enabled system boot mode (also called Boot ROM).

This commit adds the Internal ROM support to the physmap driver of the MTD
kernel subsystem. The driver will create the Internal ROM MTD as long as
it is defined in the system dts file. The physically mapped SPI flash
region will be used to implement the SPI-mem interface. The mirroring
memory region won't be accessible directly since it's redundant due to
both bootable regions being exposed anyway.

Note we had to create a dedicated code for the ROMs since read from the
corresponding memory regions must be done via the dword-aligned addresses.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru

mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200919100854.1639267-1-liushixin2@huawei.com

mtd: onenand: simplify the return expression of onenand_transfer_auto_oob

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200921082441.2591669-1-liushixin2@huawei.com

mtd: rawnand: cadence: remove a redundant dev_err call

There is an error message within devm_ioremap_resource already, so
remove the dev_err call to avoid a redundant error message.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200921013805.1724606-1-liushixin2@huawei.com

mtd: rawnand: ams-delta: Fix non-OF build warning

Commit 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device
tables") introduced an OF module device table but wrapped a reference
to it with of_match_ptr() which resolves to NULL in non-OF configs.
That resulted in a clang compiler warning on unused variable in non-OF
builds.  Fix it.

drivers/mtd/nand/raw/ams-delta.c:373:34: warning: unused variable 'gpio_nand_of_id_table' [-Wunused-const-variable]
   static const struct of_device_id gpio_nand_of_id_table[] = {
                                    ^
   1 warning generated.

Fixes: 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200919080403.17520-1-jmkrzyszt@gmail.com

mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()

The error code received from nand_set_ecc_soft_ops() was overwritten,
drop this redundant assignment and use the error code received from
the callee.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-4-tudor.ambarus@microchip.com

mtd: rawnand: Introduce nand_set_ecc_on_host_ops()

There were too many levels of indentation and the code was
hard to read. Introduce a new function, similar to
nand_set_ecc_soft_ops().

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-3-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Check return values for nand_read_data_op

In atmel_nand_pmecc_read_pg(), nand_read_data_op() is called twice
without the return values being checked for errors. Add these checks.

Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200914214245.14626-1-alex.dewar90@gmail.com

mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()

commit ecc40b8df59a ("mtd: rawnand: vf610_nfc: remove old hooks")
left behind this, remove it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200909134318.36340-1-yuehaibing@huawei.com

mtd: rawnand: qcom: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-6-krzk@kernel.org

mtd: rawnand: marvell: Fix and update kerneldoc

Fix kerneldoc comments and add missing documentation for members to fix
W=1 compile warnings like:

  drivers/mtd/nand/raw/marvell_nand.c:251: warning:
    cannot understand function prototype: 'struct marvell_hw_ecc_layout '

  drivers/mtd/nand/raw/marvell_nand.c:342: warning:
    Function parameter or member 'layout' not described in 'marvell_nand_chip'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-5-krzk@kernel.org

mtd: rawnand: marvell: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-4-krzk@kernel.org

mtd: rawnand: gpmi: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-3-krzk@kernel.org

mtd: rawnand: atmel: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-2-krzk@kernel.org

mtd: onenand: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-1-krzk@kernel.org

mtd: rawnand: marvell: Support panic_write for mtdoops

Under a panic context we can't get an interrupt. Actively poll for the
RB status when performing a panic_write.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200828011237.22066-1-chris.packham@alliedtelesis.co.nz

mtd: spinand: gigadevice: Add support for GD5F4GQ4xC

This adds support for the following 4GiB chips:
GD5F4GQ4RCYIG 1.8V
GD5F4GQ4UCYIG 3.3V

The datasheet can be found here:
https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf

The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination
Technologies Creator Ci40 (Marduk), the 1.8V version was not tested.

This device only works in single SPI mode and not in dual or quad mode
for me on this board.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-4-hauke@hauke-m.de

mtd: spinand: gigadevice: Add QE Bit

The following GigaDevice chips have the QE BIT in the feature flags, I
checked the datasheets, but did not try this.
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

The Quad operations like 0xEB mention that the QE bit has to be set.

Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-3-hauke@hauke-m.de

mtd: spinand: gigadevice: Only one dummy byte in QUADIO

The datasheet only lists one dummy byte in the 0xEH operation for the
following chips:
* GD5F1GQ4xExxG
* GD5F1GQ4xFxxG
* GD5F1GQ4UAYIG
* GD5F4GQ4UAYIG

Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de

mtd: rawnand: vf610: disable clk on error handling path in probe

vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error
handling path. The patch fixes that.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru

mtd: rawnand: oxnas: cleanup/simplify code

Simplify oxnas_nand_probe.

Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200724083825.GA31437@amd

mtd: spinand: macronix: Add support for MX31UF1GE4BC

The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial
NAND flash device.

Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).

Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595404978-31079-3-git-send-email-ycllin@mxic.com.tw

mtd: spinand: macronix: Add support for MX31LF1GE4BC

The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial
NAND flash device.

Validated by read, erase, read back, write and read back
on Xilinx Zynq PicoZed FPGA board which included
Macronix SPI Host (driver/spi/spi-mxic.c).

Signed-off-by: YouChing Lin <ycllin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595404978-31079-2-git-send-email-ycllin@mxic.com.tw

mtd: rawnand: pasemi: Make pasemi_device_ready() static

The sparse tool complains as follows:

drivers/mtd/nand/raw/pasemi_nand.c:71:5: warning:
 symbol 'pasemi_device_ready' was not declared. Should it be static?

This function is not used outside of pasemi_nand.c, so this commit
marks it static.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200721151657.41027-1-weiyongjun1@huawei.com

mtd: rawnand: stm32_fmc2: fix a buffer overflow

This patch solves following static checker warning:
drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip()
error: buffer overflow 'nfc->data_phys_addr' 2 <= 2

The CS value can only be 0 or 1.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com

mtd: rawnand: atmel: Get rid of the legacy interface implementation

Now that exec_op() is implemented, we can get rid of all the legacy
hooks.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-7-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Convert the driver to exec_op()

Both SMC and HSMC are converted to exec_op().

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-6-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Use nand_prog_page_end_op()

The nand_prog_page_end_op() sequence is open-coded in
atmel_hsmc_nand_pmecc_write_pg(). Let's use the generic helper here.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-5-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Use nand_{write,read}_data_op()

Use the nand_{write,read}_data_op() helpers instead of calling the
atmel_nand_{read,write}_buf() functions directly. This will ease the
transition to exec_op().

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-4-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Drop redundant nand_read_page_op()

The legacy page read path in atmel_hsmc_nand_pmecc_read_pg() issues
a nand_read_page_op() that's already issued by
atmel_nand_pmecc_read_pg(). Let's get rid of the unneeded one.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-3-tudor.ambarus@microchip.com

mtd: rawnand: atmel: Enable the NFC controller at probe time

No need to enable it everytime select_chip() is called. If we really
care about PM, we should implement runtime PM hooks and disable the
controller and all its clocks when the controller has been unused for
some time.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-2-tudor.ambarus@microchip.com

mtd: rawnand: Use the NAND framework user_conf object for ECC flags

Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.

There is currently only one to save: NAND_ECC_MAXIMIZE.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-21-miquel.raynal@bootlin.com

mtd: rawnand: Use the ECC framework user input parsing bits

Many helpers are generic to all NAND chips, they should not be
raw-NAND specific, so use the generic ones.

To avoid moving all the raw NAND core "history" into the generic NAND
layer, we keep a part of this parsing in the raw NAND core to ensure
backward compatibility.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-20-miquel.raynal@bootlin.com

mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper

Plus, the new helper has a more "english" name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-19-miquel.raynal@bootlin.com

mtd: rawnand: Use the ECC framework OOB layouts

No need to have our own in the raw NAND core.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-18-miquel.raynal@bootlin.com

mtd: hyperbus: hbmc-am654: Add DMA support for reads

AM654 HyperBus controller provides MMIO interface to read data from
flash. So add DMA memcpy support for reading data over MMIO interface.
This provides 5x improvement in throughput and reduces CPU usage as
well.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200924081214.16934-5-vigneshr@ti.com

mtd: hyperbus: hbmc-am654: Drop pm_runtime* calls from probe

Recent genpd changes for K3 platform ensure device is ON before driver
probe is called. Therefore, drop redundant pm_runtime_* calls from
driver to simplify the code.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200924081214.16934-4-vigneshr@ti.com

mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access

Setting up of direct mapping should be done with flash node's IO
address space and not with controller's IO region.

Fixes: b6fe8bc67d2d3 ("mtd: hyperbus: move direct mapping setup to AM654 HBMC driver")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200924081214.16934-3-vigneshr@ti.com

mtd: hyperbus: Provide per device private pointer

Provide per device private pointer that can be used by controller
drivers to store device specific private data.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200924081214.16934-2-vigneshr@ti.com

mtd: spi-nor: winbond: Add support for w25q64jwm

Add support Winbond w25q{64,128,256}jwm which are identical to existing
w25q32jwm except for their sizes.

This was tested with w25q64jwm, basic erase/write/readback and
lock/unlock both lower/upper blocks were okay.

Signed-off-by: ikjn@chromium.org <ikjn@chromium.org>
Signed-off-by: Xingyu Wu <wuxy@bitland.corp-partner.google.com>
Signed-off-by: ST Lin <stlin2@winbond.com>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200928060631.2090541-1-ikjn@chromium.org

mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-S SPI serial flash

Intel Alder Lake-S has the same SPI serial flash controller as Cannon
Lake. Add Alder Lake-S PCI ID to the driver list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200925095109.51148-1-mika.westerberg@linux.intel.com

mtd: spi-nor: macronix: Add SECT_4K to mx25l12805d

According to the mx25l12805d datasheet it supports using 4K or 64K sectors.
So lets add the SECT_4K to enable 4K sector usage.

Datasheet: https://www.mxic.com.tw/Lists/Datasheet/Attachments/7321/MX25L12805D,%203V,%20128Mb,%20v1.2.pdf

Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200915100623.708736-1-robert.marko@sartura.hr

mtd: spi-nor: Prefer asynchronous probe

On my system the spi_nor_probe() took ~6 ms at bootup.  That's not a
lot, but every little bit adds up to a slow bootup.  While we can get
this out of the boot path by making it a module, there are times where
it is convenient (or even required) for this to be builtin the kernel.
Let's set that we prefer async probe so that we don't block other
drivers from probing while we are probing.

This is a tiny little change that is almost guaranteed to be safe for
anything that is able to run as a module, which SPI_NOR is.
Specifically modules are already probed asynchronously.  Also: since
other things in the system may have enabled asynchronous probe the
system may already be doing other things during our probe.

There is a small possibility that some other driver that was a client
of SPI_NOR didn't handle -EPROBE_DEFER and was relying on probe
ordering and only worked when the SPI_NOR and the SPI bus were
builtin.  In that case the other driver has a bug that's waiting to
hit and the other driver should be fixed.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200902160002.1.I658d1c0db9adfeb9a59bc55e96a19e192c959e55@changeid

mtd: rawnand: Make use of the ECC framework

Just enable the ECC framework with raw NAND so that we can drop, one
by one, all the unnecessary/redundant definitions.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-17-miquel.raynal@bootlin.com

mtd: nand: Use the new generic ECC object

Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-16-miquel.raynal@bootlin.com

mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant

Instead of accessing ->strength/step_size directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com

mtd: nand: Create helpers to set/extract the ECC requirements

Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.

Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-14-miquel.raynal@bootlin.com

mtd: spinand: Use nanddev_get_ecc_conf() when relevant

Instead of accessing ->strength/step_size directly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-13-miquel.raynal@bootlin.com

mtd: nand: Create a helper to extract the ECC configuration

Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.

Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-12-miquel.raynal@bootlin.com

mtd: rawnand: Use the new ECC engine type enumeration

Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.

The device tree parsing is also updated to return the new enumeration
from the old strings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com

mtd: rawnand: Separate the ECC engine type and the ECC byte placement

The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.

Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com

Linux 5.9-rc6

Merge tag 'core_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull syscall tracing fix from Borislav Petkov:
 "Fix the seccomp syscall rewriting so that trace and audit see the
  rewritten syscall number, from Kees Cook"

* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  core/entry: Report syscall correctly for trace and audit

Merge tag 'objtool_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:
 "Fix noreturn detection for ignored sibling functions (Josh Poimboeuf)"

* tag 'objtool_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix noreturn detection for ignored functions

Merge tag 'locking_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:
 "Two fixes from the locking/urgent pile:

   - Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
     Zijlstra)

   - Make percpu-rwsem operations on the semaphore's ->read_count
     IRQ-safe because it can be used in an IRQ context (Hou Tao)"

* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
  locking/lockdep: Fix "USED" <- "IN-NMI" inversions

Merge tag 'efi-urgent-for-v5.9-rc5' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Borislav Petkov:
 "Ensure that the EFI bootloader control module only probes successfully
  on systems that support the EFI SetVariable runtime service"

[ Tag and commit from Ard Biesheuvel, forwarded by Borislav ]

* tag 'efi-urgent-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: efibc: check for efivars write capability

Merge tag 'x86_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - A defconfig fix (Daniel Díaz)

 - Disable relocation relaxation for the compressed kernel when not
   built as -pie as in that case kernels built with clang and linked
   with LLD fail to boot due to the linker optimizing some instructions
   in non-PIE form; the gory details in the commit message (Arvind
   Sankar)

 - A fix for the "bad bp value" warning issued by the frame-pointer
   unwinder (Josh Poimboeuf)

* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/fp: Fix FP unwinding in ret_from_fork
  x86/boot/compressed: Disable relocation relaxation
  x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig

Merge tag 'libnvdimm-fixes-5.9-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A handful of fixes to address a string of mistakes in the mechanism
  for device-mapper to determine if its component devices are dax
  capable.

   - Fix an original bug in device-mapper table reference counting when
     interrogating dax capability in the component device. This bug was
     hidden by the following bug.

   - Fix device-mapper to use the proper helper (dax_supported() instead
     of the leaf helper generic_fsdax_supported()) to determine dax
     operation of a stacked block device configuration. The original
     implementation is only valid for one level of dax-capable block
     device stacking. This bug was discovered while fixing the below
     regression.

   - Fix an infinite recursion regression introduced by broken attempts
     to quiet the generic_fsdax_supported() path and make it bail out
     before logging "dax capability not found" errors"

* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix stack overflow when mounting fsdax pmem device
  dm: Call proper helper to determine dax support
  dm/dax: Fix table reference counts

Merge tag 'riscv-for-linus-5.9-rc6' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for a lockdep issue to avoid an asserting triggering during
   early boot. There shouldn't be any incorrect behavior as the system
   isn't concurrent at the time.

 - The addition of a missing fence when installing early fixmap
   mappings.

 - A corretion to the K210 device tree's interrupt map.

 - A fix for M-mode timer handling on the K210.

* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Resurrect the MMIO timer implementation for M-mode systems
  riscv: Fix Kendryte K210 device tree
  riscv: Add sfence.vma after early page table changes
  RISC-V: Take text_mutex in ftrace_init_nop()

Merge tag 'usb-5.9-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and one Thunderbolt driver fixes.

  Nothing major at all, just some fixes for reported issues, and a quirk
  addition:

   - typec fixes

   - UAS disconnect fix

   - usblp race fix

   - ehci-hcd modversions build fix

   - ignore wakeup quirk table addition

   - thunderbolt DROM read fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usblp: fix race between disconnect() and read()
  ehci-hcd: Move include to keep CRC stable
  usb: typec: intel_pmc_mux: Handle SCU IPC error conditions
  USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
  USB: UAS: fix disconnect by unplugging a hub
  usb: typec: ucsi: Prevent mode overrun
  usb: typec: ucsi: acpi: Increase command completion timeout value
  thunderbolt: Retry DROM read once if parsing fails

Merge tag 'tty-5.9-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial/fbcon fixes from Greg KH:
 "Here are some small tty/serial and one more fbcon fix.

  They include:

   - serial core locking regression fixes

   - new device ids for 8250_pci driver

   - fbcon fix for syzbot found issue

  All have been in linux-next with no reported issues"

* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fbcon: Fix user font detection test at fbcon_resize().
  serial: 8250_pci: Add Realtek 816a and 816b
  serial: core: fix console port-lock regression
  serial: core: fix port-lock initialisation

Merge tag 'edac_urgent_for_v5.9_rc6' of git://git./linux/kernel/git/ras/ras

Pull EDAC fixes from Borislav Petkov:
 "Two fixes for resulting from CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
  experiments:

   - complete a previous fix to reset a local structure containing
     scanned system data properly so that the driver rescans, as it
     should, on a second load.

   - address a refcount underflow due to not paying attention to the
     driver whitelest on unregister"

* tag 'edac_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ghes: Check whether the driver is on the safe list correctly
  EDAC/ghes: Clear scanned data on unload

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "Just a couple of driver quirks"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: trackpoint - add new trackpoint variant IDs
  Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

mm: fix wake_page_function() comment typos

Sedat Dilek pointed out some silly comment typo issues.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kbuild-fixes-v5.9-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
 "Fix qconf warnings and revive help message"

* tag 'kbuild-fixes-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: revive help message in the info view
  kconfig: qconf: fix incomplete type 'struct gstr' warning
  kconfig: qconf: use delete[] instead of delete to free array (again)

dax: Fix stack overflow when mounting fsdax pmem device

When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix
detection of dax support for non-persistent memory block devices")
introduces the stack overflow [1][2]. Here is the call path for
mounting ext4 file system:
  ext4_fill_super
    bdev_dax_supported
      __bdev_dax_supported
        dax_supported
          generic_fsdax_supported
            __generic_fsdax_supported
              bdev_dax_supported

The call path leads to the infinite calling loop, so we cannot
call bdev_dax_supported() in __generic_fsdax_supported(). The sanity
checking of the variable 'dax_dev' is moved prior to the two
bdev_dax_pgoff() checks [3][4].

[1] https://lore.kernel.org/linux-nvdimm/1420999447.1004543.1600055488770.JavaMail.zimbra@redhat.com/
[2] https://lore.kernel.org/linux-nvdimm/alpine.LRH.2.02.2009141131220.30651@file01.intranet.prod.int.rdu2.redhat.com/
[3] https://lore.kernel.org/linux-nvdimm/CA+RJvhxBHriCuJhm-D8NvJRe3h2MLM+ZMFgjeJjrRPerMRLvdg@mail.gmail.com/
[4] https://lore.kernel.org/linux-nvdimm/20200903160608.GU878166@iweiny-DESK2.sc.intel.com/

Fixes: 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: Coly Li <colyli@suse.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: John Pittman <jpittman@redhat.com>
Link: https://lore.kernel.org/r/20200917111549.6367-1-adrianhuang0701@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm: Call proper helper to determine dax support

DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:

dm-3: error: dax access failed (-95)

when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.

Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

dm/dax: Fix table reference counts

A recent fix to the dm_dax_supported() flow uncovered a latent bug. When
dm_get_live_table() fails it is still required to drop the
srcu_read_lock(). Without this change the lvm2 test-suite triggers this
warning:

    # lvm2-testsuite --only pvmove-abort-all.sh

    WARNING: lock held when returning to user space!
    5.9.0-rc5+ #251 Tainted: G           OE
    ------------------------------------------------
    lvm/1318 is leaving the kernel with locks still held!
    1 lock held by lvm/1318:
     #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod]

...and later on this hang signature:

    INFO: task lvm:1344 blocked for more than 122 seconds.
          Tainted: G           OE     5.9.0-rc5+ #251
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    task:lvm             state:D stack:    0 pid: 1344 ppid:     1 flags:0x00004000
    Call Trace:
     __schedule+0x45f/0xa80
     ? finish_task_switch+0x249/0x2c0
     ? wait_for_completion+0x86/0x110
     schedule+0x5f/0xd0
     schedule_timeout+0x212/0x2a0
     ? __schedule+0x467/0xa80
     ? wait_for_completion+0x86/0x110
     wait_for_completion+0xb0/0x110
     __synchronize_srcu+0xd1/0x160
     ? __bpf_trace_rcu_utilization+0x10/0x10
     __dm_suspend+0x6d/0x210 [dm_mod]
     dm_suspend+0xf6/0x140 [dm_mod]

Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

kconfig: qconf: revive help message in the info view

Since commit 68fd110b3e7e ("kconfig: qconf: remove redundant help in
the info view"), the help message is no longer displayed.

I intended to drop duplicated "Symbol:", "Type:", but precious info
about help and reverse dependencies was lost too.

Revive it now.

"defined at" is contained in menu_get_ext_help(), so I made sure
to not display it twice.

Fixes: 68fd110b3e7e ("kconfig: qconf: remove redundant help in the info view")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

kconfig: qconf: fix incomplete type 'struct gstr' warning

"make HOSTCXX=clang++ xconfig" reports the following:

  HOSTCXX scripts/kconfig/qconf.o
In file included from scripts/kconfig/qconf.cc:23:
In file included from scripts/kconfig/lkc.h:15:
scripts/kconfig/lkc_proto.h:26:13: warning: 'get_relations_str' has C-linkage specified, but returns incomplete type 'struct gstr' which could be incompatible with C [-Wreturn-type-c-linkage]
struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head);
            ^

Currently, get_relations_str() is declared before the struct gstr
definition.

Move all declarations of menu.c functions below.

BTW, some are declared in lkc.h and some in lkc_proto.h, but the
difference is unclear. I guess some refactoring is needed.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Boris Kolpackov <boris@codesynthesis.com>

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "15 patches.

  Subsystems affected by this patch series: mailmap, mm/hotfixes,
  mm/thp, mm/memory-hotplug, misc, kcsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'
  fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
  stackleak: let stack_erasing_sysctl take a kernel pointer buffer
  ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
  mm/memory_hotplug: drain per-cpu pages again during memory offline
  selftests/vm: fix display of page size in map_hugetlb
  mm/thp: fix __split_huge_pmd_locked() for migration PMD
  kprobes: fix kill kprobe which has been marked as gone
  tmpfs: restore functionality of nr_inodes=0
  mlock: fix unevictable_pgs event counts on THP
  mm: fix check_move_unevictable_pages() on THP
  mm: migration of hugetlbfs page skip memcg
  ksm: reinstate memcg charge on copied pages
  mailmap: add older email addresses for Kees Cook

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Another bunch of fixes for I2C.

  Jean's i801 patch is a cleanup on top of Volker's i801 patch, but it
  will make dependency handling much easier if those two go together"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK
  i2c: mediatek: Send i2c master code at more than 1MHz
  i2c: mediatek: Fix generic definitions for bus frequency
  i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()
  i2c: i801: Simplify the suspend callback
  i2c: i801: Fix resume bug
  i2c: aspeed: Mask IRQ status to relevant bits

RISC-V: Resurrect the MMIO timer implementation for M-mode systems

The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime.  The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.

This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.

Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Fix Kendryte K210 device tree

The Kendryte K210 SoC CLINT is compatible with Sifive clint v0
(sifive,clint0). Fix the Kendryte K210 device tree clint entry to be
inline with the sifive timer definition documented in
Documentation/devicetree/bindings/timer/sifive,clint.yaml.
The device tree clint entry is renamed similarly to u-boot device tree
definition to improve compatibility with u-boot defined device tree.
To ensure correct initialization, the interrup-cells attribute is added
and the interrupt-extended attribute definition fixed.

This fixes boot failures with Kendryte K210 SoC boards.

Note that the clock referenced is kept as K210_CLK_ACLK, which does not
necessarilly match the clint MTIME increment rate. This however does not
seem to cause any problem for now.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

riscv: Add sfence.vma after early page table changes

This invalidates local TLB after modifying the page tables during early init as
it's too early to handle suprious faults as we otherwise do.

Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings")
Reported-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Cleaned up the commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'

This moves the KCSAN kconfig items under menu 'Generic Kernel Debugging
Instruments' where UBSAN resides.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200904152224.5570-1-changbin.du@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
definition of dirtytime_interval_handler to match its prototype in
linux/writeback.h which fixes the following sparse error/warning:

fs/fs-writeback.c:2189:50: warning: incorrect type in argument 3 (different address spaces)
fs/fs-writeback.c:2189:50:    expected void *
fs/fs-writeback.c:2189:50:    got void [noderef] __user *buffer
fs/fs-writeback.c:2184:5: error: symbol 'dirtytime_interval_handler' redeclared with different type (incompatible argument 3 (different address spaces)):
fs/fs-writeback.c:2184:5:    int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )
fs/fs-writeback.c: note: in included file:
./include/linux/writeback.h:374:5: note: previously declared as:
./include/linux/writeback.h:374:5:    int extern [addressable] [signed] [toplevel] dirtytime_interval_handler( ... )

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093140.13434-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stackleak: let stack_erasing_sysctl take a kernel pointer buffer

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
signature of stack_erasing_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:

kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces)
kernel/stackleak.c:31:50:    expected void *
kernel/stackleak.c:31:50:    got void [noderef] __user *buffer

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ftrace: let ftrace_enable_sysctl take a kernel pointer buffer

Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:

kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43:    expected void *
kernel/trace/ftrace.c:7544:43:    got void [noderef] __user *buffer

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: drain per-cpu pages again during memory offline

There is a race during page offline that can lead to infinite loop:
a page never ends up on a buddy list and __offline_pages() keeps
retrying infinitely or until a termination signal is received.

Thread#1 - a new process:

load_elf_binary
 begin_new_exec
  exec_mmap
   mmput
    exit_mmap
     tlb_finish_mmu
      tlb_flush_mmu
       release_pages
        free_unref_page_list
         free_unref_page_prepare
          set_pcppage_migratetype(page, migratetype);
             // Set page->index migration type below  MIGRATE_PCPTYPES

Thread#2 - hot-removes memory
__offline_pages
  start_isolate_page_range
    set_migratetype_isolate
      set_pageblock_migratetype(page, MIGRATE_ISOLATE);
        Set migration type to MIGRATE_ISOLATE-> set
        drain_all_pages(zone);
             // drain per-cpu page lists to buddy allocator.

Thread#1 - continue
         free_unref_page_commit
           migratetype = get_pcppage_migratetype(page);
              // get old migration type
           list_add(&page->lru, &pcp->lists[migratetype]);
              // add new page to already drained pcp list

Thread#2
Never drains pcp again, and therefore gets stuck in the loop.

The fix is to try to drain per-cpu lists again after
check_pages_isolated_cb() fails.

Fixes: c52e75935f8d ("mm: remove extra drain pages on pcp list")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200903140032.380431-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20200904151448.100489-2-pasha.tatashin@soleen.com
Link: http://lkml.kernel.org/r/20200904070235.GA15277@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: fix display of page size in map_hugetlb

The displayed size is in bytes while the text says it is in kB.

Shift it by 10 to really display kBytes.

Fixes: fa7b9a805c79 ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/e27481224564a93d14106e750de31189deaa8bc8.1598861977.git.christophe.leroy@csgroup.eu
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix __split_huge_pmd_locked() for migration PMD

A migrating transparent huge page has to already be unmapped.  Otherwise,
the page could be modified while it is being copied to a new page and data
could be lost.  The function __split_huge_pmd() checks for a PMD migration
entry before calling __split_huge_pmd_locked() leading one to think that
__split_huge_pmd_locked() can handle splitting a migrating PMD.

However, the code always increments the page->_mapcount and adjusts the
memory control group accounting assuming the page is mapped.

Also, if the PMD entry is a migration PMD entry, the call to
is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead
of migration_entry_to_pfn(pmd_to_swp_entry(pmd)).  Fix these problems by
checking for a PMD migration entry.

Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [4.14+]
Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: fix kill kprobe which has been marked as gone

If a kprobe is marked as gone, we should not kill it again.  Otherwise, we
can disarm the kprobe more than once.  In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.

Fixes: e8386a0cb22f ("kprobes: support probing module __exit function")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: restore functionality of nr_inodes=0

Commit e809d5f0b5c9 ("tmpfs: per-superblock i_ino support") made changes
to shmem_reserve_inode() in mm/shmem.c, however the original test for
(sbinfo->max_inodes) got dropped.  This causes mounting tmpfs with option
nr_inodes=0 to fail:

  # mount -ttmpfs -onr_inodes=0 none /ext0
  mount: /ext0: mount(2) system call failed: Cannot allocate memory.

This patch restores the nr_inodes=0 functionality.

Fixes: e809d5f0b5c9 ("tmpfs: per-superblock i_ino support")
Signed-off-by: Byron Stanoszek <gandalf@winds.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Link: https://lkml.kernel.org/r/20200902035715.16414-1-gandalf@winds.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mlock: fix unevictable_pgs event counts on THP

5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has
established that vm_events should count every subpage of a THP, including
unevictable_pgs_culled and unevictable_pgs_rescued; but
lru_cache_add_inactive_or_unevictable() was not doing so for
unevictable_pgs_mlocked, and mm/mlock.c was not doing so for
unevictable_pgs mlocked, munlocked, cleared and stranded.

Fix them; but THPs don't go the pagevec way in mlock.c, so no fixes needed
on that path.

Fixes: 5d91f31faf8e ("mm: swap: fix vmstats for huge page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301408230.5954@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix check_move_unevictable_pages() on THP

check_move_unevictable_pages() is used in making unevictable shmem pages
evictable: by shmem_unlock_mapping(), drm_gem_check_release_pagevec() and
i915/gem check_release_pagevec().  Those may pass down subpages of a huge
page, when /sys/kernel/mm/transparent_hugepage/shmem_enabled is "force".

That does not crash or warn at present, but the accounting of vmstats
unevictable_pgs_scanned and unevictable_pgs_rescued is inconsistent:
scanned being incremented on each subpage, rescued only on the head (since
tails already appear evictable once the head has been updated).

5.8 commit 5d91f31faf8e ("mm: swap: fix vmstats for huge page") has
established that vm_events in general (and unevictable_pgs_rescued in
particular) should count every subpage: so follow that precedent here.

Do this in such a way that if mem_cgroup_page_lruvec() is made stricter
(to check page->mem_cgroup is always set), no problem: skip the tails
before calling it, and add thp_nr_pages() to vmstats on the head.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301405000.5954@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migration of hugetlbfs page skip memcg

hugetlbfs pages do not participate in memcg: so although they do find most
of migrate_page_states() useful, it would be better if they did not call
into mem_cgroup_migrate() - where Qian Cai reported that LTP's
move_pages12 triggers the warning in Alex Shi's prospective commit
"mm/memcg: warning on !memcg after readahead page charged".

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxch.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301359460.5954@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ksm: reinstate memcg charge on copied pages

Patch series "mm: fixes to past from future testing".

Here's a set of independent fixes against 5.9-rc2: prompted by
testing Alex Shi's "warning on !memcg" and lru_lock series, but
I think fit for 5.9 - though maybe only the first for stable.

This patch (of 5):

In 5.8 some instances of memcg charging in do_swap_page() and unuse_pte()
were removed, on the understanding that swap cache is now already charged
at those points; but a case was missed, when ksm_might_need_to_copy() has
decided it must allocate a substitute page: such pages were never charged.
Fix it inside ksm_might_need_to_copy().

This was discovered by Alex Shi's prospective commit "mm/memcg: warning on
!memcg after readahead page charged".

But there is a another surprise: this also fixes some rarer uncharged
PageAnon cases, when KSM is configured in, but has never been activated.
ksm_might_need_to_copy()'s anon_vma->root and linear_page_index() check
sometimes catches a case which would need to have been copied if KSM were
turned on.  Or that's my optimistic interpretation (of my own old code),
but it leaves some doubt as to whether everything is working as intended
there - might it hint at rare anon ptes which rmap cannot find?  A
question not easily answered: put in the fix for missed memcg charges.

Cc; Matthew Wilcox <willy@infradead.org>

Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [5.8]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301343270.5954@eggly.anvils
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008301358020.5954@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: add older email addresses for Kees Cook

This adds explicit mailmap entries for my older/other email addresses.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lkml.kernel.org/r/20200910193939.3798377-1-keescook@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 's390-5.9-6' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix order in trace_hardirqs_off_caller() to make locking state
   consistent even if the IRQ tracer calls into lockdep again. Touches
   common code. Acked-by Peter Zijlstra.

 - Correctly handle secure storage violation exception to avoid kernel
   panic triggered by user space misbehaviour.

 - Switch the idle->seqcount over to using raw_write_*() to avoid
  "suspicious RCU usage".

 - Fix memory leaks on hard unplug in pci code.

 - Use kvmalloc instead of kmalloc for larger allocations in zcrypt.

 - Add few missing __init annotations to static functions to avoid
   section mismatch complains when functions are not inlined.

* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: add 3f program exception handler
  lockdep: fix order in trace_hardirqs_off_caller()
  s390/pci: fix leak of DMA tables on hard unplug
  s390/init: add missing __init annotations
  s390/zcrypt: fix kmalloc 256k failure
  s390/idle: fix suspicious RCU usage

i2c: mxs: use MXS_DMA_CTRL_WAIT4END instead of DMA_CTRL_ACK

The driver-specific usage of the DMA_CTRL_ACK flag was replaced with a
custom flag in commit ceeeb99cd821 ("dmaengine: mxs: rename custom flag"),
but i2c-mxs was not updated to use the new flag, completely breaking I2C
transactions using DMA.

Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>