drm/amdkfd: Add CU-masking ioctl to KFD

CU-masking allows a KFD client to control the set of CUs used by a
user mode queue for executing compute dispatches. This can be used
for optimizing the partitioning of the GPU and minimize conflicts
between concurrent tasks.

Signed-off-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amd: Add CU-masking ioctl definition to kfd_ioctl.h

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Enable Raven for KFD

Add DID and kfd_device_info for Raven.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Optimize out some duplicated code in kfd_signal_iommu_event()

memory_exception_data is already initialized for not-present faults.
It only needs to be overridden for permission faults.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Workaround to accommodate Raven too many PPR issue

On Raven multiple PPRs can be queued up by the hardware. When the
first of those requests is handled by the IOMMU driver, the memory
access succeeds. After that the application may be done with the
memory and unmap it. At that point the page table entries are
invalidated, but there are still outstanding duplicate PPRs for those
addresses. When the IOMMU driver processes those duplicate requests,
it finds invalid page table entries and triggers an invalid PPR fault.

As a workaround, don't signal invalid PPR faults on Raven to avoid
segfaulting applications that haven't done anything wrong. As a side
effect, real GPU memory access faults may go unnoticed by the
application.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Avoid flooding dmesg on Raven due to IOMMU issues

On Raven Invalid PPRs (peripheral page requests) can be reported
because multiple PPRs can be still queued when memory is freed.
Apply a rate limit to avoid flooding the log in this case.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Make SDMA engine number an ASIC-dependent variable

On Raven there is only one SDMA engine instead of previously assumed two,
so we need to adapt our code to this new scenario.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Consolidate duplicate memory banks info in topology

If there are several memory banks that has the same properties in CRAT,
we aggregate them into one memory bank. This cleans up memory banks on
APUs (e.g. Raven) where the CRAT reports each memory channel as a
separate bank. This only confuses user mode, which only deals with
virtual memory.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Clean up reference of radeon

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Replace mqd with mqd_mgr as the variable name for mqd_manager

This will make reading code much easier.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Use module parameters noretry as the internal variable name

This makes all module parameters use the same form. Meanwhile clean up
the surrounding code.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Introduce KFD module parameter halt_if_hws_hang

This avoids triggering a GPU reset or otherwise changing the HW
state. Instead KFD will hang, which allows HW debugging tools to
analyze the problem.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add debugfs interface to trigger HWS hang

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Avoid destroy hqd when GPU is on reset

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Avoid invalidate tlbs when gpu is on reset

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix kernel queue 64 bit doorbell offset calculation

The bitmap index calculation should reverse the logic used on allocation
so it will clear the same bit used on allocation

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Check NULL pointer for job before reset job's ring

job could be NULL when amdgpu_device_gpu_recover is called

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Don't use shadow BO for compute context

Compute contexts cannot keep going after a GPU reset. Currently the process
must terminate. In the future a process may be able recreate its context
from scratch. Either way, there is no need to restore the GPUVM page table
from shadow BOs.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Implement hang detection in KFD and call amdgpu

The reset will be performed in a new hw_exception work thread to
handle HWS hang without blocking the thread that detected the hang.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Enable the gpu reset from KFD

Hook up the gpu_recover callback from KFD to amdgpu to enable
handling of GPU hangs detected by KFD.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Implement GPU reset handlers in KFD

Lock KFD and evict existing queues on reset. Notify user mode by
signaling hw_exception events.

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: Call KFD reset handlers during GPU reset

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Add gpu reset interface and place holder

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amd: Add kfd ioctl defines for hw_exception event

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amd: Add gpu reset interfaces between amdgpu and amdkfd

Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: fix zero reading of VMID and PASID for Hawaii

Upon VM Fault, the VMID and PASID written by HW are zeros in
Hawaii. Instead of reading from ih_ring_entry, read directly
from the registers. This workaround fix the soft hang issues
caused by mishandled VM Fault in Hawaii.

Signed-off-by: Lan Xiao <Lan.Xiao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Handle VM faults in KFD

1. Pre-GFX9 the amdgpu ISR saves the vm-fault status and address per
   per-vmid. amdkfd needs to get the information from amdgpu through the
   new get_vm_fault_info interface. On GFX9 and later, all the required
   information is in the IH ring
2. amdkfd unmaps all queues from the faulting process and create new
   run-list without the guilty process
3. amdkfd notifies the runtime of the vm fault trap via EVENT_TYPE_MEMORY

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdgpu: save vm fault information for amdkfd

amdgpu save the vm fault related information for KFD usage and keep the
copy until KFD read it.

Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: send SIGSEGV to process upon KFD_EVENT_TYPE_MEMORY

Signed-off-by: Moses Reuben <moses.reuben@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix error codes in kfd_get_process

Return ERR_PTR(-EINVAL) if kfd_get_process fails to find the process.
This fixes kernel oopses when a child process calls KFD ioctls with
a file descriptor inherited from the parent process.

Signed-off-by: Wei Lu <wei.lu2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Fix race between scheduler and context restore

The scheduler may raise SQ_WAVE_STATUS.SPI_PRIO via SQ_CMD before
context restore has completed. Restoring SPI_PRIO=0 after this point
may cause context save to fail as the lower priority wavefronts
are not selected for execution among spin-waiting wavefronts.

Leave SPI_PRIO at its SPI-initialized or scheduler-raised value.

v2: Also fix race with exception handler

Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Stop using GFP_NOIO explicitly

This is no longer needed with the memalloc_nofs_save/restore in
dqm_lock/unlock.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/amdkfd: Reliably prevent reclaim-FS while holding DQM lock

This is needed to prevent deadlocks when MMU notifiers run in
reclaim-FS context and take the DQM lock for userptr evictions.
Previously this was done by making all memory allocations under
DQM locks GFP_NOIO. This is error prone. Using
memalloc_nofs_save/restore will reliably affect all memory
allocations anywhere in the kernel while the DQM lock is held.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drm/admkfd use modern ktime accessors

getrawmonotonic64() and get_monotonic_boottime64() are deprecated
because of the nonstandard naming.

The replacement functions ktime_get_raw_ns() and ktime_get_boot_ns()
also simplify the callers.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next

Updates for 4.19.  Mostly bug fixes and cleanups.  Highlights:
- Internal API cleanup in GPU scheduler
- Decouple i2c and aux abstractions in DC
- Update maintainers
- Misc cleanups
- Misc bug fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725215326.2709-1-alexander.deucher@amd.com

Merge tag 'exynos-drm-next-for-v4.19' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

Cleanups
- Change g2d driver to component based driver
  . g2d driver was last customed sub driver so this patch series
    changes it to component based driver, which also makes gem handling
    to be more simplify.
- Cleanup of Exynos DRM suspend/resume
  . Register exynos drm core suspend/resume functions
    to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
    callbacks to ensure exynos_drm_suspend() is called before any suspend
    callback from the real devices to avoid some issues on boards with
    complex pipelines.
  . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
    to ensure that resources of each devices will be released
    for the system PM suspend/resume cycle.
- Remove local value not used.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532505748-10025-1-git-send-email-inki.dae@samsung.com

Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld into drm-next

I have a couple of small patches for malidp to be applied in drm-next.
They have arisen from the decision to switch the writeback connectors to
always connected.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180723145302.GA28052@e110455-lin.cambridge.arm.com

Merge tag 'imx-drm-next-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: cleanup and csi improvements

- Remove the unused struct imx_drm_crtc and the unused pipes field
  from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
  as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
  necessary to support writing captured bottom-top interlaced
  fields to memory with interleaved lines.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532100583.3438.9.camel@pengutronix.de

gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()

cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc9: clarify GPUVM fault error message

The address printed is the actual address, not the page.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: remove sched field from the entity

The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: modify API to avoid redundancy

entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reduce the number of placements for a BO

Make struct amdgpu_bo a bit smaller.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: consistenly name amdgpu_bo_ functions

Just rename functions, no functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MAINTAINERS: add entry for AMD PP code

Add separate entry for the power managent code on AMD GPUs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MAINTAINERS: Add separate section for DC

Note that Harry and Leo Li are maintainers for that stuff.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

MAINTAINERS: add new TTM maintainers

Roger unfortunately doesn't work for AMD any longer. So add Rui and
Jerry as co-maintainer as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expose only the first UVD instance for now

Going to completely rework the context to ring mapping with Nayan's GSoC
work, but for now just stopping to expose the second UVD instance should
do it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clean up coding style a bit

No need to bitcast a boolean and even if we should use "!!" instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DC 3.1.58

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: separate dc_debug into dc_debug_options and dc_debug data

[why]
confusing as to which part of debug is informational, and which part causes behavioral change

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decouple aux from i2c

[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.

[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DPP CM ICSC AYCRCB8888 format support

[why]
Diags has POR to run the video workload using AYCRCB8888 through DCN;
capture it through DWB and send it to VCN hardware to encode

[how]
added the code to support this format so that DPP ICSC will be able to
convert it from YUV444 to internal RGB and DWB OCSC will be able to
convert from internal RGB to YUV420

Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: On dce100, set clocks to 0 on suspend

[Why]
When a dce100 asic was suspended, the clocks were not set to 0.
Upon resume, the new clock was compared to the existing clock,
they were found to be the same, and so the clock was not set.
This resulted in a pernicious blackscreen.

[How]
In atomic commit, check to see if there are any active pipes.
If no, set clocks to 0

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: allow diags to skip initial link training

[why]
diag specify what the full config and is only concerned about pass/fail at the end

having inter-op code like verifiying we can actually train at reported link rate
slows down diag test and add complexity we don't need

[how]
add dc_debug option to skip capability link trianing

also  remove hbr in function name as verify is not specific to hbr

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Ken Chalmers <ken.chalmers@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary warning

[why]
The warning message floods the dmesg log on Tonga even
though it is expected to have a pix_clk set to zero,
when the pipe is not active.
[how]
remove the assert

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move the amdgpu_fbdev_set_suspend() further up

This patch moves amdgpu_fbdev_set_suspend() to the beginning
of suspend sequence.

This is to ensure fbcon does not to write to the VRAM
after GPU is powerd down.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Don't warn on destroying a pinned BO

The warning turned out to be not so useful, as BO destruction tends to
be deferred to a workqueue.

Also, we should be preventing any damage from this now, so not really
important anymore to fix code doing this.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: allow slow switch only if NBPState enabled v2

Otherwise there may be potential SMU performance issues.

v2: fix commit description and coding style

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct the argument for PPSMC_MSG_SetUclkFastSwitch

The argument was set wrongly. Fast/slow switch was asked when there is
actually a slow/fast switch needed.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: slow UCLK switch when multiple displays not in sync

Slow switch for UCLK when there is multiple displays and they are
not in sync.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <rex.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix RLC safe mode test in gfx_v9_0_enter_rlc_safe_mode

We were testing the register offset, instead of the value stored in the
register, therefore always timing out the loop.

This reduces suspend time of the system in the bug report below by ~600
ms.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/107277
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/exynos/mixer: Remove unused local variable priv

Remove local variable 'priv' to fix GCC warning:

    drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize':
    drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable]

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Ensure suspended runtime PM state during system suspend

Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for
all drivers for the real Exynos DRM hardware modules. This ensures that
the resources will be released for the system PM suspend/resume cycle.
Exynos DRM core already takes care of suspending the whole display pipeline
before PM callbacks of the real devices are called.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Suspend/resume display pipeline as early/late as possible

In the current code, exynos_drm_suspend() function is called after all
real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM
virtual platform device is created as last device in the system (as
a part of DRM registration). None of the devices for real hardware
modules has its own system suspend/resume callbacks, so it doesn't
change any order of the executed code, but it has a side-effect:
runtime PM callbacks for real devices are not executed, because those
devices are considered by PM core as already suspended. This might
cause issues on boards with complex pipelines, where something
depends on the runtime PM state of the given device.

To ensure that exynos_drm_suspend() is called before any suspend
callback from the real devices, assign it to .prepare callback. Same
for exynos_drm_resume(), using .complete callback ensures that all
real devices have been resumed when calling it.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Drop useless check from exynos_drm_{suspend,resume}

The virtual Exynos DRM device has no runtime PM enabled, so checking
for its runtime suspended state is useless.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Use common exynos_drm_gem_get()/put() functions for GEM lookup

Use recently introduced common helpers to unify GEM handling code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: gem: Simplify access to exynos GEM objects

Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler
function exynos_drm_gem_get(). This lets the caller to get access to
exynos_drm_gem object and extract any information about GEM object
without searching object tree for getting each parameter.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: g2d: Convert to driver component API

Exynos G2D driver is the last client of the custom Exynos 'sub-driver'
framework. In the current state it doesn't really resolve any of the
issues it has been designed for, as Exynos DRM is already built only
as a single kernel module. Remove the custom 'sub-driver' framework and
simply use generic component framework also in G2D driver.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git./linux/kernel/git/daeinki/drm-exynos into exynos-drm-next

Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
  . An align problem of width size that IPP driver incorrectly
    calculated the real buffer size.
  . Horizontal and vertical flip problem.
  . Per-plane global alpha for XRGB modes.
  . Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
  . The stange order of overlapping planes on XRGB modes
    by setting global alpha value to maximum value.

Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
  drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
  . it replaces several reference/unreference functions with Linux
    kernel nameing standard.

drm: mali-dp: Set encoder possible_clones

Set possible_clones field to report that the writeback connector and
the one driving the display could be enabled at the same time.

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm: mali-dp: Report writeback connector as connected

Older version of this patch series reported writeback as disconnected
to avoid confusing userspace not aware of writeback connectors.
However, the version that got merged uses a special cap
(DRM_CLIENT_CAP_WRITEBACK_CONNECTORS) for this purpose.

This helps us avoid some special handling of writeback connector
in drm_helper_probe_single_connector_modes, see [1].

https://lists.freedesktop.org/archives/dri-devel/2018-July/183144.html

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/amdgpu: rework suspend and resume to deal with atomic changes

Use the newly split ip suspend functions to do suspend displays
first (to deal with atomic so that FBs can be unpinned before
attempting to evict vram), then evict vram, then suspend the
other IPs.  Also move the non-DC pinning code to only be
called in the non-DC cases since atomic should take care of
DC.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107065
Fixes: e00fb85 drm: Stop updating plane->crtc/fb/old_fb on atomic drivers
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: split ip suspend into 2 phases

We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases. Do DCE first
to deal with atomic, then do the rest.

Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/acpi: skip backlight events for DC

No change in behavior, just bail sooner.

Reviewed-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/apci: don't call sbios request function if it's not supported

Check the supported functions mask before calling the bios
requests method.

Reviewed-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warning in dma_fence_is_later on resume from S3.

Problem:
amdgpu_ttm_set_buffer_funcs_status destroys adev->mman.entity on suspend
without releasing adev->mman.bdev.man[TTM_PL_VRAM].move fence
so on resume the new drm_sched_entity.fence_context causes
the warning against the old fence context which is different.

Fix:
When destroying sched_entity in amdgpu_ttm_set_buffer_funcs_status
release  man->move and set the pointer to NULL.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use drm_fb helper for console_(un)lock

This patch removes the usage of console_(un)lock
by replacing drm_fb_helper_set_suspend() to
drm_fb_helper_set_suspend_unlocked() which locks and
unlocks the console instead of locking ourselves.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Convert 10kHz clks from PPLib into kHz

Except special naming as *_in_khz, The default clock unit in powerplay
is in 10KHz. so need to * 10 as expecting clock frequency in display
is in kHz.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Set Max clock level to display by default

avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Update clk with od setting when set power state

This can fix the issue resume from S3, the user's OD setting
were reverted to default.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Read vbios vddc limit before use them

Use the vddc limit before read them from vbios

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: lock and unlock console only for amdgpu_fbdev_set_suspend [V5]

[Why]
While the console_lock is held, console output will be buffered, till
its unlocked it wont be emitted, hence its ideal to unlock sooner to enable
debugging/detecting/fixing of any issue in the remaining sequence of events
in resume path.
The concern here is about consoles other than fbcon on the device,
e.g. a serial console

[How]
This patch restructures the console_lock, console_unlock around
amdgpu_fbdev_set_suspend() and moves this new block appropriately.

V2: Kept amdgpu_fbdev_set_suspend after pci_set_power_state
V3: Updated the commit message to clarify the real concern that this patch
    addresses.
V4: code clean-up.
V5: fixed return value

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Honor pplib stutter mask for all ASICs in DC

[Why]
We were only setting this mask for DCN, but should really use it
universally for all ASICs.

[How]
Move the assignment out of the Raven switch statement for all ASICs
other than Stoney and Carrizo.

v2: Keep stutter always on for Carrizo and Stoney (Alex)

Cc: Rex.Zhu@amd.com
Cc: Feifei.Xu@amd.com
Cc: Kenneth.Feng@amd.com
Cc: Evan.Quan@amd.com
Cc: Bhawanpreet.Lakha@amd.com
Cc: Jordan.Lazare@amd.com
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unused backlight functions in DM

These are only ever called for non-DC code.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix spelling mistake "successed" -> "succeeded"

Trivial fix to spelling mistake in dev_err error message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next

More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-2018-07-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

On GEM side:

- GuC related fixes (Chris, Michal)
- GTT read-only pages support (Jon, Chris)
- More selftests fixes (Chris)
- More GPU reset improvements (Chris)
- Flush caches after GGTT writes (Chris)
- Handle recursive shrinker for vma->last_active allocation (Chris)
- Other execlists fixes (Chris)

On Display side:

- GLK HDMI fix (Clint)
- Rework and cleanup around HPD pin (Ville)
- Preparation work for Display Stream Compression support coming on ICL (Anusha)
- Nuke LVDS lid notification (Ville)
- Assume eDP is always connected (Ville)
- Kill intel panel detection (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA

# Conflicts:
# drivers/gpu/drm/i915/intel_lrc.c
Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com

Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.19:

Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)

Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma

Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-next

misc fixes and cleanups for next.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv55CfRonQ0bo2XiitkCiWTjKwhsP=+ZFhoa-BaJ72Ryew@mail.gmail.com

drm/amdgpu: clean up UVD instance handling v2

The whole handle, filp and entity handling is superfluous here.

We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.

v2: fix one more missed case in amdgpu_uvd_suspend

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove superflous UVD encode entity

Not sure what that was every used for, but now it is completely unused.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86

Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fixed uninitialized value

The 'result' is not initialized correctly. It causes the API
return an error code even on success.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/powerplay: use irq source defines for smu7 sources

Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.

Rewiewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Update DRIVER_DATE to 20180719

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Remove intel_panel_detect()

With neither LVDS or eDP no longer using intel_panel_detect() we can
kill it, and the accompanying modparam.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Assume eDP is always connected

We never registered any kind of lid notifier for eDP, so looking at the
lid status is pretty much bonkers. Let's just consider eDP always
connected instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Nuke the LVDS lid notifier

We broke the LVDS notifier resume thing in (presumably) commit
e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.

Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).

If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.

With the notifier gone we'll also stop looking at the panel status
in ->detect().

v2: Nuke enum modeset_restore (Rodrigo)

Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/execlists: Move the assertion we have the rpm wakeref down

There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985c32d ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk