Liu Ying [Thu, 14 Nov 2019 08:27:15 +0000 (16:27 +0800)]
arm64: dts: imx8qxp-mek: Add LVDS0/1 PWM backlight support
This patch adds LVDS0/1 PWM backlight support
for the i.MX8QXP MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Thu, 14 Nov 2019 08:24:01 +0000 (16:24 +0800)]
arm64: dts: imx8qm-mek: Add LVDS0/1 PWM backlight support
This patch adds LVDS0/1 PWM backlight support
for the i.MX8QM MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Fri, 15 Nov 2019 02:08:39 +0000 (10:08 +0800)]
arm64: imx8qxp-ss-lvds.dtsi: Add properties of aux ldb to support split mode
This patch adds properties of auxiliary ldb to support LDB split mode
for i.MX8QXP MIPI DSI/LVDS subsystem device tree.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Thu, 14 Nov 2019 08:16:31 +0000 (16:16 +0800)]
arm64: imx8qxp-ss-lvds.dtsi: Add pwm_mipi_lvds0/1 support
This patch adds pwm_mipi_lvds0/1 support for
i.MX8QXP MIPI DSI/LVDS subsystem device tree.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Thu, 14 Nov 2019 08:10:09 +0000 (16:10 +0800)]
arm64: imx8qm-ss-lvds.dtsi: Add pwm_lvds0/1 support
This patch adds pwm_lvds0/1 support for
i.MX8QM LVDS subsystem device tree.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Thu, 14 Nov 2019 08:02:11 +0000 (16:02 +0800)]
arm64: imx8qxp-ss-lvds.dtsi: Add mipi0/1_pwm_lpcg clocks support
This patch adds mipi0/1_pwm_lpcg clocks support for
i.MX8QXP MIPI DSI/LVDS subsystem device tree.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Thu, 14 Nov 2019 07:49:47 +0000 (15:49 +0800)]
arm64: imx8qm-ss-lvds.dtsi: Add lvds0/1_pwm_lpcg clocks support
This patch adds lvds0/1_pwm_lpcg clocks support for
i.MX8QM LVDS subsystem device tree.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Clark Wang [Wed, 13 Nov 2019 06:43:39 +0000 (14:43 +0800)]
MLK-22965 ARM64: dts: imx8dxl-phantom: add partition reset function
Enable rpsmg to add partition reset function support for imx8dxl-phantom
platform.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Shengjiu Wang [Fri, 15 Nov 2019 07:30:35 +0000 (15:30 +0800)]
arm64: dts: imx8mm: add fsl,dataline for SAI node
Add fsl,dataline for SAI node
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Haibo Chen [Fri, 15 Nov 2019 07:03:36 +0000 (15:03 +0800)]
MLK-21653-3 arm: dts: add 'auto-cmd23-broken' for eMMC on imx6sx
Broken the auto cmd23 function for eMMC on imx6qpdl/imx6sx/imx7d, otherwise
the eMMC RPMB write access will return general fail.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Fugang Duan [Fri, 15 Nov 2019 03:58:32 +0000 (11:58 +0800)]
MLK-22985 ARM: dts: imx7d sdb: remove the duplicated pin for uart6 node
Remove the duplicated pin function for uart6 node.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Han Xu [Thu, 14 Nov 2019 04:12:45 +0000 (22:12 -0600)]
arm64: dts: add imx8qxp gpmi-nand dts
add gpmi-nand dts for nand support on imx8qxp val
Signed-off-by: Han Xu <han.xu@nxp.com>
Dong Aisheng [Thu, 14 Nov 2019 09:32:16 +0000 (17:32 +0800)]
MLK-22974-3 ARM: dts: imx7d sdb: reserve CMA memory for Display
Reserve CMA memory for Display
[ Aisheng: Ported from 4.19 GA ]
Tested-by: Robby Cai <robby.cai@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Dong Aisheng [Thu, 14 Nov 2019 09:27:55 +0000 (17:27 +0800)]
MLK-22974-2 ARM: dts: imx6sl/sll-evk: reserve CMA memory for Display
Reserve CMA memory for Display
[ Aisheng: Ported from 4.19 GA ]
Tested-by: Robby Cai <robby.cai@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Dong Aisheng [Thu, 14 Nov 2019 09:20:39 +0000 (17:20 +0800)]
MLK-22974-1 ARM: dts: imx6ul-evk: reserve CMA memory for GPU/MM/Display
Reserve CMA memory for GPU/MM/Display
[ Aisheng: Ported from 4.19 GA ]
Tested-by: Robby Cai <robby.cai@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Shengjiu Wang [Thu, 14 Nov 2019 05:31:57 +0000 (13:31 +0800)]
MLK-22764: ARM: dts: imx7ulp: Change sound card name
Change the sound card name from "rpmsg-audio" to "wm8960-audio".
That we can utilize the /var/lib/alsa/asound.state config
file to share same configuration as wm8960 sound card.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Fugang Duan [Wed, 13 Nov 2019 09:52:07 +0000 (17:52 +0800)]
MLK-22970 ARM: dts: imx6sll-evk: enable uart5 for bluetooth
Add uart5 port for bluetooth HCI interface.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Wed, 13 Nov 2019 07:25:09 +0000 (15:25 +0800)]
MLK-22918 arm64: dts: imx8: add the alias for ethernet
Add alias for ethernet nodes.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Minjie Zhuang [Wed, 13 Nov 2019 07:39:24 +0000 (15:39 +0800)]
ARM: dts: imx6/7: reserve CMA memory for GPU
At imx6dl/imx6q/imx6sx,reserve 320M CMA memory
At imx7ulp,reserve 200M CMA memory
Signed-off-by: Minjie Zhuang <minjie.zhuang@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:45:35 +0000 (10:45 +0800)]
arm64: dts: imx8qm-mek: Enable dc0/1_pc nodes
This patch enables dc0/1_pc device tree nodes for
the i.MX8QM MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:44:39 +0000 (10:44 +0800)]
arm64: dts: imx8qxp-mek: Enable dc0_pc node
This patch enables dc0_pc device tree node for
the i.MX8QXP MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:42:12 +0000 (10:42 +0800)]
arm64: imx8-ss-dc1.dtsi: Add dc1_pc phandle for dpu2
This patch adds dc1_pc phandle for dpu2 node.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:41:06 +0000 (10:41 +0800)]
arm64: imx8-ss-dc0.dtsi: Add dc0_pc phandle for dpu1
This patch adds dc0_pc phandle for dpu1 node.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:38:31 +0000 (10:38 +0800)]
arm64: imx8-ss-dc1.dtsi: Add pixel combiner node support
This patch adds pixel combiner device tree node support
for the i.MX8 DC1 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Tue, 12 Nov 2019 02:37:19 +0000 (10:37 +0800)]
arm64: imx8-ss-dc0.dtsi: Add pixel combiner node support
This patch adds pixel combiner device tree node support
for the i.MX8 DC0 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Fugang Duan [Wed, 13 Nov 2019 06:02:07 +0000 (14:02 +0800)]
MLK-22964 arm64: dts: imx8dxl-phantom-mek: add nvmem for fec2 node
Add nvmem for fec2 node to get MAC address from eFuse.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Wed, 13 Nov 2019 05:55:12 +0000 (13:55 +0800)]
MLK-22962 arm64: dts: imx8qxp: correct fec2 compatible string
commit
3a1309af0048(arm64: dts: imx8qxp: update fec fallback
compatible string) not completely correct the fec compatible
string that only change fec1 node, not fec2 node. So the patch
correct fec2 node compatible string.
Fixes:
4f3c854068e4(arm64: dts: imx8qxp: orginize dts in subsystems)
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Wed, 13 Nov 2019 03:17:11 +0000 (11:17 +0800)]
MLK-22961 arm64: dts: imx8dxl-phantom-mek: enable epdev for pcie wlan
Enable epdev regulator for pcie wlan on imx8dxl phantom mek.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Tue, 12 Nov 2019 11:53:18 +0000 (19:53 +0800)]
MLK-22960 ARM: dts: imx6sll-evk-btwifi: enable oob irq in default
Enable oob irq in default for imx6sll evk board.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Tue, 12 Nov 2019 11:32:48 +0000 (19:32 +0800)]
MLK-22959 ARM: dts: imx6sll-evk-btwifi: remove pin function node
Remove pin function node "imx6sll-evk-murata-v2" since
default dts "imx6sll-evk.dts" iomux node already remove
board pin function node.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Adriana Reus [Wed, 12 Apr 2017 10:45:13 +0000 (13:45 +0300)]
MLK-14451 ARM: dts: imx7ulp: Move dts entry for sensors into another dts
Sensors are connected to M4 and not to A-Core.
Sensors will not be exposed to A-Core via standard
i2c interface but via an i2c proxy layer over rpmsg.
Remove the dts entry to avoid the probe error messages and
add a separate dts file for the case where someone wishes to
rework the board themselves and connect sensors for testing purposes.
Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
(cherry picked from commit
05f0c61222bcb43b400b239d780df1ee55c5668f)
Clark Wang [Tue, 12 Nov 2019 06:59:59 +0000 (14:59 +0800)]
MLK-22921-4 ARM64: dts: imx8qxp/qm: add lpspi dts files
Add lpspi mater and slave dts files for imx8qxp/qm platforms.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Clark Wang [Thu, 7 Nov 2019 06:07:50 +0000 (14:07 +0800)]
MLK-22921-3 ARM: dts: imx7ulp: add lpspi slave dts support
Add some missing dts files of imx7ulp which file names have
been changed in 4.19.y.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Clark Wang [Tue, 12 Nov 2019 05:58:01 +0000 (13:58 +0800)]
MLK-22921-2 ARM: dts: imx6ul: fix compile warning of spi slave dts
Add a address-cells property to fix compile warning of -ecspi-slave.dts.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Robin Gong [Tue, 12 Nov 2019 17:55:11 +0000 (01:55 +0800)]
ARM: dts: imx6: add *ldo dtb file
Add *ldo dtb board file to support board work in ldo-enable mode.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Fugang Duan [Mon, 11 Nov 2019 02:47:20 +0000 (10:47 +0800)]
MLK-16483 ARM64: dts: imx8mq-evk-pcie1-m2: add pcie1 M.2 interface support
Add pcie1 M.2 interface support.
The patch merged from commit:
21cb81b4f0bc(MLK-21084 arm64: dts: Copy all imx8 dts)
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Robin Gong [Mon, 11 Nov 2019 19:44:05 +0000 (03:44 +0800)]
MLK-22284-3 ARM64: dts: freescale: imx8dx/qm: split dma channel power domain
Split dma channel power domain from sub-domain of dma customer driver
such as Audio, LPUART etc.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Haibo Chen [Fri, 8 Nov 2019 02:22:31 +0000 (10:22 +0800)]
MLK-22930 ARM64: dts: change the source clock rate of usdhc1 for imx8qxp/imx8qm
On imx8qxp and imx8qm mek board, usdhc1 is for eMMC usage, and will work at
HS400 mode, this HS400 mode will work at 200MHz, and will default divide 2 from
source clock(IMX_SC_R_SDHC_0), which mean we need to config the source clock
to 400MHz at least.
Before this patch, HS400 mode only work at 100MHz, and will meet some timeout issue
when do system suspend/resume, due to our HS400 related timing setting is based on
the 200MHz. Also, HS400 work at 100MHz will impact the performance.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Anson Huang <Anson.Huang@nxp.com>
[ Aisheng: moved the change to board dts ]
Sign-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Leonard Crestez [Fri, 8 Nov 2019 17:21:44 +0000 (19:21 +0200)]
Revert "arm64: dts: imx8mq: Disable sysctr because it breaks cpuidle"
This reverts commit
9b9ae1e2d639973ca826f839717e2b2405df5f51.
Was an emergency hotfix but real problem was solved
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:29:53 +0000 (10:29 +0800)]
arm64: dts: imx8qm-mek: Enable dc0/1_dpr1_channel3 and dc0/1_dpr2_channel1-3 nodes
This patch enables dc0/1_dpr1_channel3 and dc0/1_dpr2_channel1-3 nodes
for the i.MX8QM MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:28:20 +0000 (10:28 +0800)]
arm64: dts: imx8qxp-mek: Enable dc0_dpr1_channel3 and dc0_dpr2_channel1-3 nodes
This patch enables dc0_dpr1_channel3 and dc0_dpr2_channel1-3 nodes
for the i.MX8QXP MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:25:53 +0000 (10:25 +0800)]
arm64: dts: imx8qm-mek: Enable dc0_prg3-9 and dc1_prg3-9 nodes
This patch enables dc0_prg3-9 and dc1_prg3-9 device tree nodes for
the i.MX8QM MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:23:58 +0000 (10:23 +0800)]
arm64: dts: imx8qxp-mek: Enable dc0_prg3-9 nodes
This patch enables dc0_prg3-9 device tree nodes for
the i.MX8QXP MEK platform.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:19:07 +0000 (10:19 +0800)]
arm64: imx8-ss-dc1.dtsi: Add dc1_dpr1_channel3 and dc1_dpr2_channel1-3 phandles for dpu2
This patch adds dc1_dpr1_channel3 and dc1_dpr2_channel1-3 phandles for dpu2
node.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:16:57 +0000 (10:16 +0800)]
arm64: imx8-ss-dc0.dtsi: Add dc0_dpr1_channel3 and dc0_dpr2_channel1-3 phandles for dpu1
This patch adds dc0_dpr1_channel3 and dc0_dpr2_channel1-3 phandles for dpu1
node.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:15:02 +0000 (10:15 +0800)]
arm64: imx8-ss-dc1.dtsi: Add dc1_dpr1_channel3 and dc1_dpr2_channel1-3 support
This patch adds dc1_dpr1_channel3 and dc1_dpr2_channel1-3 device tree
nodes support for i.MX8 DC1 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:12:54 +0000 (10:12 +0800)]
arm64: imx8-ss-dc0.dtsi: Add dc0_dpr1_channel3 and dc0_dpr2_channel1-3 support
This patch adds dc0_dpr1_channel3 and dc0_dpr2_channel1-3 device tree
nodes support for i.MX8 DC0 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 02:05:44 +0000 (10:05 +0800)]
arm64: imx8-ss-dc1.dtsi: Add dc1_prg3 to dc1_prg9 support
This patch adds dc1_prg3 to dc1_prg9 device tree nodes support
for i.MX8 DC1 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Liu Ying [Mon, 11 Nov 2019 01:58:28 +0000 (09:58 +0800)]
arm64: imx8-ss-dc1.dtsi: Add dc1_prg3 to dc1_prg9 support
This patch adds dc1_prg3 to dc1_prg9 device tree nodes support
for i.MX8 DC0 subsystem.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Peng Fan [Mon, 11 Nov 2019 03:33:20 +0000 (11:33 +0800)]
MLK-22939 arm64: dts: imx8-ss-img: fix gpio reg
Fix gpio reg
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
richard zhu [Fri, 8 Nov 2019 09:35:39 +0000 (17:35 +0800)]
arm64: dts: imx8qm: specify the sid of sata module
Specify the SID of SATA. Otherwise, uboot would configure the SID by
the power domain.
And would break PCIe functions since SATA module has PCIe's power
domain too.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Tue, 5 Nov 2019 09:17:21 +0000 (17:17 +0800)]
MLK-22902 arm64: dts: imx8qm-ss-hdmi: fix i2c0_hdmi node
The reg property is wrong, address/size cells are 1
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Sandor Yu <Sandor.yu@nxp.com>
Fugang Duan [Fri, 8 Nov 2019 06:34:01 +0000 (14:34 +0800)]
MLK-22933 ARM: dts: imx6qdl-sabreauto: disable gpmi node due to pin conflict
GPMI NAND has pin conflict with uart3, and there already
have extra dts "*-gpmi-weim.dts" files to enable GPMI, so
disable GPMI in sabreauto default dts.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Fugang Duan [Thu, 7 Nov 2019 09:43:13 +0000 (17:43 +0800)]
MLK-22932 ARM: dts: imx6qdl: apply ENET IRQ workaround for sabresd/sabreauto boards
i.MX6Q/DL ENET cannot wake up system in wait mode because ENET
tx & rx interrupt signal don't connect to GPC. Add ENET GPIO IRQ
workaround for sabresd/sabreauto boards.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
richard zhu [Thu, 7 Nov 2019 10:04:21 +0000 (18:04 +0800)]
arm64: dts: freescale: add the rpmsg node on imx8dxl phantom mek board
Add the RPMSG node on iMX8DXL phantom MEK board.
Signed-off-by: richard zhu <hongxing.zhu@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
richard zhu [Thu, 7 Nov 2019 09:56:56 +0000 (17:56 +0800)]
arm64: dts: freescale: Add the pcie on imx8dxl phantom mek board
Add the PCIe on iMX8DXL phantom MEK board.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Sandor Yu [Thu, 7 Nov 2019 10:15:37 +0000 (18:15 +0800)]
arm: dts: imx6dl: dcic2: Add dcic1 clock to dcic2 property
dcic2 depend in dcic1 clock, add the clock to dcic2 to avoid
dcic2 hang.
Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Haibo Chen [Wed, 6 Nov 2019 07:07:28 +0000 (15:07 +0800)]
MLK-22912 ARM64: dts: add synaptics_dsx touch support for imx8mn/imx8mq
Enable the synaptics_dsx touch support when use rm67191 screen.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:37:08 +0000 (18:37 -0600)]
arm: dts: add gpmi weim dts for imx6ulz
add gpmi weim dts for imx6ulz 14x14 evk
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:36:11 +0000 (18:36 -0600)]
arm: dts: add gpmi weim dts for imx6ull
add gpmi weim dts for imx6ull 14x14 evk
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:30:03 +0000 (18:30 -0600)]
arm: dts: add gpmi weim dts for imx6ul
add gpmi weim dts for imx6ul
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:28:48 +0000 (18:28 -0600)]
arm: dts: add both ecspi and ecspi slave dts for imx6ul
add both ecspi and ecspi slave dts for imx6ul 14x14 evk
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:27:18 +0000 (18:27 -0600)]
arm: dts: add gpmi weim dts for imx6qp sabreauto
add gpmi weim dts for imx6qp sabreauto
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:26:18 +0000 (18:26 -0600)]
arm: dts: add ecspi dts for imx6qp sabreauto
add ecspi dts for imx6qp sabreauto
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:23:39 +0000 (18:23 -0600)]
arm: dts: add gpmi weim dts for imx6q sabreauto
add gpmi weim dts for imx6q sabreauto
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:22:46 +0000 (18:22 -0600)]
arm: dts: add ecspi dts for imx6q sabreauto
add ecspi dts for imx6q sabreauto
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:21:19 +0000 (18:21 -0600)]
arm: dts: add gpmi weim dts for imx6dl sabreatuo
add gpmi weim dts for imx6dl sabreatuo
Signed-off-by: Han Xu <han.xu@nxp.com>
Han Xu [Thu, 7 Nov 2019 00:20:06 +0000 (18:20 -0600)]
arm: dts: add ecspi dts for imx6dl sabreauto
add ecspi dts for imx6dl sabreauto
Signed-off-by: Han Xu <han.xu@nxp.com>
Silvano di Ninno [Wed, 6 Nov 2019 15:56:48 +0000 (16:56 +0100)]
arm:dts:imx: dropping leading 0s on ocram nodes
removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Signed-off-by: Silvano di Ninno <silvano.dininno@nxp.com>
Clement Faure [Fri, 13 Apr 2018 09:11:36 +0000 (11:11 +0200)]
MLK-18036-1 Add "fsl,optee-lpm-sram" node for optee os power management.
This node will be used by the OCRAM driver in optee to:
* Get the OCRAM start address for power management in optee.
* Add an entry that will overwrite ocrams nodes and dynamically reduce
the OCRAM available for mmio-sram in Linux.
That way we do not touch the legacy Linux boot and remove the dedicated
optee device tree.
Signed-off-by: Clement Faure <clement.faure@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
[Arul: Fix merge conflicts]
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Shengjiu Wang [Wed, 6 Nov 2019 08:32:46 +0000 (16:32 +0800)]
MLK-22484: arm64: dts: Fix mem clock for asrc
The mem clock is used to access the register, if there is no
mem clock defined, we should use the ipg clock instead,
otherwise there will be kernel dump after system reboot.
[ 3.010962] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 3.010964] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
4.19.35-05057-g2134d856e6b2 #2889
[ 3.010966] Hardware name: Freescale i.MX8QXP MEK (DT)
[ 3.010968] Call trace:
[ 3.010969] dump_backtrace+0x0/0x178
[ 3.010971] show_stack+0x14/0x20
[ 3.010972] dump_stack+0x8c/0xac
[ 3.010974] panic+0x120/0x28c
[ 3.010975] __stack_chk_fail+0x0/0x18
[ 3.010977] arm64_serror_panic+0x74/0x80
[ 3.010979] do_serror+0x68/0x130
[ 3.010980] el1_error+0x7c/0xdc
[ 3.010982] _raw_spin_unlock_irqrestore+0xc/0x48
[ 3.010984] clk_core_disable_lock+0x28/0x38
[ 3.010985] clk_disable+0x1c/0x30
[ 3.010987] regmap_mmio_write+0x54/0x68
[ 3.010989] _regmap_bus_reg_write+0x14/0x20
[ 3.010990] _regmap_write+0x60/0xa8
[ 3.010992] regmap_write+0x48/0x70
[ 3.010994] fsl_asrc_probe+0x258/0x660
[ 3.010995] platform_drv_probe+0x50/0xb0
Why this issue only happen at kernel reboot, it is because the ipg
clock is enabled in default after system reset, after used once, the
ipg clock is disabled, then reboot system, the issue happen.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 07:17:02 +0000 (15:17 +0800)]
arm64: dts: freescale: Add i.MX8DM LPDDR4 validation board support
Add i.MX8DM validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 06:54:56 +0000 (14:54 +0800)]
arm64: dts: freescale: Add i.MX8DX 17x17 validation board support
Add i.MX8DX 17x17 validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 06:36:58 +0000 (14:36 +0800)]
arm64: dts: freescale: Add i.MX8QP LPDDR4 validation board support
Add i.MX8QP LPDDR4 validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 06:13:54 +0000 (14:13 +0800)]
arm64: dts: freescale: Add i.MX8QM DDR4 validation board support
Add i.MX8QM DDR4 validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 05:57:08 +0000 (13:57 +0800)]
arm64: dts: freescale: Add i.MX8DX LPDDR4 validation board support
Add i.MX8DX LPDDR4 validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 05:44:23 +0000 (13:44 +0800)]
arm64: dts: freescale: Add i.MX8QXP 17x17 validation board support
Add i.MX8QXP 17x17 Validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 05:40:03 +0000 (13:40 +0800)]
arm64: dts: freescale: Add i.MX8DXP LPDDR4 validation board support
Add i.MX8DXP LPDDR4 validation board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 02:33:51 +0000 (10:33 +0800)]
arm64: dts: imx8qm: Add LPDDR4 validation board single cluster support
Add *-ca53.dtb and *-ca72.dtb to support booting up single
cluster on LPDDR4 validation board, to boot up single A72 cluster,
dedicated flash.bin needs to be used.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 01:50:10 +0000 (09:50 +0800)]
arm64: dts: imx8qxp: Add DDR3L validation board support
Add i.MX8QXP DDR3L validation board support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 01:43:14 +0000 (09:43 +0800)]
arm64: dts: imx8qxp: Add MEK/VAL board with A0 chip support
Add i.MX8QXP MEK/VAL board with A0 chip support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Wed, 6 Nov 2019 01:39:50 +0000 (09:39 +0800)]
ARM: dts: imx6sll: Add EVK Rev-A board support
Add i.MX6SLL EVK Rev-A board DT support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fugang Duan [Tue, 5 Nov 2019 12:24:09 +0000 (20:24 +0800)]
ARM: dts: imx6: enable Murata 1MW M.2 card for imx6 legacy platforms
Enable Murata 1MW M.2 card for i.MX6 legacy platforms. Plug in
Murata 1MW M.2 into SD slot by using Murata uSD-to-M.2 Adapter.
Below i.MX6 legacy platforms will be supported:
- i.MX6Q/QP/DL SDB, SD2 slot
- i.MX6SX SDB, SD2 slot
- i.MX6SLL EVK, SD3 slot
- i.MX6UL/ULL/ULZ EVK, SD1 slot
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Tue, 5 Nov 2019 11:40:51 +0000 (19:40 +0800)]
MLK-18675-23 ARM: dts: imx7d-sdb: add wifi bcm4339 support with fmac driver
Add wifi bcm4339 support with fmac driver.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
[Arul: Fix merge conflicts]
Signed-off-by: Arulpandiyan Vadivel <arulpandiyan_vadivel@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Fugang Duan [Tue, 5 Nov 2019 06:30:06 +0000 (14:30 +0800)]
arm64: dts: imx8mq-evk: enable pcie wireless
Enable 32Khz for cypress cyw4356/cyw4359 and Marvell 88w8997.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Mon, 4 Nov 2019 09:51:44 +0000 (17:51 +0800)]
MLK-20685-05 arm64: dts: imx8qm/qxp: add cyw4356 and cyw4359 support
Add cyw4356 and cyw4359 support on imx8qm MEK boards..
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fugang Duan [Sat, 2 Nov 2019 10:17:25 +0000 (18:17 +0800)]
arm64: dts: imx8qxp-mek: enable pcie wireless
Enable pcie wireless for M.2 interface.
That support cypress and marvell pcie wlan.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Fancy Fang [Mon, 4 Nov 2019 03:47:06 +0000 (11:47 +0800)]
arm64: dts: imx8mm: rename apb clock names for dispmix reset
Rename the apb clock names from 'apb-clk' to 'disp_apb_root_clk'
for dispmix reset nodes, since in commit
f541de184245(reset: imx8m:
Correct clock name for dispmix driver), it changes the apb clock
name.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Fancy Fang [Sat, 2 Nov 2019 09:05:41 +0000 (17:05 +0800)]
arm64: dts: imx8mm: Define resets for LCDIF and DSIM
The dispmix-reset device can be used to control the LCDIF and
DSIM bus reset and clock enable. So define 'resets' property
for both LCDIF and DSIM for this purpose which will be used to
replace 'dispmix_gpr' usage.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Fancy Fang [Fri, 1 Nov 2019 13:15:11 +0000 (21:15 +0800)]
arm64: dts: imx8mm: Add 'dispmix-reset' device
Create a new device node 'dispmix-reset' to describe the
reset controller in DISPMIX to control several submodules
bus and clock reset and enable. All the reset lines can be
divided into three groups: sft_rstn, clk_en and mipi_rst.
Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Anson Huang [Mon, 4 Nov 2019 03:26:09 +0000 (11:26 +0800)]
arm64: dts: imx8qxp: Add CPU cooling support
Add CPU cooling support for i.MX8QXP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[ Aisheng: remove unneeded imx8qxp.dtsi change ]
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Anson Huang [Mon, 4 Nov 2019 02:35:29 +0000 (10:35 +0800)]
arm64: dts: imx8qm: Update thermal zone number to support PMIC thermal zone
Update thermal zone number to 6 to support PMIC thermal zone.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Fri, 1 Nov 2019 08:52:22 +0000 (16:52 +0800)]
arm64: dts: freescale: Add i.MX8DXL phantom mek board
Add i.MX8DXL phantom mek board DT.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Shengjiu Wang [Fri, 1 Nov 2019 05:29:03 +0000 (13:29 +0800)]
arm64: dts: imx8qm: Disable dsp lpcg clock
There is no LPCG clock defined for DSP in imx8qm, so disable
dsp lpcg clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Anson Huang [Thu, 31 Oct 2019 09:34:50 +0000 (17:34 +0800)]
arm64: dts: imx8qm: Add A72 cluster cpufreq support
Add A72 cluster OPP table to support cpufreq.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Thu, 31 Oct 2019 10:24:00 +0000 (18:24 +0800)]
arm64: dts: imx8qm: Add support for booting up single cluster
Add *-ca53.dtb and *-ca72.dtb to support booting up single
cluster, to boot up single A72 cluster, dedicated flash.bin
needs to be used.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Thu, 31 Oct 2019 06:03:27 +0000 (14:03 +0800)]
arm64: dts: imx8qm-mek.dts: Enable A72 cluster by default
Enable A72 cluster by default to support 6 CPUs totally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Thu, 31 Oct 2019 06:02:05 +0000 (14:02 +0800)]
arm64: dts: imx8qm-lpddr4-val.dts: Enable A72 cluster by default
Enable A72 cluster by default.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Anson Huang [Thu, 31 Oct 2019 06:01:14 +0000 (14:01 +0800)]
arm64: dts: imx8qm: Add A72 cluster thermal zone
Add A72 cluster thermal zone support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Shijie Qin [Wed, 16 Oct 2019 01:54:14 +0000 (09:54 +0800)]
arm64: dts: imx8qm imx8qxp: enable mailbox for vpu
- The mailbox of mu_m0 is used by vpu decoder
- The mailbox of mu1_m0 and mu2_m0 are used by vpu encoder
mu2_m0 only enabled on imx8qm
Signed-off-by: Shijie Qin <shijie.qin@nxp.com>
projects / linux.git / log