From: Uwe Kleine-König Date: Mon, 17 Dec 2018 08:43:13 +0000 (+0100) Subject: gpio: mvebu: only fail on missing clk if pwm is actually to be used X-Git-Tag: rel_imx_4.19.35_1.1.0~7391 X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=ae247d60588c1e29f05d8b4861e85e59da7d6ae3;p=linux.git gpio: mvebu: only fail on missing clk if pwm is actually to be used [ Upstream commit c8da642d41a6811c21177c9994aa7dc35be67d46 ] The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm registers. So there is no need for a clk as the pwm isn't used anyhow. So only check for the clk in the presence of the pwm registers. This fixes a failure to probe the gpio driver for the above mentioned gpio device. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König Reviewed-by: Gregory CLEMENT Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 6e02148c208b..adc768f908f1 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -773,9 +773,6 @@ static int mvebu_pwm_probe(struct platform_device *pdev, "marvell,armada-370-gpio")) return 0; - if (IS_ERR(mvchip->clk)) - return PTR_ERR(mvchip->clk); - /* * There are only two sets of PWM configuration registers for * all the GPIO lines on those SoCs which this driver reserves @@ -786,6 +783,9 @@ static int mvebu_pwm_probe(struct platform_device *pdev, if (!res) return 0; + if (IS_ERR(mvchip->clk)) + return PTR_ERR(mvchip->clk); + /* * Use set A for lines of GPIO chip with id 0, B for GPIO chip * with id 1. Don't allow further GPIO chips to be used for PWM.