From: Yoshihiro Kaneko Date: Mon, 22 Jul 2019 17:23:08 +0000 (+0900) Subject: arm64: dts: renesas: r8a7795: salvator-xs: Sort nodes X-Git-Tag: rel_imx_5.10.35_2.0.0-somdevices.0~3890^2~34^2~5 X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=a23bc44c2deaf659c565b522bed6e78ce573a16d;p=linux.git arm64: dts: renesas: r8a7795: salvator-xs: Sort nodes Sort nodes. If node address is present * Sort by node address, grouping all nodes with the same compat string and sorting the group alphabetically. Else * Sort alphabetically This should not have any run-time effect. Signed-off-by: Yoshihiro Kaneko Reviewed-by: Simon Horman Signed-off-by: Geert Uytterhoeven --- diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 42101fc76837..36667c81d43d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -57,17 +57,6 @@ status = "okay"; }; -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -114,6 +103,11 @@ remote-endpoint = <&rcar_dw_hdmi1_out>; }; +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + &ohci2 { status = "okay"; }; @@ -123,36 +117,6 @@ status = "okay"; }; -&rcar_sound { - ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - &pca9654 { pcie_sata_switch { gpio-hog; @@ -186,11 +150,47 @@ }; }; +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default";