From: Takeshi Saito <takeshi.saito.xv@renesas.com>
Date: Thu, 21 Feb 2019 19:38:05 +0000 (+0100)
Subject: mmc: tmio: fix access width of Block Count Register
X-Git-Tag: rel_imx_4.19.35_1.1.0~6182
X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=85d9ad404676f2689e0c980f686cef9ca0a0aa63;p=linux.git

mmc: tmio: fix access width of Block Count Register

commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream.

In R-Car Gen2 or later, the maximum number of transfer blocks are
changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register
should use iowrite32().

If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this
value will not be cleared. So, SD/MMC card initialization fails.

So, check for the bigger register and use apropriate write. Also, mark
the register as extended on Gen2.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[wsa: use max_blk_count in if(), add Gen2, update commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@kernel.org
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
[Ulf: Fixed build error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 5389c4821882..c3d63edb545e 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -68,6 +68,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
 	.scc_offset	= 0x0300,
 	.taps		= rcar_gen2_scc_taps,
 	.taps_num	= ARRAY_SIZE(rcar_gen2_scc_taps),
+	.max_blk_count  = 0xffffffff,
 };
 
 /* Definitions for sampling clocks */
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 5d141f79e175..7c40a7e1fea1 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -279,6 +279,11 @@ static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host,
 	iowrite16(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
 }
 
+static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
+{
+	iowrite32(val, host->ctl + (addr << host->bus_shift));
+}
+
 static inline void sd_ctrl_write32_rep(struct tmio_mmc_host *host, int addr,
 				       const u32 *buf, int count)
 {
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index dccd899b3671..7d13ca9ea534 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -46,6 +46,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/mmc/sdio.h>
 #include <linux/scatterlist.h>
+#include <linux/sizes.h>
 #include <linux/spinlock.h>
 #include <linux/swiotlb.h>
 #include <linux/workqueue.h>
@@ -777,7 +778,10 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 
 	/* Set transfer length / blocksize */
 	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
-	sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
+	if (host->mmc->max_blk_count >= SZ_64K)
+		sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks);
+	else
+		sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks);
 
 	tmio_mmc_start_dma(host, data);