From: Linus Walleij Date: Mon, 12 Feb 2018 21:40:23 +0000 (+0100) Subject: gpio: ftgpio010: Fix some more registers X-Git-Tag: rel_imx_4.19.35_1.1.0~10397^2~70 X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=69a87f290b46228c2ff1cc942326a90c468a2a68;p=linux.git gpio: ftgpio010: Fix some more registers There is a register for "bypass" which seems to not be used for anything in some silicon designs, but may be used in others, and there is both a raw and masked interrupt status register. Define them all for clarity, no semantic changes. Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c index b7a3a2db699b..e80634c464a9 100644 --- a/drivers/gpio/gpio-ftgpio010.c +++ b/drivers/gpio/gpio-ftgpio010.c @@ -21,12 +21,14 @@ #define GPIO_DATA_OUT 0x00 #define GPIO_DATA_IN 0x04 #define GPIO_DIR 0x08 +#define GPIO_BYPASS_IN 0x0C #define GPIO_DATA_SET 0x10 #define GPIO_DATA_CLR 0x14 #define GPIO_PULL_EN 0x18 #define GPIO_PULL_TYPE 0x1C #define GPIO_INT_EN 0x20 -#define GPIO_INT_STAT 0x24 +#define GPIO_INT_STAT_RAW 0x24 +#define GPIO_INT_STAT_MASKED 0x28 #define GPIO_INT_MASK 0x2C #define GPIO_INT_CLR 0x30 #define GPIO_INT_TYPE 0x34 @@ -147,7 +149,7 @@ static void ftgpio_gpio_irq_handler(struct irq_desc *desc) chained_irq_enter(irqchip, desc); - stat = readl(g->base + GPIO_INT_STAT); + stat = readl(g->base + GPIO_INT_STAT_RAW); if (stat) for_each_set_bit(offset, &stat, gc->ngpio) generic_handle_irq(irq_find_mapping(gc->irq.domain,