From: Jonathan Neuschäfer Date: Mon, 22 Jan 2018 05:04:09 +0000 (+0100) Subject: dt-bindings: gpio: Add binding for Wii GPIO controller X-Git-Tag: rel_imx_4.19.35_1.1.0~10397^2~72 X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=4760b6fa442276783aa4294e131b72fea8c5a18a;p=linux.git dt-bindings: gpio: Add binding for Wii GPIO controller The Nintendo Wii game console has a GPIO controller, which is used for the optical disk slot LED, buttons, poweroff, etc. This patch adds a binding for this GPIO controller. Signed-off-by: Jonathan Neuschäfer Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt new file mode 100644 index 000000000000..20fc72d9e61e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt @@ -0,0 +1,27 @@ +Nintendo Wii (Hollywood) GPIO controller + +Required properties: +- compatible: "nintendo,hollywood-gpio +- reg: Physical base address and length of the controller's registers. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be <2>. The first cell is the pin number and the + second cell is used to specify optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted). + +Optional properties: +- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- interrupts: Interrupt specifier for the controller's Broadway (PowerPC) + interrupt. +- interrupt-parent: phandle of the parent interrupt controller. + +Example: + + GPIO: gpio@d8000c0 { + #gpio-cells = <2>; + compatible = "nintendo,hollywood-gpio"; + reg = <0x0d8000c0 0x40>; + gpio-controller; + ngpios = <24>; + } diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 36afa322b04b..a3dc4b9fa11a 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -152,14 +152,7 @@ Nintendo Wii device tree 1.l) The General Purpose I/O (GPIO) controller node - Represents the dual access 32 GPIO controller interface. - - Required properties: - - - #gpio-cells : <2> - - compatible : should be "nintendo,hollywood-gpio" - - reg : should contain the IPC registers location and length - - gpio-controller + see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt 1.m) The control node