From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 25 Feb 2018 10:18:51 +0000 (+0100)
Subject: ARM: dtd: Set DNS-313 LEDs to use better triggers
X-Git-Tag: rel_imx_4.19.35_1.1.0~9906^2~44^2~5
X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=2bd2bbffb7d4f41564e5a894e435c0b4b668c5f5;p=linux.git

ARM: dtd: Set DNS-313 LEDs to use better triggers

We just used one LED for "disk activity" but using the green
LED for disk read and the red LED for disk write gives a way
better user experience.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 55b294f1675c..2d9aa5ba8320 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -59,14 +59,13 @@
 			label = "dns313:green:disk";
 			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			linux,default-trigger = "ide-disk";
-			/* Ideally should activate while reading */
+			linux,default-trigger = "disk-read";
 		};
 		led-disk-red {
 			label = "dns313:red:disk";
 			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
-			/* Ideally should activate while writing */
+			linux,default-trigger = "disk-write";
 		};
 	};