From: Stephan Gerhold Date: Tue, 15 Sep 2020 07:12:11 +0000 (+0200) Subject: arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts X-Git-Tag: rel_imx_5.10.35_2.0.0-somdevices.0~905^2~25^2~19 X-Git-Url: https://git.somdevices.com/?a=commitdiff_plain;h=027cca9eb5b450c3f6bb916ba999144c2ec23cb7;p=linux.git arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts The mdss node sets #interrupt-cells = <1>, so its interrupts should be referenced using a single cell (in this case: only the interrupt number). However, right now the mdp/dsi node both have two interrupt cells set, e.g. interrupts = <4 0>. The 0 is probably meant to say IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is actually interpreted as a second interrupt line. Remove the IRQ flags from both interrupts to fix this. Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support") Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200915071221.72895-5-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index d84118fb4403..1f9a24a2464e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1068,7 +1068,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 0>; + interrupts = <0>; clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, @@ -1100,7 +1100,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 0>; + interrupts = <4>; assigned-clocks = <&gcc BYTE0_CLK_SRC>, <&gcc PCLK0_CLK_SRC>;