arm64: dts: allwinner: h6: add USB2-related device nodes

Allwinner H6 has two USB2 ports, one OTG and one host-only.

Add device tree nodes related to them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 45bbb51..e28a0fc 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -345,6 +345,88 @@
                        };
                };
 
+               usb2otg: usb@5100000 {
+                       compatible = "allwinner,sun50i-h6-musb",
+                                    "allwinner,sun8i-a33-musb";
+                       reg = <0x05100000 0x0400>;
+                       clocks = <&ccu CLK_BUS_OTG>;
+                       resets = <&ccu RST_BUS_OTG>;
+                       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "mc";
+                       phys = <&usb2phy 0>;
+                       phy-names = "usb";
+                       extcon = <&usb2phy 0>;
+                       status = "disabled";
+               };
+
+               usb2phy: phy@5100400 {
+                       compatible = "allwinner,sun50i-h6-usb-phy";
+                       reg = <0x05100400 0x24>,
+                             <0x05101800 0x4>,
+                             <0x05311800 0x4>;
+                       reg-names = "phy_ctrl",
+                                   "pmu0",
+                                   "pmu3";
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY3>;
+                       clock-names = "usb0_phy",
+                                     "usb3_phy";
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY3>;
+                       reset-names = "usb0_reset",
+                                     "usb3_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ehci0: usb@5101000 {
+                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+                       reg = <0x05101000 0x100>;
+                       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_BUS_EHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>,
+                                <&ccu RST_BUS_EHCI0>;
+                       status = "disabled";
+               };
+
+               ohci0: usb@5101400 {
+                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+                       reg = <0x05101400 0x100>;
+                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>,
+                                <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>;
+                       status = "disabled";
+               };
+
+               ehci3: usb@5311000 {
+                       compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+                       reg = <0x05311000 0x100>;
+                       interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_BUS_EHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>,
+                                <&ccu RST_BUS_EHCI3>;
+                       phys = <&usb2phy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci3: usb@5311400 {
+                       compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+                       reg = <0x05311400 0x100>;
+                       interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_OHCI3>;
+                       phys = <&usb2phy 3>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
                hdmi: hdmi@6000000 {
                        compatible = "allwinner,sun50i-h6-dw-hdmi";
                        reg = <0x06000000 0x10000>;