MLK-22279-5 imx8mn_evk: Remove flexspi defconfig

Remove the defconfig for flexspi boot, we can use one defconfig
for both SD and flexspi.

Signed-off-by: Ye Li <ye.li@nxp.com>

diff --git a/configs/imx8mn_ddr4_evk_fspi_defconfig b/configs/imx8mn_ddr4_evk_fspi_defconfig
deleted file mode 100644 (file)
index a271048..0000000
--- a/configs/imx8mn_ddr4_evk_fspi_defconfig
+++ /dev/null
@@ -1,82 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8M=y
-CONFIG_SYS_TEXT_BASE=0x40200000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_USB_TCPC=y
-CONFIG_TARGET_IMX8MN_EVK=y
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_EXTERNAL_OFFSET=0x3000
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage.cfg,SPL_TEXT_BASE=0x912000"
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_HUSH_PARSER=y
-CONFIG_OF_LIBFDT=y
-CONFIG_FS_FAT=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8mn-ddr4-evk"
-CONFIG_DEFAULT_FDT_FILE="fsl-imx8mn-ddr4-evk.dtb"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_OF_CONTROL=y
-CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x42800000
-CONFIG_FASTBOOT_BUF_SIZE=0x40000000
-CONFIG_FASTBOOT_FLASH=y
-
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_MXC=y
-CONFIG_DM_MMC=y
-# CONFIG_DM_PMIC=y
-CONFIG_EFI_PARTITION=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_FSPI=y
-CONFIG_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SF_DEFAULT_BUS=0
-CONFIG_SF_DEFAULT_CS=0
-CONFIG_SF_DEFAULT_SPEED=40000000
-CONFIG_SF_DEFAULT_MODE=0
-
-CONFIG_DM_ETH=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX8M=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_NXP_TMU=y
-CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_GADGET=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-
-CONFIG_USB_GADGET_MANUFACTURER="FSL"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-
-CONFIG_VIDEO=y
-CONFIG_IMX_SEC_MIPI_DSI=y
-
-CONFIG_SPL_IMX_ROMAPI_SUPPORT=y
-CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000