arm64: dts: imx8mn-somdevices.dtsi: Disabled not used peripherals.

Signed-off-by: Josep Orga <jorga@somdevices.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-somdevices.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-somdevices.dtsi
index 31659db..cbd1250 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-somdevices.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-somdevices.dtsi
@@ -65,7 +65,7 @@
 };
 
 &cameradev {
-       status = "okay";
+       status = "disabled";
 };
 
 &easrc {
@@ -98,7 +98,7 @@
 &flexspi {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_flexspi0>;
-       status = "okay";
+       status = "disabled";
 };
 
 &gpu {
@@ -230,19 +230,19 @@
                compatible = "ovti,ov5640";
                reg = <0x3c>;
                pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_csi_pwn>, <&pinctrl_csi_rst>;
+               pinctrl-0 = <&pinctrl_csi>;
                clocks = <&clk IMX8MN_CLK_CLKO1>;
                clock-names = "xclk";
                assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
                assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
                assigned-clock-rates = <24000000>;
                csi_id = <0>;
-               powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-               reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+               //powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+               //reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
                mclk = <24000000>;
                mclk_source = <0>;
                mipi_csi;
-               status = "okay";
+               status = "disabled";
                port {
                        ov5640_ep: endpoint {
                                remote-endpoint = <&mipi1_sensor_ep>;
@@ -254,10 +254,10 @@
 };
 
 &isi_0 {
-       status = "okay";
+       status = "disabled";
 
        cap_device {
-               status = "okay";
+               status = "disabled";
        };
 };
 
@@ -278,7 +278,7 @@
 &mipi_csi_1 {
        #address-cells = <1>;
        #size-cells = <0>;
-       status = "okay";
+       status = "disabled";
        port@0 {
                reg = <0>;
                mipi1_sensor_ep: endpoint {
@@ -404,14 +404,9 @@
 };
 
 &iomuxc {
-       pinctrl_csi_pwn: csi_pwn_grp {
+       pinctrl_csi: csi_grp {
                fsl,pins = <
                        MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7               0x19
-               >;
-       };
-
-       pinctrl_csi_rst: csi_rst_grp {
-               fsl,pins = <
                        MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6               0x19
                        MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1      0x59
                >;