MLK-14897-3: clk: imx7d: Do not set rate for enet-axi in the ccm driver

Do not set rate for enet-axi in the ccm driver.
The device-tree set-rate attribute should be used instead.

Signed-off-by: Adriana Reus <adriana.reus@nxp.com>
Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index a7ba45f..f5a3344 100644 (file)
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -905,8 +905,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
        /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
        imx_clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
 
-       imx_clk_set_rate(clks[IMX7D_ENET_AXI_ROOT_CLK], 267000000);
-
        /* set pcie root's parent clk source */
        imx_clk_set_parent(clks[IMX7D_PCIE_CTRL_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_250M_CLK]);
        imx_clk_set_parent(clks[IMX7D_PCIE_PHY_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_100M_CLK]);