MLK-17278 imx8qxp_mek: Enable USB OTG port on base board

The USB OTG port on MEK base board is not enabled at default, due to the default
design connects it to M2 connector for BT/WIFI.
Since most boards have reworked it, we enable it to support both host and device
mode in u-boot.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 9a4f808..ade0621 100644 (file)
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -21,19 +21,19 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_IMX8=y
 
 CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 
 CONFIG_CMD_USB=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 
-
-# CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_USB_GADGET=y
-# CONFIG_CI_UDC=y
-# CONFIG_USB_GADGET_DOWNLOAD=y
-# CONFIG_G_DNL_MANUFACTURER="FSL"
-# CONFIG_G_DNL_VENDOR_NUM=0x0525
-# CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 
 CONFIG_CMD_GPIO=y
 CONFIG_DM_GPIO=y

diff --git a/configs/imx8qxp_mek_fspi_defconfig b/configs/imx8qxp_mek_fspi_defconfig
index de940c7..5aff415 100644 (file)
--- a/configs/imx8qxp_mek_fspi_defconfig
+++ b/configs/imx8qxp_mek_fspi_defconfig
@@ -21,19 +21,19 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_IMX8=y
 
 CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 
 CONFIG_CMD_USB=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 
-
-# CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_USB_GADGET=y
-# CONFIG_CI_UDC=y
-# CONFIG_USB_GADGET_DOWNLOAD=y
-# CONFIG_G_DNL_MANUFACTURER="FSL"
-# CONFIG_G_DNL_VENDOR_NUM=0x0525
-# CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
 
 CONFIG_CMD_GPIO=y
 CONFIG_DM_GPIO=y