MLK-21257-4: arm64: dts: change compatible string for i2c node of mipi csi

Because "fsl,imx8qm-lpi2c" was remove from of_device_id structure in
i2c-imx-lpi2c.c driver, so add "fsl,imx7ulp-lpi2c" in compatible string
of i2c node.

Signed-off-by: Guoniu.Zhou <guoniu.zhou@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8dx.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8dx.dtsi
index b2041d7..81ccc44 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-imx8dx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-imx8dx.dtsi
@@ -1465,7 +1465,7 @@
        };
 
        i2c0_csi0: i2c@58226000 {
-               compatible = "fsl,imx8qm-lpi2c";
+               compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
                reg = <0x0 0x58226000 0x0 0x1000>;
                interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-parent = <&irqsteer_csi>;
@@ -1499,7 +1499,7 @@
        };
 
        i2c0_cm40: i2c@37230000 {
-               compatible = "fsl,imx8qm-lpi2c";
+               compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
                reg = <0x0 0x37230000 0x0 0x1000>;
                interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-parent = <&intmux_cm40>;

diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qm-device.dtsi b/arch/arm64/boot/dts/freescale/fsl-imx8qm-device.dtsi
index 0e4e5ab..8927e06 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-imx8qm-device.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-imx8qm-device.dtsi
@@ -2966,7 +2966,7 @@
        };
 
        i2c0_mipi_csi0: i2c@58226000 {
-               compatible = "fsl,imx8qm-lpi2c";
+               compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
                reg = <0x0 0x58226000 0x0 0x1000>;
                interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-parent = <&irqsteer_csi0>;
@@ -2992,7 +2992,7 @@
        };
 
        i2c0_mipi_csi1: i2c@58246000 {
-               compatible = "fsl,imx8qm-lpi2c";
+               compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
                reg = <0x0 0x58246000 0x0 0x1000>;
                interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-parent = <&irqsteer_csi1>;