MLK-10483: ARM: dts: add gpmi weim support for imx6qp

dts for gpmi nand and weim nor support for imx6qp sabreauto

Signed-off-by: Han Xu <b45815@freescale.com>
(cherry picked and merge from commit adb9c42a8be0bd148069540b089d2e762bec05e9)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 042a8d4..781c4d0 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -397,7 +397,6 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-sabreauto.dtb \
        imx6q-sabreauto-ecspi.dtb \
        imx6q-sabreauto-gpmi-weim.dtb \
-       imx6qp-sabreauto.dtb \
        imx6q-sabrelite.dtb \
        imx6q-sabresd.dtb \
        imx6q-sabresd-btwifi.dtb \
@@ -420,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-wandboard-revb1.dtb \
        imx6qp-nitrogen6_max.dtb \
        imx6qp-sabreauto.dtb \
+       imx6qp-sabreauto-gpmi-weim.dtb \
        imx6qp-sabresd.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
        imx6sl-evk.dtb \

diff --git a/arch/arm/boot/dts/imx6qp-sabreauto-gpmi-weim.dts b/arch/arm/boot/dts/imx6qp-sabreauto-gpmi-weim.dts
new file mode 100644 (file)
index 0000000..9830f79
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto-gpmi-weim.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6qp-sabreauto.dts"
+
+&ecspi1 {
+       /* pin conflict with weim */
+       status = "disabled";
+};
+
+/* remove #if 0 after flexcan is ready */
+#if 0
+&flexcan2 {
+       /* max7310_c on i2c3 is gone */
+       status = "disabled";
+};
+#endif
+
+&gpmi {
+       status = "okay";
+};
+
+&i2c3 {
+       /* pin conflict with weim */
+       status = "disabled";
+};
+
+&uart3 {
+       /* pin conflict with gpmi and weim */
+       status = "disabled";
+};
+
+&usbh1 {
+       /* max7310_b on i2c3 is gone */
+       status = "disabled";
+};
+
+&usbotg {
+       /* max7310_c on i2c3 is gone */
+       status = "okay";
+       dr_mode = "peripheral";
+};
+
+&weim {
+       pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};