*/
timeout_ms = jiffies + msecs_to_jiffies(timeout_ms) + 1;
do {
- ret = nand_read_data_op(chip, &status, sizeof(status), true);
+ ret = nand_read_data_op(chip, &status, sizeof(status), true,
+ false);
if (ret)
break;
u8 status;
ret = nand_read_data_op(chip, &status, sizeof(status),
- true);
+ true, false);
if (ret)
return;
* @buf: buffer used to store the data
* @len: length of the buffer
* @force_8bit: force 8-bit bus access
+ * @check_only: do not actually run the command, only checks if the
+ * controller driver supports it
*
* This function does a raw data read on the bus. Usually used after launching
* another NAND operation like nand_read_page_op().
* Returns 0 on success, a negative error code otherwise.
*/
int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len,
- bool force_8bit)
+ bool force_8bit, bool check_only)
{
if (!len || !buf)
return -EINVAL;
instrs[0].ctx.data.force_8bit = force_8bit;
+ if (check_only)
+ return nand_check_op(chip, &op);
+
return nand_exec_op(chip, &op);
}
+ if (check_only)
+ return 0;
+
if (force_8bit) {
u8 *p = buf;
unsigned int i;
if (oob_required) {
ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize,
- false);
+ false, false);
if (ret)
return ret;
}
return ret;
for (steps = chip->ecc.steps; steps > 0; steps--) {
- ret = nand_read_data_op(chip, buf, eccsize, false);
+ ret = nand_read_data_op(chip, buf, eccsize, false, false);
if (ret)
return ret;
if (chip->ecc.prepad) {
ret = nand_read_data_op(chip, oob, chip->ecc.prepad,
- false);
+ false, false);
if (ret)
return ret;
oob += chip->ecc.prepad;
}
- ret = nand_read_data_op(chip, oob, eccbytes, false);
+ ret = nand_read_data_op(chip, oob, eccbytes, false, false);
if (ret)
return ret;
if (chip->ecc.postpad) {
ret = nand_read_data_op(chip, oob, chip->ecc.postpad,
- false);
+ false, false);
if (ret)
return ret;
size = mtd->oobsize - (oob - chip->oob_poi);
if (size) {
- ret = nand_read_data_op(chip, oob, size, false);
+ ret = nand_read_data_op(chip, oob, size, false, false);
if (ret)
return ret;
}
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(chip, NAND_ECC_READ);
- ret = nand_read_data_op(chip, p, eccsize, false);
+ ret = nand_read_data_op(chip, p, eccsize, false, false);
if (ret)
return ret;
chip->ecc.calculate(chip, p, &ecc_calc[i]);
}
- ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false);
+ ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false,
+ false);
if (ret)
return ret;
chip->ecc.hwctl(chip, NAND_ECC_READ);
- ret = nand_read_data_op(chip, p, eccsize, false);
+ ret = nand_read_data_op(chip, p, eccsize, false, false);
if (ret)
return ret;
chip->ecc.hwctl(chip, NAND_ECC_READ);
- ret = nand_read_data_op(chip, p, eccsize, false);
+ ret = nand_read_data_op(chip, p, eccsize, false, false);
if (ret)
return ret;
if (chip->ecc.prepad) {
ret = nand_read_data_op(chip, oob, chip->ecc.prepad,
- false);
+ false, false);
if (ret)
return ret;
chip->ecc.hwctl(chip, NAND_ECC_READSYN);
- ret = nand_read_data_op(chip, oob, eccbytes, false);
+ ret = nand_read_data_op(chip, oob, eccbytes, false, false);
if (ret)
return ret;
if (chip->ecc.postpad) {
ret = nand_read_data_op(chip, oob, chip->ecc.postpad,
- false);
+ false, false);
if (ret)
return ret;
/* Calculate remaining oob bytes */
i = mtd->oobsize - (oob - chip->oob_poi);
if (i) {
- ret = nand_read_data_op(chip, oob, i, false);
+ ret = nand_read_data_op(chip, oob, i, false, false);
if (ret)
return ret;
}
sndrnd = 1;
toread = min_t(int, length, chunk);
- ret = nand_read_data_op(chip, bufpoi, toread, false);
+ ret = nand_read_data_op(chip, bufpoi, toread, false, false);
if (ret)
return ret;
length -= toread;
}
if (length > 0) {
- ret = nand_read_data_op(chip, bufpoi, length, false);
+ ret = nand_read_data_op(chip, bufpoi, length, false, false);
if (ret)
return ret;
}