LF-1189-15 arm64: imx8qxp-mek: Add Seiko WVGA LCD panel(driven by DPU) support

This patch adds Seiko WVGA LCD panel support on the i.MX8qxp mek platform.
The panel is driven by DPU in DC0 subsystem.

Reviewed-by: Robert Chiras <robert.chiras@nxp.com>
Tested-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2a3b86f..8ab94e6 100644 (file)
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb imx8qxp-mek-dsp.dtb imx8qxp-mek-ov5640
                          imx8qxp-mek-jdi-wuxga-lvds0-panel.dtb \
                          imx8qxp-mek-jdi-wuxga-lvds1-panel.dtb \
                          imx8qxp-mek-dsi-rm67191.dtb \
+                         imx8qxp-mek-dpu-lcdif.dtb \
                          imx8qxp-lpddr4-val-a0.dtb \
                          imx8qxp-lpddr4-val.dtb imx8qxp-lpddr4-val-mqs.dtb imx8qxp-ddr3l-val.dtb \
                          imx8qxp-lpddr4-val-lpspi.dtb imx8qxp-lpddr4-val-lpspi-slave.dtb \

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek-dpu-lcdif.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek-dpu-lcdif.dts
new file mode 100644 (file)
index 0000000..c8397bb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek-dpu-lcdif.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+#include "imx8qxp-mek-rpmsg.dts"
+
+/ {
+       panel {
+               compatible = "sii,43wvf1g";
+               backlight = <&lcdif_backlight>;
+               status = "okay";
+
+               port {
+                       lcd_panel_in: endpoint {
+                               remote-endpoint = <&lcd_display_out>;
+                       };
+               };
+       };
+
+       display@disp1 {
+               compatible = "fsl,imx-lcdif-mux-display";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_lcdif>;
+               clocks = <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_BYPASS>,
+                        <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_MISC0>;
+               clock-names = "bypass_div", "pixel";
+               assigned-clocks = <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_MISC0>;
+               assigned-clock-parents = <&clk IMX_SC_R_LCD_0 IMX_SC_PM_CLK_BYPASS>;
+               fsl,lcdif-mux-regs = <&lcdif_mux_regs>;
+               fsl,interface-pix-fmt = "rgb666";
+               power-domains = <&pd IMX_SC_R_LCD_0>;
+               status = "okay";
+
+               port@0 {
+                       reg = <0>;
+
+                       lcd_display_in: endpoint {
+                               remote-endpoint = <&dpu_disp1_lcdif>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+
+                       lcd_display_out: endpoint {
+                               remote-endpoint = <&lcd_panel_in>;
+                       };
+               };
+       };
+};
+
+&dpu_disp1_lcdif {
+       remote-endpoint = <&lcd_display_in>;
+};
+
+&iomuxc {
+       pinctrl_hog: hoggrp {
+               fsl,pins = <
+                       IMX8QXP_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD       0x40000000
+               >;
+       };
+};
+
+&sai1 {
+       status = "disabled";
+};
+
+&esai0 {
+       status = "disabled";
+};
+
+&lpuart1 {
+       status = "disabled";
+};