include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index b0f8615..0de7591 100644 (file)
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -40,6 +40,15 @@
 #define CONFIG_BAUDRATE                9600
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 2dfd231..d6e7082 100644 (file)
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -69,6 +69,15 @@
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 1bfcd37..24b25d9 100644 (file)
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -123,6 +123,15 @@
 #define        CFG_HZ          (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 0a2d7d7..efa0157 100644 (file)
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -41,6 +41,15 @@
 #define CONFIG_SYS_CLK_FREQ    33000000 /* external frequency to pll   */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 49a285c..d90351a 100644 (file)
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -161,6 +161,15 @@
 #define CONFIG_SERVERIP                192.168.2.16
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 5742db6..5470373 100644 (file)
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -62,6 +62,15 @@
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 3cd3511..5ba8f4a 100644 (file)
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -89,6 +89,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index d79dd76..dbf9422 100644 (file)
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -304,6 +304,15 @@
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 5681d43..6bdfa5d 100644 (file)
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -307,6 +307,15 @@
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index bdbc900..b29f368 100644 (file)
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -64,6 +64,15 @@
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 8346d8c..72acf5a 100644 (file)
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -42,6 +42,15 @@
 #define CONFIG_CONS_INDEX      1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 709ce5f..dd1decd 100644 (file)
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -114,6 +114,15 @@
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index 1401da3..dfadd2a 100644 (file)
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -150,6 +150,15 @@
 #define CFG_PROMPT              "=> "
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index 5bdf571..d7652fa 100644 (file)
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -126,6 +126,15 @@
 #define CONFIG_BAUDRATE                38400
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -207,7 +216,7 @@
 #define MTDIDS_DEFAULT         "nor0=rattler-0"
 #define MTDPARTS_DEFAULT       "mtdparts=rattler-0:-@1m(jffs2)"
 */
-#endif /* CFG_CMD_JFFS2 */
+#endif /* CONFIG_CMD_JFFS2 */
 
 #define CFG_MONITOR_BASE       TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)

diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index a5397c2..f2c3699 100644 (file)
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -339,6 +339,15 @@
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/SL8245.h b/include/configs/SL8245.h
index b8e5c7d..4d9d41b 100644 (file)
--- a/include/configs/SL8245.h
+++ b/include/configs/SL8245.h
@@ -54,6 +54,15 @@
 #define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index 588d345..05cef87 100644 (file)
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -94,6 +94,15 @@
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index efc500c..8f2a5ec 100644 (file)
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -147,6 +147,15 @@
 #define CFG_DISCOVER_PHY
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index d19c27e..5bbe3c5 100644 (file)
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -81,6 +81,15 @@
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index cbad484..a08451e 100644 (file)
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -52,6 +52,15 @@
 #define        CONFIG_TIMESTAMP                /* Print image info with timestamp */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index b0116e7..2b2ae01 100644 (file)
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -51,6 +51,15 @@
 #undef CONFIG_MONITOR_IS_IN_RAM                      /* no pre-loader required!!! ;-) */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
index 3d90efb..1c6a9ae 100644 (file)
--- a/include/configs/TB5200.h
+++ b/include/configs/TB5200.h
@@ -87,6 +87,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -408,8 +417,7 @@
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 73d25ea..7240ce1 100644 (file)
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -99,6 +99,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 598c1c6..63d77e2 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -147,6 +147,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -580,8 +589,7 @@
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index 05e2e9a..50f6752 100644 (file)
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -97,10 +97,6 @@
 /* enable I2C and select the hardware/software driver */
 #undef  CONFIG_HARD_I2C                        /* I2C with hardware support    */
 #define CONFIG_SOFT_I2C                1       /* I2C bit-banged               */
-#define ADD_CMD_I2C            CFG_CMD_I2C     | \
-                               CFG_CMD_DATE    |\
-                               CFG_CMD_DTT     |\
-                               CFG_CMD_EEPROM
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address  */
 #define CFG_I2C_SLAVE          0x7F
 
@@ -140,7 +136,6 @@
 #else
 #undef CONFIG_HARD_I2C
 #undef CONFIG_SOFT_I2C
-#define ADD_CMD_I2C            0
 #endif
 
 /*
@@ -295,6 +290,13 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
 
+#if CONFIG_I2C
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_DATE
+    #define CONFIG_CMD_DTT
+    #define CONFIG_CMD_EEPROM
+#endif
+
 
 /*
  * Miscellaneous configurable options
@@ -439,7 +441,7 @@
        WRITE_NAND(d, addr); \
 } while(0)
 
-#endif /* CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
 
 #define        CONFIG_PCI
 #ifdef CONFIG_PCI

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 684cb30..c3efb7b 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -315,6 +315,15 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_LOADS_ECHO              1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE          1       /* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index b17d5e3..d5ce3ba 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -358,6 +358,15 @@
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 19fdaf0..f36b729 100644 (file)
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -198,8 +198,7 @@
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200 }
 
 /*
- * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 2a1cb89..9edf790 100644 (file)
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -110,6 +110,15 @@
 #define CONFIG_USB_STORAGE
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index ab802a3..df6894f 100644 (file)
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -49,6 +49,15 @@
 #define CONFIG_INITRD_TAG       1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 3f2c32b..34f0ebd 100644 (file)
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -59,6 +59,15 @@
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index ebe634f..1405784 100644 (file)
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -137,6 +137,15 @@
 
 #endif
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index fd81096..fc177fb 100644 (file)
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -70,6 +70,15 @@
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index a5ce685..20d693f 100644 (file)
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -76,6 +76,15 @@
 #define CFG_DTT_HYSTERESIS     3
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h
index f786520..c1b3da8 100644 (file)
--- a/include/configs/WUH405.h
+++ b/include/configs/WUH405.h
@@ -61,6 +61,15 @@
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
index 4b8fbe6..611f5a6 100644 (file)
--- a/include/configs/XPEDITE1K.h
+++ b/include/configs/XPEDITE1K.h
@@ -183,6 +183,15 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_HAS_ETH3                1       /* add support for "eth3addr"   */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 07fab44..00c4ff0 100644 (file)
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -65,6 +65,15 @@
 #define CONFIG_TIMESTAMP                       /* Print image info with timestamp */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index fb5bc0f..7c1a5b9 100644 (file)
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -107,6 +107,15 @@
 #define CONFIG_BAUDRATE                38400
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */