arm64: dts: renesas: r8a774c0-cat874: Add uSD support

This patch adds uSD card support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index c545ce5..477a56b 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r8a774c0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
@@ -26,6 +27,29 @@
                /* first 128MB is reserved for secure area. */
                reg = <0x0 0x48000000 0x0 0x78000000>;
        };
+
+       vcc_sdhi0: regulator-vcc-sdhi0 {
+               compatible = "regulator-fixed";
+
+               regulator-name = "SDHI0 Vcc";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
+       vccq_sdhi0: regulator-vccq-sdhi0 {
+               compatible = "regulator-gpio";
+
+               regulator-name = "SDHI0 VccQ";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <3300000>;
+
+               gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+               gpios-states = <1>;
+               states = <3300000 1
+                         1800000 0>;
+       };
 };
 
 &extal_clk {
@@ -37,6 +61,18 @@
                groups = "scif2_data_a";
                function = "scif2";
        };
+
+       sdhi0_pins: sd0 {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <3300>;
+       };
+
+       sdhi0_pins_uhs: sd0_uhs {
+               groups = "sdhi0_data4", "sdhi0_ctrl";
+               function = "sdhi0";
+               power-source = <1800>;
+       };
 };
 
 &scif2 {
@@ -45,3 +81,17 @@
 
        status = "okay";
 };
+
+&sdhi0 {
+       pinctrl-0 = <&sdhi0_pins>;
+       pinctrl-1 = <&sdhi0_pins_uhs>;
+       pinctrl-names = "default", "state_uhs";
+
+       vmmc-supply = <&vcc_sdhi0>;
+       vqmmc-supply = <&vccq_sdhi0>;
+       cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+       bus-width = <4>;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
+       status = "okay";
+};