LF-497-3 arm: dts: imx6qdl-sabresd: enable mipi dsi

Enable mipi dsi for imx6q and imx6dl sabresd
boards by default.

Signed-off-by: Fancy Fang <chen.fang@nxp.com>
Reviewed-by: Robby Cai <robby.cai@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 6e7a9f1..20a496b 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -95,6 +95,13 @@
                hdmi-5v-supply = <&swbst_reg>;
     };
 
+       reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on {
+               compatible = "regulator-fixed";
+               regulator-name = "mipi_dsi_pwr_on";
+               gpio = <&gpio6 14 0>;
+               enable-active-high;
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
                pinctrl-names = "default";
@@ -284,6 +291,16 @@
 #endif
 };
 
+&mipi_dsi {
+        dev_id = <0>;
+        disp_id = <1>;
+        lcd_panel = "TRULY-WVGA";
+        disp-power-on-supply = <&reg_mipi_dsi_pwr_on>;
+        reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+        reset-delay-us = <50>;
+        status = "okay";
+};
+
 &audmux {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_audmux>;
@@ -685,6 +702,7 @@
                                MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
                                MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000
                                MX6QDL_PAD_GPIO_9__GPIO1_IO09  0x80000000
+                               MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
                        >;
                };