ARM: dts: sun5i: q8-tablet: Use bananapi,s070wv20-ct16 panel compatible

The compatible string for the LCD panel used for the Q8 tablets are just
a placeholder that was shown to be compatible with the actual panels
found on these devices. The real panels do not have any identifiable
markings and vary between production runs.

The compatibe string previously used had a pixel clock that could not
be accurately reproduced on Allwinner hardware, and discussions on
whether a margin should be added to the display drivers and how large
a margin was acceptable had stalled.

Now that we have a panel model that is actually used with Allwinner
hardware, has the same dimensions, and the timings have been shown to
work with the nameless panels, we can use that one instead.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index c77c075..7257f39 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -49,7 +49,7 @@
        compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
 
        panel: panel {
-               compatible = "urt,umsh-8596md-t", "simple-panel";
+               compatible = "bananapi,s070wv20-ct16", "simple-panel";
                power-supply = <&reg_vcc3v3>;
                enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
                backlight = <&backlight>;