MLK_23189 arm64: dts: imx8mp: add flexcan support

Add flexcan device node for i.MX8MP EVK board.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index b4e44a9..dbc857d 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -33,6 +33,28 @@
                      <0x1 0x00000000 0 0xc0000000>;
        };
 
+       reg_can1_stby: regulator-can1-stby {
+               compatible = "regulator-fixed";
+               regulator-name = "can1-stby";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_flexcan1_reg>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_can2_stby: regulator-can2-stby {
+               compatible = "regulator-fixed";
+               regulator-name = "can2-stby";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_flexcan2_reg>;
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
        reg_usdhc2_vmmc: regulator-usdhc2 {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
@@ -192,6 +214,21 @@
        };
 };
 
+&flexcan1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan1>;
+       xceiver-supply = <&reg_can1_stby>;
+       status = "okay";
+};
+
+&flexcan2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan2>;
+       xceiver-supply = <&reg_can2_stby>;
+       pinctrl-assert-gpios = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+       status = "disabled";/* can2 pin conflict with pdm: gpio low select pdm, gpio high select can2 */
+};
+
 &i2c1 {
        clock-frequency = <400000>;
        pinctrl-names = "default";
@@ -579,6 +616,32 @@
                >;
        };
 
+       pinctrl_flexcan1: flexcan1grp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
+                       MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
+               >;
+       };
+
+       pinctrl_flexcan2: flexcan2grp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+                       MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+               >;
+       };
+
+       pinctrl_flexcan1_reg: flexcan1reggrp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /* CAN1_STBY */
+               >;
+       };
+
+       pinctrl_flexcan2_reg: flexcan2reggrp {
+               fsl,pins = <
+                       MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
+               >;
+       };
+
        pinctrl_gpio_led: gpioledgrp {
                fsl,pins = <
                        MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16   0x19

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 821ebd4..bca131e 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -843,6 +843,36 @@
                                status = "disabled";
                        };
 
+                       flexcan1: can@308c0000 {
+                               compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+                               reg = <0x308c0000 0x10000>;
+                               interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+                                        <&clk IMX8MP_CLK_CAN1_ROOT>;
+                               clock-names = "ipg", "per";
+                               assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+                               assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+                               assigned-clock-rates = <40000000>;
+                               fsl,clk-source= <0>;
+                               fsl,stop-mode = <&gpr 0x10 4 0x10 20>;
+                               status = "disabled";
+                       };
+
+                       flexcan2: can@308d0000 {
+                               compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+                               reg = <0x308d0000 0x10000>;
+                               interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+                                        <&clk IMX8MP_CLK_CAN2_ROOT>;
+                               clock-names = "ipg", "per";
+                               assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+                               assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+                               assigned-clock-rates = <40000000>;
+                               fsl,clk-source= <0>;
+                               fsl,stop-mode = <&gpr 0x10 5 0x10 21>;
+                               status = "disabled";
+                       };
+
                        crypto: crypto@30900000 {
                                compatible = "fsl,sec-v4.0";
                                #address-cells = <1>;