MLK-22409 imx8qm_mek: Remove the spl defconfig

imx8qm_mek_spl_defconfig was wrongly added when porting android support
from 2018.03. Since we have enabled SPL building in imx8qm_mek_defconfig,
no need to keep this defconfig

Signed-off-by: Ye Li <ye.li@nxp.com>

diff --git a/configs/imx8qm_mek_spl_defconfig b/configs/imx8qm_mek_spl_defconfig
deleted file mode 100644 (file)
index 41650e2..0000000
--- a/configs/imx8qm_mek_spl_defconfig
+++ /dev/null
@@ -1,149 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_SYS_TEXT_BASE=0x80020000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_TARGET_IMX8QM_MEK=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_EFI_PARTITION=n
-CONFIG_SPL_DOS_PARTITION=n
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_USE_TINY_PRINTF=y
-CONFIG_SPL=y
-CONFIG_PANIC_HANG=y
-CONFIG_NR_DRAM_BANKS=4
-CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_LOG=y
-CONFIG_SPL_BOARD_INIT=y
-# CONFIG_SPL_SYS_MALLOC_SIMPLE is not set
-CONFIG_SPL_SEPARATE_BSS=y
-CONFIG_SPL_POWER_SUPPORT=y
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_CPU=y
-# CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_FAT=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_CLK=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_DM_GPIO=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_PCA953X=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_IO_VOLTAGE=y
-CONFIG_MMC_UHS_SUPPORT=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_EFI_PARTITION=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ADDR_ENABLE=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_DM_ETH=y
-CONFIG_PHY_GIGE=y
-CONFIG_FEC_MXC_SHARE_MDIO=y
-CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_FIXED=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set
-
-CONFIG_CMD_FUSE=y
-CONFIG_SMC_FUSE=y
-CONFIG_CMD_MEMTEST=y
-
-CONFIG_IMX_BOOTAUX=y
-
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SC_THERMAL=y
-
-CONFIG_VIDEO=y
-CONFIG_VIDEO_IMX_HDP_LOAD=y
-
-CONFIG_SPI=y
-CONFIG_FSL_FSPI=y
-CONFIG_DM_SPI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_CMD_SF=y
-CONFIG_SF_DEFAULT_BUS=0
-CONFIG_SF_DEFAULT_CS=0
-CONFIG_SF_DEFAULT_SPEED=40000000
-CONFIG_SF_DEFAULT_MODE=0
-
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_IMX8=y
-CONFIG_DM_USB=y
-CONFIG_DM_USB_GADGET=y
-CONFIG_SPL_DM_USB_GADGET=y
-CONFIG_USB=y
-CONFIG_USB_TCPC=y
-CONFIG_USB_GADGET=y
-# CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_GADGET_MANUFACTURER="FSL"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_CDNS3=y
-CONFIG_USB_CDNS3_GADGET=y
-CONFIG_USB_GADGET_DUALSPEED=y
-
-CONFIG_SPL_USB_GADGET=y
-CONFIG_SPL_USB_SDP_SUPPORT=y
-CONFIG_SPL_SDP_USB_DEV=1
-CONFIG_SDP_LOADADDR=0x80400000
-
-CONFIG_FASTBOOT=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_CMD_FASTBOOT=y
-CONFIG_ANDROID_BOOT_IMAGE=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82800000
-CONFIG_FASTBOOT_BUF_SIZE=0x40000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_USB_DEV=1
-
-CONFIG_BOOTAUX_RESERVED_MEM_BASE=0x88000000
-CONFIG_BOOTAUX_RESERVED_MEM_SIZE=0x08000000
-
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_USB_HOST_SUPPORT=y
-CONFIG_SPL_USB_GADGET_SUPPORT=y
-CONFIG_SPL_ENV_SUPPORT=y
-