dt-bindings: ad5272: Add bindings for Analog Devices digital potentiometers

Add binding documentation for Analog Devices AD5272 and AD5274 digital
potentiometer devices.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
new file mode 100644 (file)
index 0000000..f9b2eef
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt
@@ -0,0 +1,27 @@
+* Analog Devices AD5272 digital potentiometer
+
+The node for this device must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+       - compatible:   Must be one of the following, depending on the model:
+                       adi,ad5272-020
+                       adi,ad5272-050
+                       adi,ad5272-100
+                       adi,ad5274-020
+                       adi,ad5274-100
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+               active low signal to the AD5272.
+
+Example:
+ad5272: potentiometer@2f {
+       reg = <0x2F>;
+       compatible = "adi,ad5272-020";
+       reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+};