i2c: xiic: Service all interrupts in isr

Currently only one interrupt is serviced in the isr.
In case the multiple interrupts happen simultenously we service and ack
only one of them. Check for all the causes in the isr and service them.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 08dfb8c..987a18c 100644 (file)
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -401,11 +401,11 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 
                if (i2c->tx_msg)
                        xiic_wakeup(i2c, STATE_ERROR);
-
-       } else if (pend & XIIC_INTR_RX_FULL_MASK) {
+       }
+       if (pend & XIIC_INTR_RX_FULL_MASK) {
                /* Receive register/FIFO is full */
 
-               clr = XIIC_INTR_RX_FULL_MASK;
+               clr |= XIIC_INTR_RX_FULL_MASK;
                if (!i2c->rx_msg) {
                        dev_dbg(i2c->adap.dev.parent,
                                "%s unexpexted RX IRQ\n", __func__);
@@ -438,9 +438,10 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
                                __xiic_start_xfer(i2c);
                        }
                }
-       } else if (pend & XIIC_INTR_BNB_MASK) {
+       }
+       if (pend & XIIC_INTR_BNB_MASK) {
                /* IIC bus has transitioned to not busy */
-               clr = XIIC_INTR_BNB_MASK;
+               clr |= XIIC_INTR_BNB_MASK;
 
                /* The bus is not busy, disable BusNotBusy interrupt */
                xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
@@ -453,12 +454,12 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
                        xiic_wakeup(i2c, STATE_DONE);
                else
                        xiic_wakeup(i2c, STATE_ERROR);
-
-       } else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
+       }
+       if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
                /* Transmit register/FIFO is empty or ½ empty */
 
-               clr = pend &
-                       (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK);
+               clr |= (pend &
+                       (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK));
 
                if (!i2c->tx_msg) {
                        dev_dbg(i2c->adap.dev.parent,
@@ -489,11 +490,6 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
                         * make sure to disable tx half
                         */
                        xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
-       } else {
-               /* got IRQ which is not acked */
-               dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n",
-                       __func__);
-               clr = pend;
        }
 out:
        dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);