MLK-10497 ARM: dts: supported spi-nor on imx6qp sabreauto

add new dts to support spi-nor on imx6qp sabreauto

Signed-off-by: Han Xu <b45815@freescale.com>
(cherry picked and merge from commit edb500d09c08effce28f8c45490372f38b037815)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 421138b..52e292e 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -419,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-wandboard-revb1.dtb \
        imx6qp-nitrogen6_max.dtb \
        imx6qp-sabreauto.dtb \
+       imx6qp-sabreauto-ecspi.dtb \
        imx6qp-sabreauto-gpmi-weim.dtb \
        imx6qp-sabresd.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \

diff --git a/arch/arm/boot/dts/imx6qp-sabreauto-ecspi.dts b/arch/arm/boot/dts/imx6qp-sabreauto-ecspi.dts
new file mode 100644 (file)
index 0000000..ace6da9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto-ecspi.dts
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6qp-sabreauto.dts"
+
+&ecspi1 {
+       pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+/* remove #if 0 after flexcan is ready */
+#if 0
+&flexcan2 {
+       /* max7310_c on i2c3 is gone */
+       status = "disabled";
+};
+#endif
+
+&i2c3 {
+       /* pin conflict with ecspi1 */
+       status = "disabled";
+};
+
+&uart3 {
+       /* the uart3 depends on the i2c3, so disable it too. */
+       status = "disabled";
+};
+
+&usbh1 {
+       /* max7310_b on i2c3 is gone */
+       status = "disabled";
+};
+
+&usbotg {
+       /* max7310_c on i2c3 is gone */
+       status = "okay";
+       dr_mode = "peripheral";
+};