mmc: fsl_esdhc: add pulse width detection workaround

HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a
workaroung for the pulse width detection. Apply this workaround in
u-boot, too.

This will make HS400 mode work reliably on the LS1028A SoC.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f2dd436..b155440 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -48,6 +48,7 @@ config ARCH_LS1028A
        select SYS_FSL_ERRATUM_A009942 if !TFABOOT
        select SYS_FSL_ERRATUM_A050382
        select SYS_FSL_ERRATUM_A011334
+       select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
        select RESV_RAM if GIC_V3_ITS
        imply PANIC_HANG
 

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 0b6755f..f7620c9 100644 (file)
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -815,3 +815,6 @@ config SYS_FSL_ERRATUM_ESDHC_A001
 
 config SYS_FSL_ERRATUM_A011334
        bool
+
+config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
+       bool

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 09ea1a9..7501fdb 100644 (file)
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -71,7 +71,8 @@ struct fsl_esdhc {
        uint    sdtimingctl;    /* SD timing control register */
        char    reserved8[20];  /* reserved */
        uint    dllcfg0;        /* DLL config 0 register */
-       char    reserved9[12];  /* reserved */
+       uint    dllcfg1;        /* DLL config 1 register */
+       char    reserved9[8];   /* reserved */
        uint    dllstat0;       /* DLL status 0 register */
        char    reserved10[664];/* reserved */
        uint    esdhcctl;       /* eSDHC control register */
@@ -767,6 +768,9 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
        /* Set timout to the maximum value */
        esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 
+       if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND))
+               esdhc_clrbits32(&regs->dllcfg1, DLL_PD_PULSE_STRETCH_SEL);
+
        return 0;
 }
 

diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 850a304..f86afe5 100644 (file)
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -190,6 +190,9 @@
 #define DLL_RESET              0x40000000
 #define DLL_FREQ_SEL           0x08000000
 
+/* DLL config 1 register */
+#define DLL_PD_PULSE_STRETCH_SEL 0x80000000
+
 /* DLL status 0 register */
 #define DLL_STS_SLV_LOCK       0x08000000