MLK-15013-4 imx8qxp_arm2: Enable USB DM driver for USBOH controller

Add board codes and configurations to enable USB DM driver (host and gadget)
for the USBOH(OTG) controller on i.MX8QXP ARM2 board.

For device mode, the UMS (USB mass storage) is enabled at default.

Signed-off-by: Ye Li <ye.li@nxp.com>

diff --git a/board/freescale/imx8qxp_arm2/imx8qxp_arm2.c b/board/freescale/imx8qxp_arm2/imx8qxp_arm2.c
index 51e8baa..fc6af93 100644 (file)
--- a/board/freescale/imx8qxp_arm2/imx8qxp_arm2.c
+++ b/board/freescale/imx8qxp_arm2/imx8qxp_arm2.c
@@ -98,7 +98,7 @@ static iomux_cfg_t lpi2c3_pads[] = {
 };
 
 static iomux_cfg_t lpi2c1_pads[] = {
-       SC_P_USB_SS3_TC0 | MUX_MODE_ALT(0) | MUX_PAD_CTRL(I2C_PAD_CTRL),
+       SC_P_USB_SS3_TC1 | MUX_MODE_ALT(0) | MUX_PAD_CTRL(I2C_PAD_CTRL),
        SC_P_USB_SS3_TC3 | MUX_MODE_ALT(0) | MUX_PAD_CTRL(I2C_PAD_CTRL),
 };
 
@@ -564,6 +564,21 @@ void pci_init_board(void)
 
 #endif
 
+#ifdef CONFIG_USB_EHCI_MX6
+static iomux_cfg_t otg1_pins[] = {
+       /* Set USB PWR to GPIO used by DM driver */
+       SC_P_USB_SS3_TC0 | MUX_MODE_ALT(3) | MUX_PAD_CTRL(GPIO_PAD_CTRL),
+};
+
+static void setup_otg(void)
+{
+       imx8_iomux_setup_multiple_pads(otg1_pins, ARRAY_SIZE(otg1_pins));
+
+       /* Enable usb power */
+       init_otg_power();
+}
+#endif
+
 int board_init(void)
 {
 #ifdef CONFIG_MXC_GPIO
@@ -587,6 +602,10 @@ int board_init(void)
        setup_mmc();
 #endif
 
+#ifdef CONFIG_USB_EHCI_MX6
+       setup_otg();
+#endif
+
        return 0;
 }
 

diff --git a/configs/imx8qxp_lpddr4_arm2_defconfig b/configs/imx8qxp_lpddr4_arm2_defconfig
index dc99847..8bc5cb9 100644 (file)
--- a/configs/imx8qxp_lpddr4_arm2_defconfig
+++ b/configs/imx8qxp_lpddr4_arm2_defconfig
@@ -13,8 +13,21 @@ CONFIG_DM_I2C=y
 # CONFIG_DM_I2C_COMPAT is not set
 CONFIG_SYS_I2C_IMX_LPI2C=y
 CONFIG_CMD_I2C=y
-# CONFIG_CMD_USB is not set
-# CONFIG_USB is not set
+
+CONFIG_CMD_USB=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_G_DNL_MANUFACTURER="FSL"
+CONFIG_G_DNL_VENDOR_NUM=0x0525
+CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+
 CONFIG_CMD_GPIO=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_PCA953X=y
@@ -38,3 +51,7 @@ CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_DM_ETH=y
 # CONFIG_EFI_LOADER is not set
+
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y

diff --git a/include/configs/imx8qxp_arm2.h b/include/configs/imx8qxp_arm2.h
index f3e566e..0bb8ef8 100644 (file)
--- a/include/configs/imx8qxp_arm2.h
+++ b/include/configs/imx8qxp_arm2.h
@@ -252,4 +252,16 @@
 #define CONFIG_SYS_FSL_FSPI_AHB
 #endif
 
+/* USB OTG controller configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
+#endif
+
+#ifdef CONFIG_USB_GADGET
+#define CONFIG_USBD_HS
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#endif
+
 #endif /* __IMX8QXP_ARM2_H */