MLK-16608: configs: add flexspi config for imx8qm mek

add flexspi config for imx8qm mek board to support boot from octal nor
chip.

Reviewed-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Han Xu <han.xu@nxp.com>

diff --git a/configs/imx8qm_mek_fspi_defconfig b/configs/imx8qm_mek_fspi_defconfig
new file mode 100644 (file)
index 0000000..e9ca760
--- /dev/null
+++ b/configs/imx8qm_mek_fspi_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
+CONFIG_TARGET_IMX8QM_MEK=y
+CONFIG_CMD_IMPORTENV=n
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM=y
+CONFIG_CMD_CACHE=y
+
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_I2C=y
+# CONFIG_DM_I2C_COMPAT is not set
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_CMD_I2C=y
+
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_IMX8=y
+
+CONFIG_DM_USB=y
+
+CONFIG_CMD_USB=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+
+
+# CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_USB_GADGET=y
+# CONFIG_CI_UDC=y
+# CONFIG_USB_GADGET_DOWNLOAD=y
+# CONFIG_G_DNL_MANUFACTURER="FSL"
+# CONFIG_G_DNL_VENDOR_NUM=0x0525
+# CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
+
+CONFIG_CMD_GPIO=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_BOOTDELAY=3
+CONFIG_IMX_BOOTAUX=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MMC=y
+CONFIG_DM_MMC=y
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_QSPI_BOOT=y
+CONFIG_FSL_FSPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_4BYTES_ADDR=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_CMD_SF=y
+
+CONFIG_CMD_PING=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_DM_ETH=y
+# CONFIG_EFI_LOADER is not set
+
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+
+CONFIG_VIDEO=y
+
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SC_THERMAL=y