drm/tegra: Add tiling FB modifiers
authorAlexandre Courbot <acourbot@nvidia.com>
Tue, 8 Nov 2016 07:50:42 +0000 (16:50 +0900)
committerNitin Garg <nitin.garg@nxp.com>
Tue, 20 Mar 2018 19:50:21 +0000 (14:50 -0500)
Add FB modifiers to allow user-space to specify that a surface is in one
of the two tiling formats supported by Tegra chips, and add support in
the tegradrm driver to handle them properly. This is necessary for the
display controller to directly display buffers generated by the GPU.

This feature is intended to replace the dedicated IOCTL enabled
by TEGRA_STAGING and to provide a non-staging alternative to that
solution.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
(cherry picked from commit 5e91144dd702d068b22a75911c06104e56cb4858)

drivers/gpu/drm/tegra/drm.c
drivers/gpu/drm/tegra/fb.c
include/uapi/drm/drm_fourcc.h

index 8ab47b5..d6296ca 100644 (file)
@@ -160,6 +160,8 @@ static int tegra_drm_load(struct drm_device *drm, unsigned long flags)
        drm->mode_config.max_width = 4096;
        drm->mode_config.max_height = 4096;
 
+       drm->mode_config.allow_fb_modifiers = true;
+
        drm->mode_config.funcs = &tegra_drm_mode_funcs;
 
        err = tegra_drm_fb_prepare(drm);
index e6d71fa..f95fca0 100644 (file)
@@ -52,9 +52,26 @@ int tegra_fb_get_tiling(struct drm_framebuffer *framebuffer,
                        struct tegra_bo_tiling *tiling)
 {
        struct tegra_fb *fb = to_tegra_fb(framebuffer);
-
-       /* TODO: handle YUV formats? */
-       *tiling = fb->planes[0]->tiling;
+       uint64_t modifier = fb->base.modifier;
+
+       switch (fourcc_mod_tegra_mod(modifier)) {
+       case NV_FORMAT_MOD_TEGRA_TILED:
+               tiling->mode = TEGRA_BO_TILING_MODE_TILED;
+               tiling->value = 0;
+               break;
+
+       case NV_FORMAT_MOD_TEGRA_16BX2_BLOCK(0):
+               tiling->mode = TEGRA_BO_TILING_MODE_BLOCK;
+               tiling->value = fourcc_mod_tegra_param(modifier);
+               if (tiling->value > 5)
+                       return -EINVAL;
+               break;
+
+       default:
+               /* TODO: handle YUV formats? */
+               *tiling = fb->planes[0]->tiling;
+               break;
+       }
 
        return 0;
 }
index 2113b51..4dd478a 100644 (file)
@@ -275,6 +275,51 @@ extern "C" {
  */
 #define DRM_FORMAT_MOD_VIVANTE_SPLIT_SUPER_TILED fourcc_mod_code(VIVANTE, 4)
 
+
+/* NVIDIA Tegra frame buffer modifiers */
+
+/*
+ * Some modifiers take parameters, for example the number of vertical GOBs in
+ * a block. Reserve the lower 32 bits for parameters
+ */
+#define __fourcc_mod_tegra_mode_shift 32
+#define fourcc_mod_tegra_code(val, params) \
+       fourcc_mod_code(NV, ((((__u64)val) << __fourcc_mod_tegra_mode_shift) | params))
+#define fourcc_mod_tegra_mod(m) \
+       (m & ~((1ULL << __fourcc_mod_tegra_mode_shift) - 1))
+#define fourcc_mod_tegra_param(m) \
+       (m & ((1ULL << __fourcc_mod_tegra_mode_shift) - 1))
+
+/*
+ * Tegra Tiled Layout, used by Tegra 2, 3 and 4.
+ *
+ * Pixels are arranged in simple tiles of 16 x 16 bytes.
+ */
+#define NV_FORMAT_MOD_TEGRA_TILED fourcc_mod_tegra_code(1, 0)
+
+/*
+ * Tegra 16Bx2 Block Linear layout, used by TK1/TX1
+ *
+ * Pixels are arranged in 64x8 Groups Of Bytes (GOBs). GOBs are then stacked
+ * vertically by a power of 2 (1 to 32 GOBs) to form a block.
+ *
+ * Within a GOB, data is ordered as 16B x 2 lines sectors laid in Z-shape.
+ *
+ * Parameter 'v' is the log2 encoding of the number of GOBs stacked vertically.
+ * Valid values are:
+ *
+ * 0 == ONE_GOB
+ * 1 == TWO_GOBS
+ * 2 == FOUR_GOBS
+ * 3 == EIGHT_GOBS
+ * 4 == SIXTEEN_GOBS
+ * 5 == THIRTYTWO_GOBS
+ *
+ * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format
+ * in full detail.
+ */
+#define NV_FORMAT_MOD_TEGRA_16BX2_BLOCK(v) fourcc_mod_tegra_code(2, v)
+
 #if defined(__cplusplus)
 }
 #endif