MLK-14624 cpufreq: imx6q: imx6ull should use the same flow as imx6ul

This fixes an issue with imx6ull where setting the frequency to 528Mhz
would actually set the ARM clock to 324Mhz.

Signed-off-by: Octavian Purdila <octavian.purdila@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 17af8e7..850601e 100644 (file)
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -145,7 +145,8 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
         *  - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
         *  - Disable pll2_pfd2_396m_clk
         */
-       if (of_machine_is_compatible("fsl,imx6ul")) {
+       if (of_machine_is_compatible("fsl,imx6ul") ||
+           of_machine_is_compatible("fsl,imx6ull")) {
                /*
                 * When changing pll1_sw_clk's parent to pll1_sys_clk,
                 * CPU may run at higher than 528MHz, this will lead to
@@ -343,7 +344,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
                goto put_clk;
        }
 
-       if (of_machine_is_compatible("fsl,imx6ul")) {
+       if (of_machine_is_compatible("fsl,imx6ul") ||
+           of_machine_is_compatible("fsl,imx6ull")) {
                pll2_bus_clk = clk_get(cpu_dev, "pll2_bus");
                secondary_sel_clk = clk_get(cpu_dev, "secondary_sel");
                if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) {