LF-695 arm: dts: imx6qdl-sabreauto: increase the drive strength for usdhc1

On sabreauto board, the usdhc1 is connected to the base board, to
make sd card work stable on base board sd slot, need to increase
the I/O drive strength.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 25e04aa..2a889b2 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -928,12 +928,12 @@
 
                pinctrl_usdhc1: usdhc1grp {
                        fsl,pins = <
-                               MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17059
-                               MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10059
-                               MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17059
-                               MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17059
-                               MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17059
-                               MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17059
+                               MX6QDL_PAD_SD1_CMD__SD1_CMD             0x170f9
+                               MX6QDL_PAD_SD1_CLK__SD1_CLK             0x100f9
+                               MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x170f9
+                               MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x170f9
+                               MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x170f9
+                               MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x170f9
                        >;
                };