serial: tegra: add internal loopback functionality

Add the internal loopback functionality that can be enabled with
TIOCM_LOOP.

Signed-off-by: Andreas Abel <aabel@nvidia.com>
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/1565609303-27000-2-git-send-email-kyarlagadda@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 76ffbc7..83cc8dc 100644 (file)
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -4,7 +4,7 @@
  *
  * High-speed serial driver for NVIDIA Tegra SoCs
  *
- * Copyright (c) 2012-2013, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2012-2019, NVIDIA CORPORATION.  All rights reserved.
  *
  * Author: Laxman Dewangan <ldewangan@nvidia.com>
  */
@@ -192,16 +192,34 @@ static void set_dtr(struct tegra_uart_port *tup, bool active)
        }
 }
 
+static void set_loopbk(struct tegra_uart_port *tup, bool active)
+{
+       unsigned long mcr = tup->mcr_shadow;
+
+       if (active)
+               mcr |= UART_MCR_LOOP;
+       else
+               mcr &= ~UART_MCR_LOOP;
+
+       if (mcr != tup->mcr_shadow) {
+               tegra_uart_write(tup, mcr, UART_MCR);
+               tup->mcr_shadow = mcr;
+       }
+}
+
 static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
 {
        struct tegra_uart_port *tup = to_tegra_uport(u);
-       int dtr_enable;
+       int enable;
 
        tup->rts_active = !!(mctrl & TIOCM_RTS);
        set_rts(tup, tup->rts_active);
 
-       dtr_enable = !!(mctrl & TIOCM_DTR);
-       set_dtr(tup, dtr_enable);
+       enable = !!(mctrl & TIOCM_DTR);
+       set_dtr(tup, enable);
+
+       enable = !!(mctrl & TIOCM_LOOP);
+       set_loopbk(tup, enable);
 }
 
 static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)