MIPS: BMIPS: Add support UART, I2C, SATA device

Add UART, I2C, SATA device tree nodes on Broadcom BCM7xxx MIPS-based
platforms.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13016/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 3ae1605..550e1d9 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -85,14 +85,15 @@
                        compatible = "brcm,bcm7120-l2-intc";
                        reg = <0x406780 0x8>;
 
-                       brcm,int-map-mask = <0x44>;
+                       brcm,int-map-mask = <0x44>, <0xf000000>;
                        brcm,int-fwd-mask = <0x70000>;
 
                        interrupt-controller;
                        #interrupt-cells = <1>;
 
                        interrupt-parent = <&periph_intc>;
-                       interrupts = <18>;
+                       interrupts = <18>, <19>;
+                       interrupt-names = "upg_main", "upg_bsc";
                };
 
                sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,70 @@
                        status = "disabled";
                };
 
+               uart1: serial@406b40 {
+                       compatible = "ns16550a";
+                       reg = <0x406b40 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       native-endian;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <64>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               uart2: serial@406b80 {
+                       compatible = "ns16550a";
+                       reg = <0x406b80 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       native-endian;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <65>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               bsca: i2c@406200 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406200 0x58>;
+                     interrupts = <24>;
+                     interrupt-names = "upg_bsca";
+                     status = "disabled";
+               };
+
+               bscb: i2c@406280 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406280 0x58>;
+                     interrupts = <25>;
+                     interrupt-names = "upg_bscb";
+                     status = "disabled";
+               };
+
+               bscc: i2c@406300 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406300 0x58>;
+                     interrupts = <26>;
+                     interrupt-names = "upg_bscc";
+                     status = "disabled";
+               };
+
+               bscd: i2c@406380 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406380 0x58>;
+                     interrupts = <27>;
+                     interrupt-names = "upg_bscd";
+                     status = "disabled";
+               };
+
                ehci0: usb@488300 {
                        compatible = "brcm,bcm7125-ehci", "generic-ehci";
                        reg = <0x488300 0x100>;

diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index be79919..2a6efe6 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -24,8 +24,6 @@
 
        aliases {
                uart0 = &uart0;
-               uart1 = &uart1;
-               uart2 = &uart2;
        };
 
        cpu_intc: cpu_intc {

diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 060805b..ca57fb5 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -18,8 +18,6 @@
 
        aliases {
                uart0 = &uart0;
-               uart1 = &uart1;
-               uart2 = &uart2;
        };
 
        cpu_intc: cpu_intc {

diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index bcdb09b..1c0c3d4 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -18,8 +18,6 @@
 
        aliases {
                uart0 = &uart0;
-               uart1 = &uart1;
-               uart2 = &uart2;
        };
 
        cpu_intc: cpu_intc {
@@ -241,5 +239,45 @@
                        interrupts = <66>;
                        status = "disabled";
                };
+
+               sata: sata@181000 {
+                       compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+                       reg-names = "ahci", "top-ctrl";
+                       reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <86>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       sata0: sata-port@0 {
+                               reg = <0>;
+                               phys = <&sata_phy0>;
+                       };
+
+                       sata1: sata-port@1 {
+                               reg = <1>;
+                               phys = <&sata_phy1>;
+                       };
+               };
+
+               sata_phy: sata-phy@180100 {
+                       compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+                       reg = <0x180100 0x0eff>;
+                       reg-names = "phy";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       sata_phy0: sata-phy@0 {
+                               reg = <0>;
+                               #phy-cells = <0>;
+                       };
+
+                       sata_phy1: sata-phy@1 {
+                               reg = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
        };
 };

diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index d3b1b76..4153e08 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -24,8 +24,6 @@
 
        aliases {
                uart0 = &uart0;
-               uart1 = &uart1;
-               uart2 = &uart2;
        };
 
        cpu_intc: cpu_intc {

diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 3302a1b..0586bf6 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -86,14 +86,15 @@
                        compatible = "brcm,bcm7120-l2-intc";
                        reg = <0x406780 0x8>;
 
-                       brcm,int-map-mask = <0x44>;
+                       brcm,int-map-mask = <0x44>, <0x1f000000>;
                        brcm,int-fwd-mask = <0x70000>;
 
                        interrupt-controller;
                        #interrupt-cells = <1>;
 
                        interrupt-parent = <&periph_intc>;
-                       interrupts = <18>;
+                       interrupts = <18>, <19>;
+                       interrupt-names = "upg_main", "upg_bsc";
                };
 
                sun_top_ctrl: syscon@404000 {
@@ -118,6 +119,78 @@
                        status = "disabled";
                };
 
+               uart1: serial@406b40 {
+                       compatible = "ns16550a";
+                       reg = <0x406b40 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <64>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               uart2: serial@406b80 {
+                       compatible = "ns16550a";
+                       reg = <0x406b80 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <65>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               bsca: i2c@406200 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406200 0x58>;
+                     interrupts = <24>;
+                     interrupt-names = "upg_bsca";
+                     status = "disabled";
+               };
+
+               bscb: i2c@406280 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406280 0x58>;
+                     interrupts = <25>;
+                     interrupt-names = "upg_bscb";
+                     status = "disabled";
+               };
+
+               bscc: i2c@406300 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406300 0x58>;
+                     interrupts = <26>;
+                     interrupt-names = "upg_bscc";
+                     status = "disabled";
+               };
+
+               bscd: i2c@406380 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406380 0x58>;
+                     interrupts = <27>;
+                     interrupt-names = "upg_bscd";
+                     status = "disabled";
+               };
+
+               bsce: i2c@406800 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406800 0x58>;
+                     interrupts = <28>;
+                     interrupt-names = "upg_bsce";
+                     status = "disabled";
+               };
+
                enet0: ethernet@468000 {
                        phy-mode = "internal";
                        phy-handle = <&phy1>;

diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 15b27aa..8533979 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -87,14 +87,32 @@
                        compatible = "brcm,bcm7120-l2-intc";
                        reg = <0x406780 0x8>;
 
-                       brcm,int-map-mask = <0x44>;
+                       brcm,int-map-mask = <0x44>, <0x7000000>;
                        brcm,int-fwd-mask = <0x70000>;
 
                        interrupt-controller;
                        #interrupt-cells = <1>;
 
                        interrupt-parent = <&periph_intc>;
-                       interrupts = <55>;
+                       interrupts = <55>, <53>;
+                       interrupt-names = "upg_main", "upg_bsc";
+               };
+
+               upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+                       compatible = "brcm,bcm7120-l2-intc";
+                       reg = <0x409480 0x8>;
+
+                       brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+                       brcm,int-fwd-mask = <0>;
+                       brcm,irq-can-wake;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <56>, <54>, <59>;
+                       interrupt-names = "upg_main_aon", "upg_bsc_aon",
+                                         "upg_spi";
                };
 
                sun_top_ctrl: syscon@404000 {
@@ -119,6 +137,78 @@
                        status = "disabled";
                };
 
+               uart1: serial@406b40 {
+                       compatible = "ns16550a";
+                       reg = <0x406b40 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <62>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               uart2: serial@406b80 {
+                       compatible = "ns16550a";
+                       reg = <0x406b80 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <63>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               bsca: i2c@409180 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_aon_irq0_intc>;
+                     reg = <0x409180 0x58>;
+                     interrupts = <27>;
+                     interrupt-names = "upg_bsca";
+                     status = "disabled";
+               };
+
+               bscb: i2c@409400 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_aon_irq0_intc>;
+                     reg = <0x409400 0x58>;
+                     interrupts = <28>;
+                     interrupt-names = "upg_bscb";
+                     status = "disabled";
+               };
+
+               bscc: i2c@406200 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406200 0x58>;
+                     interrupts = <24>;
+                     interrupt-names = "upg_bscc";
+                     status = "disabled";
+               };
+
+               bscd: i2c@406280 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406280 0x58>;
+                     interrupts = <25>;
+                     interrupt-names = "upg_bscd";
+                     status = "disabled";
+               };
+
+               bsce: i2c@406300 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406300 0x58>;
+                     interrupts = <26>;
+                     interrupt-names = "upg_bsce";
+                     status = "disabled";
+               };
+
                enet0: ethernet@b80000 {
                        phy-mode = "internal";
                        phy-handle = <&phy1>;

diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index a1757ef..cce752b 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -102,14 +102,32 @@
                        compatible = "brcm,bcm7120-l2-intc";
                        reg = <0x406780 0x8>;
 
-                       brcm,int-map-mask = <0x44>;
+                       brcm,int-map-mask = <0x44>, <0x7000000>;
                        brcm,int-fwd-mask = <0x70000>;
 
                        interrupt-controller;
                        #interrupt-cells = <1>;
 
                        interrupt-parent = <&periph_intc>;
-                       interrupts = <60>;
+                       interrupts = <60>, <58>;
+                       interrupt-names = "upg_main", "upg_bsc";
+               };
+
+               upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+                       compatible = "brcm,bcm7120-l2-intc";
+                       reg = <0x409480 0x8>;
+
+                       brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+                       brcm,int-fwd-mask = <0>;
+                       brcm,irq-can-wake;
+
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <61>, <59>, <64>;
+                       interrupt-names = "upg_main_aon", "upg_bsc_aon",
+                                         "upg_spi";
                };
 
                sun_top_ctrl: syscon@404000 {
@@ -134,6 +152,78 @@
                        status = "disabled";
                };
 
+               uart1: serial@406b40 {
+                       compatible = "ns16550a";
+                       reg = <0x406b40 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <67>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               uart2: serial@406b80 {
+                       compatible = "ns16550a";
+                       reg = <0x406b80 0x20>;
+                       reg-io-width = <0x4>;
+                       reg-shift = <0x2>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <68>;
+                       clocks = <&uart_clk>;
+                       status = "disabled";
+               };
+
+               bsca: i2c@406300 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406300 0x58>;
+                     interrupts = <26>;
+                     interrupt-names = "upg_bsca";
+                     status = "disabled";
+               };
+
+               bscb: i2c@409400 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_aon_irq0_intc>;
+                     reg = <0x409400 0x58>;
+                     interrupts = <28>;
+                     interrupt-names = "upg_bscb";
+                     status = "disabled";
+               };
+
+               bscc: i2c@406200 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406200 0x58>;
+                     interrupts = <24>;
+                     interrupt-names = "upg_bscc";
+                     status = "disabled";
+               };
+
+               bscd: i2c@406280 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_irq0_intc>;
+                     reg = <0x406280 0x58>;
+                     interrupts = <25>;
+                     interrupt-names = "upg_bscd";
+                     status = "disabled";
+               };
+
+               bsce: i2c@409180 {
+                     clock-frequency = <390000>;
+                     compatible = "brcm,brcmstb-i2c";
+                     interrupt-parent = <&upg_aon_irq0_intc>;
+                     reg = <0x409180 0x58>;
+                     interrupts = <27>;
+                     interrupt-names = "upg_bsce";
+                     status = "disabled";
+               };
+
                enet0: ethernet@b80000 {
                        phy-mode = "internal";
                        phy-handle = <&phy1>;
@@ -236,5 +326,45 @@
                        interrupts = <78>;
                        status = "disabled";
                };
+
+               sata: sata@181000 {
+                       compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+                       reg-names = "ahci", "top-ctrl";
+                       reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <45>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       sata0: sata-port@0 {
+                               reg = <0>;
+                               phys = <&sata_phy0>;
+                       };
+
+                       sata1: sata-port@1 {
+                               reg = <1>;
+                               phys = <&sata_phy1>;
+                       };
+               };
+
+               sata_phy: sata-phy@180100 {
+                       compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+                       reg = <0x180100 0x0eff>;
+                       reg-names = "phy";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       sata_phy0: sata-phy@0 {
+                               reg = <0>;
+                               #phy-cells = <0>;
+                       };
+
+                       sata_phy1: sata-phy@1 {
+                               reg = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
        };
 };

diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index e046b11..f2449d1 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -21,6 +21,30 @@
        status = "okay";
 };
 
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&bsca {
+       status = "okay";
+};
+
+&bscb {
+       status = "okay";
+};
+
+&bscc {
+       status = "okay";
+};
+
+&bscd {
+       status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
        status = "disabled";

diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index d48462e..73124be 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -56,3 +56,11 @@
 &ohci0 {
        status = "okay";
 };
+
+&sata {
+       status = "okay";
+};
+
+&sata_phy {
+       status = "okay";
+};

diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 67fe1f3..600d57a 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -23,6 +23,34 @@
        status = "okay";
 };
 
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&bsca {
+       status = "okay";
+};
+
+&bscb {
+       status = "okay";
+};
+
+&bscc {
+       status = "okay";
+};
+
+&bscd {
+       status = "okay";
+};
+
+&bsce {
+       status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
        status = "disabled";

diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 689c68a..119c714 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -23,6 +23,34 @@
        status = "okay";
 };
 
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&bsca {
+       status = "okay";
+};
+
+&bscb {
+       status = "okay";
+};
+
+&bscc {
+       status = "okay";
+};
+
+&bscd {
+       status = "okay";
+};
+
+&bsce {
+       status = "okay";
+};
+
 &enet0 {
        status = "okay";
 };

diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 68f486e..43e3ba2 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -23,6 +23,34 @@
        status = "okay";
 };
 
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&bsca {
+       status = "okay";
+};
+
+&bscb {
+       status = "okay";
+};
+
+&bscc {
+       status = "okay";
+};
+
+&bscd {
+       status = "okay";
+};
+
+&bsce {
+       status = "okay";
+};
+
 &enet0 {
        status = "okay";
 };
@@ -58,3 +86,11 @@
 &ohci3 {
        status = "okay";
 };
+
+&sata {
+       status = "okay";
+};
+
+&sata_phy {
+       status = "okay";
+};