arm: dts: add gpmi weim dts for imx6q sabreauto

add gpmi weim dts for imx6q sabreauto

Signed-off-by: Han Xu <han.xu@nxp.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05e1b6e..7c5a95f 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -564,6 +564,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-sabreauto-enetirq.dtb \
        imx6q-sabreauto-flexcan1.dtb \
        imx6q-sabreauto-ecspi.dtb \
+       imx6q-sabreauto-gpmi-weim.dtb \
        imx6q-sabrelite.dtb \
        imx6q-sabresd.dtb \
        imx6q-sabresd-btwifi.dtb \

diff --git a/arch/arm/boot/dts/imx6q-sabreauto-gpmi-weim.dts b/arch/arm/boot/dts/imx6q-sabreauto-gpmi-weim.dts
new file mode 100644 (file)
index 0000000..bbeb105
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto-gpmi-weim.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+
+#include "imx6q-sabreauto.dts"
+
+&ecspi1 {
+       /* pin conflict with weim */
+       status = "disabled";
+};
+
+&can2 {
+       /* max7310_c on i2c3 is gone */
+       status = "disabled";
+};
+
+&gpmi {
+       status = "okay";
+};
+
+&i2c3 {
+       /* pin conflict with weim */
+       status = "disabled";
+};
+
+&uart3 {
+       /* pin conflict with gpmi and weim */
+       status = "disabled";
+};
+
+&usbh1 {
+       /* max7310_b on i2c3 is gone */
+       status = "disabled";
+};
+
+&usbotg {
+       /* max7310_c on i2c3 is gone */
+       status = "okay";
+       dr_mode = "peripheral";
+};
+
+&weim {
+       pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};