LF-3861 arm64: dts: imx8mm/n-evk: disable over current for usb1

Since imx8mm and imx8mn evk base board does not support over current
detection for usb1, so disable it.

Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a64839d..468f65b 100755 (executable)
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -660,6 +660,7 @@
        srp-disable;
        adp-disable;
        usb-role-switch;
+       disable-over-current;
        samsung,picophy-pre-emp-curr-control = <3>;
        samsung,picophy-dc-vol-level-adjust = <7>;
        status = "okay";

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index aa4f1f2..a9df2e0 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -498,6 +498,7 @@
        srp-disable;
        adp-disable;
        usb-role-switch;
+       disable-over-current;
        samsung,picophy-pre-emp-curr-control = <3>;
        samsung,picophy-dc-vol-level-adjust = <7>;
        status = "okay";