ARM: imx6ull-somdevices.dtsi: Add suport to WILC3000.

Signed-off-by: Josep Orga <jorga@somdevices.com>

diff --git a/arch/arm/boot/dts/imx6ull-somdevices.dtsi b/arch/arm/boot/dts/imx6ull-somdevices.dtsi
index 53ae501..24106a3 100644 (file)
--- a/arch/arm/boot/dts/imx6ull-somdevices.dtsi
+++ b/arch/arm/boot/dts/imx6ull-somdevices.dtsi
@@ -362,7 +362,6 @@
        pinctrl_i2c1: i2c1grp {
                fsl,pins = <
                        MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x4001b8b0
-                       MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x4001b8b0
                >;
        };
 
@@ -453,12 +452,12 @@
 
        pinctrl_usdhc1: usdhc1grp {
                fsl,pins = <
-                       MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
-                       MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
-                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
-                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
-                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
-                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+                       MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17071
+                       MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x17071
+                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17071
+                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17071
+                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17071
+                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17071
                >;
        };
 
@@ -571,6 +570,7 @@
                                        fsl,pins = <
                                                        MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06     0x10071
                                                        MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07     0x10071
+                                                       MX6UL_PAD_GPIO1_IO03__REF_CLK_32K 0x1b0b0
                                        >;
                        };
 
@@ -688,7 +688,7 @@
 
 &usdhc1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+       pinctrl-0 = <&pinctrl_usdhc1>;
        mmc-pwrseq = <&wifi_pwrseq>;
        cap-power-off-card;
        non-removable;
@@ -697,7 +697,7 @@
        #address-cells = <1>;
        #size-cells = <0>;
        wilc_sdio: wilc_sdio@0{
-               compatible = "microchip,wilc1000";
+               compatible = "microchip,wilc3000";
                pinctrl-0 = <&pinctrl_wifi_en>;
                irq-gpios = <&gpio1 19 IRQ_TYPE_EDGE_FALLING>;
                status = "okay";