arm: dts: Removed not used peripherals.

Signed-off-by: Josep Orga <jorga@somdevices.com>

diff --git a/arch/arm/dts/imx6ull-somdevices.dts b/arch/arm/dts/imx6ull-somdevices.dts
index 97dcb08..6b790f7 100644 (file)
--- a/arch/arm/dts/imx6ull-somdevices.dts
+++ b/arch/arm/dts/imx6ull-somdevices.dts
@@ -52,33 +52,10 @@
                compatible = "simple-bus";
                #address-cells = <1>;
                #size-cells = <0>;
-
-               reg_sd1_vmmc: regulator@1 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "VSD_3V3";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-                       u-boot,off-on-delay-us = <20000>;
-                       enable-active-high;
-               };
-
-               reg_gpio_dvfs: regulator-gpio {
-                       compatible = "regulator-gpio";
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&pinctrl_dvfs>;
-                       regulator-min-microvolt = <1300000>;
-                       regulator-max-microvolt = <1400000>;
-                       regulator-name = "gpio_dvfs";
-                       regulator-type = "voltage";
-                       gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
-                       states = <1300000 0x1 1400000 0x0>;
-               };
        };
 };
 
 &cpu0 {
-       dc-supply = <&reg_gpio_dvfs>;
 };
 
 &clks {
@@ -87,7 +64,7 @@
 };
 
 &csi {
-       status = "okay";
+       status = "disabled";
 };
 
 &fec1 {
@@ -116,12 +93,6 @@
        status = "okay";
 };
 
-&flexcan2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_flexcan2>;
-       status = "okay";
-};
-
 &gpc {
        fsl,cpu_pupscr_sw2iso = <0xf>;
        fsl,cpu_pupscr_sw = <0x0>;
@@ -211,13 +182,6 @@
                        >;
                };
 
-               pinctrl_flexcan2: flexcan2grp{
-                       fsl,pins = <
-                               MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX      0x1b020
-                               MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX      0x1b020
-                       >;
-               };
-
                pinctrl_i2c2: i2c2grp {
                        fsl,pins = <
                                MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
@@ -276,17 +240,6 @@
                        >;
                };
 
-               pinctrl_qspi: qspigrp {
-                       fsl,pins = <
-                               MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
-                               MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
-                               MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
-                               MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
-                               MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
-                               MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
-                       >;
-               };
-
                pinctrl_sai2: sai2grp {
                        fsl,pins = <
                                MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK        0x17088
@@ -427,42 +380,16 @@
 
 &iomuxc_snvs {
        pinctrl-names = "default_snvs";
-        pinctrl-0 = <&pinctrl_hog_2>;
-        imx6ul-evk {
-               pinctrl_hog_2: hoggrp-2 {
-                        fsl,pins = <
-                                MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x80000000
-                                MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10       0x1b0b0 //FEC1
-                                MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11       0x1b0b0 //FEC2
-                        >;
-                };
-
-               pinctrl_dvfs: dvfsgrp {
-                        fsl,pins = <
-                                MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x79
-                        >;
-                };
-               
-               pinctrl_lcdif_reset: lcdifresetgrp {
-                        fsl,pins = <
-                                /* used for lcd reset */
-                                MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
-                        >;
-                };
-
-               pinctrl_spi4: spi4grp {
-                        fsl,pins = <
-                                MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x70a1
-                                MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x80000000
-                        >;
-                };
-
-                pinctrl_sai2_hp_det_b: sai2_hp_det_grp {
-                        fsl,pins = <
-                                MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04   0x17059
-                        >;
-                };
-        };
+       pinctrl-0 = <&pinctrl_hog_2>;
+       imx6ul-evk {
+       pinctrl_hog_2: hoggrp-2 {
+                       fsl,pins = <
+                               MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x80000000
+                               MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10       0x1b0b0 //FEC1
+                               MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11       0x1b0b0 //FEC2
+                       >;
+               };
+       };
 };
 
 
@@ -510,33 +437,16 @@
        status = "okay";
 };
 
-&qspi {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_qspi>;
-       status = "okay";
-       ddrsmp=<0>;
-
-       flash0: n25q256a@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "micron,n25q256a", "jedec,spi-nor";
-               spi-max-frequency = <29000000>;
-               spi-nor,ddr-quad-read-dummy = <6>;
-               reg = <0>;
-       };
-};
-
 &sai2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sai2
-                    &pinctrl_sai2_hp_det_b>;
+       pinctrl-0 = <&pinctrl_sai2>;
 
        assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
                          <&clks IMX6UL_CLK_SAI2>;
        assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
        assigned-clock-rates = <0>, <12288000>;
 
-       status = "okay";
+       status = "disabled";
 };
 
 &uart1 {
@@ -587,7 +497,6 @@
        cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
        keep-power-in-suspend;
        enable-sdio-wakeup;
-       vmmc-supply = <&reg_sd1_vmmc>;
        status = "okay";
 };