MLK-17804-3: dts: change gpio pin for qm ov5640 sensor

Because ov5640 need power and rest pin, so replace mipi
csi gpio with generic gpio controller pins.

Reviewed-by: sandor.yu <sand.yu@nxp.com>
Signed-off-by: Guoniu.Zhou <guoniu.zhou@nxp.com>
(cherry picked from commit b2bca258493d10028beb127480c58e66400465fb)

diff --git a/arch/arm64/boot/dts/freescale/fsl-imx8qm-mek-mipi-csi2.dts b/arch/arm64/boot/dts/freescale/fsl-imx8qm-mek-mipi-csi2.dts
index 812fcae..0f2f4fd 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-imx8qm-mek-mipi-csi2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-imx8qm-mek-mipi-csi2.dts
@@ -52,8 +52,8 @@
                clocks = <&clk IMX8QM_CLK_DUMMY>;
                clock-names = "csi_mclk";
                csi_id = <0>;
-               pwn-gpios = <&gpio0_mipi_csi0 1 GPIO_ACTIVE_LOW>;
-               rst-gpios = <&gpio0_mipi_csi0 0 GPIO_ACTIVE_HIGH>;
+               pwn-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+               rst-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
                mclk = <24000000>;
                mclk_source = <0>;
                mipi_csi;