MLK-22673: sdp: Change bInterval of interrupt endpoint to 3

Since the USB HID limits the maximum bandwidth(3072) for interrupt
endpoint transfers, when the bInterval set to 1, we can only support 3
boards to run sdp at the same time. In order to support more boards,
change the bInterval of interrupt endpoint to 3, which will not affect
the transmission speed.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit beb0283e6bac3d42cc87757e3c0e200e2ac3b68f)

diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index 3f9d174..941e8b0 100644 (file)
--- a/drivers/usb/gadget/f_sdp.c
+++ b/drivers/usb/gadget/f_sdp.c
@@ -182,7 +182,7 @@ static struct usb_endpoint_descriptor in_hs_desc = {
        .bEndpointAddress =     1 | USB_DIR_IN,
        .bmAttributes = USB_ENDPOINT_XFER_INT,
        .wMaxPacketSize =       512,
-       .bInterval =            1,
+       .bInterval =            3,
 };
 
 static struct usb_endpoint_descriptor out_hs_desc = {
@@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor out_hs_desc = {
        .bEndpointAddress =     1 | USB_DIR_OUT,
        .bmAttributes =         USB_ENDPOINT_XFER_INT,
        .wMaxPacketSize =       SDP_HID_PACKET_SIZE_EP1,
-       .bInterval =            1,
+       .bInterval =            3,
 };
 
 static struct usb_descriptor_header *sdp_runtime_descs[] = {