ARM: dts: s5pv210: use defines for GPIO flags in Goni

Replace hard-coded flags with defines for readability.  No functional
change.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-18-krzk@kernel.org

diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c8714bf..77d1c51 100644 (file)
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "s5pv210.dtsi"
 
@@ -51,7 +52,7 @@
                        regulator-min-microvolt = <2800000>;
                        regulator-max-microvolt = <2800000>;
                        reg = <0>;
-                       gpio = <&mp05 4 0>;
+                       gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
 
@@ -77,15 +78,15 @@
                        regulator-min-microvolt = <2800000>;
                        regulator-max-microvolt = <2800000>;
                        reg = <3>;
-                       gpio = <&gpj1 3 0>;
+                       gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
                };
        };
 
        i2c_pmic: i2c-pmic {
                compatible = "i2c-gpio";
-               gpios = <&gpj4 0 0>, /* sda */
-                       <&gpj4 3 0>; /* scl */
+               gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>, /* sda */
+                       <&gpj4 3 GPIO_ACTIVE_HIGH>; /* scl */
                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
                #address-cells = <1>;
                #size-cells = <0>;
@@ -95,13 +96,13 @@
                        reg = <0x66>;
 
                        max8998,pmic-buck1-default-dvs-idx = <0>;
-                       max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-                                                       <&gph0 4 0>;
+                       max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+                                                       <&gph0 4 GPIO_ACTIVE_HIGH>;
                        max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
                                                        <1200000>, <1200000>;
 
                        max8998,pmic-buck2-default-dvs-idx = <0>;
-                       max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+                       max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
                        max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
 
                        regulators {
@@ -395,8 +396,8 @@
                clock-frequency = <16000000>;
                clocks = <&camera 0>;
                clock-names = "mclk";
-               nreset-gpios = <&gpb 2 0>;
-               nstby-gpios = <&gpb 0 0>;
+               nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>;
+               nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>;
 
                port {
                        noon010pc30_ep: endpoint {