MLK-20346 usb: chipidea: change power_lost workqueue as freezable

MLK-20346 usb: chipidea: change power_lost workqueue as freezable

Like commit d144dfea8af7 ("usb: chipidea: otg: change workqueue
ci_otg as freezable"), the power_lost work item may try to remove
hcd if controller is powered off during the system suspend, and
the similar deadlock happens, see below dumps.

Meanwhile, with this change, we need to disable USB interrupt
during the work item runs (after driver resume has finished),
otherwise, USB transfer will be timeout (5s) due to USB interrupt
is disabled and IAA watchdog is still not ready at that time.

Workqueue: events ci_power_lost_work
Call trace:
[<ffff000008085c44>] __switch_to+0x8c/0xd0
[<ffff000008d7bbf4>] __schedule+0x19c/0x5d8
[<ffff000008d7c068>] schedule+0x38/0xa0
[<ffff000008d7f3b4>] schedule_timeout+0x19c/0x338
[<ffff000008d7cc10>] wait_for_common+0xa0/0x148
[<ffff000008d7cccc>] wait_for_completion+0x14/0x20
[<ffff0000080e6040>] flush_work+0xd8/0x1f0
[<ffff0000080e61f4>] flush_delayed_work+0x3c/0x48
[<ffff0000081ae1c8>] wb_shutdown+0x90/0xd0
[<ffff0000081ae688>] bdi_unregister+0x58/0x1c0
[<ffff000008413a60>] del_gendisk+0x218/0x228
[<ffff00000871683c>] sd_remove+0x64/0xc0
[<ffff0000086b6eec>] device_release_driver_internal+0x154/0x1f0
[<ffff0000086b6f9c>] device_release_driver+0x14/0x20
[<ffff0000086b5d40>] bus_remove_device+0xc8/0x108
[<ffff0000086b2a08>] device_del+0x1f8/0x300
[<ffff0000087049ec>] __scsi_remove_device+0xec/0x128
[<ffff000008702c70>] scsi_forget_host+0x70/0x78
[<ffff0000086f7ee8>] scsi_remove_host+0xa0/0x140
[<ffff0000088e0588>] usb_stor_disconnect+0x50/0xc0
[<ffff00000887eab8>] usb_unbind_interface+0x78/0x280
[<ffff0000086b6eec>] device_release_driver_internal+0x154/0x1f0
[<ffff0000086b6f9c>] device_release_driver+0x14/0x20
[<ffff0000086b5d40>] bus_remove_device+0xc8/0x108
[<ffff0000086b2a08>] device_del+0x1f8/0x300
[<ffff00000887c364>] usb_disable_device+0xa4/0x210
[<ffff000008872cfc>] usb_disconnect+0x7c/0x240
[<ffff000008872e40>] usb_disconnect+0x1c0/0x240
[<ffff000008878e10>] usb_remove_hcd+0xc0/0x1d8
[<ffff0000088e7bac>] host_stop+0x34/0x90
[<ffff0000088e4088>] ci_handle_id_switch+0x70/0x1d0
[<ffff0000088e3038>] ci_power_lost_work+0x90/0xa8
[<ffff0000080e7100>] process_one_work+0x1e0/0x340
[<ffff0000080e72b0>] worker_thread+0x50/0x458
[<ffff0000080ed32c>] kthread+0xfc/0x128
[<ffff000008084eb8>] ret_from_fork+0x10/0x18

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit d217dacbe793641497b38f48d063a6332242e8a9)
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>